Plumbing Code Part 2 Drainage Systems

Question 1

2. 1.2.1
   2) A combined building drain shall not be ________

Answer 1

installed

Question 2

2.1.2.4

Piping in any building connected to the public services shall be connected ______ from piping of the other building, except that an ancillary building on the same property may be served by the same service

Answer 2

separately

Question 3

2. 1.3.1.
   1) plumbing fixtures shall not be installed in a room that is not _____ and ventilated in accordance with the appropriate requirements in part three, six and nine of division B of the NBC

Answer 3

lighted

Question 4

2. 1.3.2
   1) every fixture, appliance, interceptor, clean out, valve, device or piece of equipment shall be located so that it is readily _______ for use, cleaning and maintenance

Answer 4

accessible

Question 5

2. 2.2.3.
   2) no more than ___ shower heads shall be served by a single shower drain

Answer 5

6

Question 6

2. 2.2.3
   4) except for column showers, when a battery of shower heads is installed, the horizontal distance between two adjacent shower heads shall not be less than ____mm

Answer 6

750mm

Question 7

2.2.2.4

A dishwashing sink and food preparation sink shall not have_________ overflows

Answer 7

concealed

Question 8

2. 2.3.1 Traps
   1a) traps shall have a trap seal depth of not less than ___ mm

Answer 8

38

Question 9

2. 2.3.1 Traps
   2) the trap seal depth on fixtures draining on an acid waste system shall be a minimum of ___ mm

Answer 9

50

Question 10

2. 2.3.1 Traps
   3) except for a floor mounted service sink, every trap that serves a lavatory, a sink or a laundry tray shall
   a) be provided with a _____ plug located at the lowest point of the trap out of the same material as the trap, except a cast iron trap shall be provided with a brass clean out plug

Answer 10

clean-out

Question 11

2. 2.3.1 Traps
   3) except for a floor mounted service sink, every trap that serves a lavatory, a sink or a laundry tray shall
   b) be designed so that part of the trap can be removed for

_____ purposes

Answer 11

cleaning

Question 12

2. 2.4.2
   1) A T fitting shall not be used in a drainage system, except to connect a _____ pipe

Answer 12

vent

Question 13

2. 2.4.1
   2) a cross fitting shall not be used in a _____ system

Answer 13

drainage

Question 14

2. 2.4.2
   1) Single or double sanitary tee fitting shall not be used in a nominally horizontal soil or waste pipe, except that a single sanitary tee fitting may be used to connect a ____ pipe

Answer 14

vent

Question 15

2. 2.4.2
   2) double sanitary tee fitting shall not be used to connect the trap arms of
   a) back outlet _____ _______ installed back to back

Answer 15

water closets

Question 16

2. 2.4.2
   2) double sanitary tee fitting shall not be used to connect the trap arms of
   b) two ______ where no clean outfitting is provided above the connection

Answer 16

urinals

Question 17

2. 2.5.1
   2) asbestos cement water pipe and fittings shall not be used ______ ground

Answer 17

above

Question 18

2. 2.5.2
   4) concrete pipe shall not be used above ground inside a_______

Answer 18

building

Question 19

2. 2.5.4
   2) polyethylene water pipe shall not be used except for a _____ _______ pipe

Answer 19

water service

Question 20

2. 2.5.7.
   4) PVC water pipe and fittings referred to in sentences one, two and three shall not be used in a ____ water system

Answer 20

hot

Question 21

2. 2.5.10
   2) ________ solvent cement shall only be used for joining an ABS drainage system to a PVC drainage system

Answer 21

transition

Question 22

2. 2.6.1
   2) cast iron soil pipe and fittings shall not be used in a _______ system

Answer 22

water

Question 23

2. 2.6.4
   2) threaded cast iron draiage fittings shall not be used in a_____ system

Answer 23

water

Question 24

2. 2.6.10
   1) a sheet-metal leader shall not be used except above ground _______ a building

Answer 24

outside