Partner Saw

Question 0

Can a saw with a carbide tip be used on metal window bars?

Answer 0

No

Question 1

Can a saw with a carbide tip be used on light sheet metal?

Answer 1

Yes

Question 2

What type blade for the saw would be used to cut open a metal security door?

Answer 2

Aluminum oxide blade

Question 3

What does a silicone carbide blade cut through?

Answer 3

Masonry materials

Question 4

Fuel tank of a saw is good for___ to ___ minutes of continual use.

Answer 4

20-30 min

Question 5

When should the saw be checked ?

Answer 5

At the beginning of each tour

Question 6

When should belt adjusting be done on the saw?

Answer 6

Weekly at mud and after ever cutting operation

Question 7

Where does the saw get sent for Major repairs

Answer 7

tech services

Question 8

If the saw blade continues to spin when in low idle what do you do?

Answer 8

Place the saw OOS it has a clutch problem

Question 9

When the carbide tip has ____ or more tips missing or broken or worn down to circumference of blade place OOS .

Answer 9

8 tips

Question 10

If a aluminum oxide blade is worn down to ___ inch diameter or less place it OOS .

Answer 10

8 inch Also badly nicked center hole wears out of round. OOS

Question 11

When operating the saw what does one slap on the back mean?

Answer 11

Stop cut

Question 12

When operating the saw what does 2 slaps on the back of the operator mean?

Answer 12

Cut

Question 13

When operating the saw what does 3 slaps on the back mean?

Answer 13

Shut down saw. 3 words 3 slaps

Question 14

What is the circle of danger when operating the saw?

Answer 14

20 ft radius

Question 15

Who can enter the circle of danger when operating a saw?

Answer 15

3 people officer backup man and the operator

Question 16

When cutting anything vertical with the saw what must we have?

Answer 16

Supervision of a officer

Question 17

Can the saw be refueled while it’s running?

Answer 17

Never

Question 18

How far apart should the operators feet be when using a saw?

Answer 18

18-20 inches boxer stance

Question 19

What’s a good indication you are hitting a beam on a roof when cutting?

Answer 19

Sparks

Question 20

When cutting on a roof and you hit a beam what should you do?

Answer 20

Move the saw to the inside of the cut

Question 21

When cutting the roof of a taxpayer what size hook should be brought to the roof?

Answer 21

10 ft hook

Question 22

What cut is the knock out cut when doing the coffin cut?

Answer 22

The 2 nd cut