OSHA Training Flashcards
what year was the OSH Act signed into law
1970
T/F: employers are not responsible for furnishing each employee a place of employment which is free of recognized hazards
False
what is OSHA’s highest inspection priority
Imminent danger
what are the 4 main types of OSHA violations
- Serious
- Repeated
- Other-than-serous
- Willful
which of the following would NVR be cited under OSHA’s multi-employer worksite policy?
Controlling
Employers must post the 300A summary form
Feb 1st -April 30th
The Right To Know is
Having the right to know hazardous materials and conditions on a job site
When an employee brings his/her own personal tools, equipment, or personal protective equipment on the job, who is responsible for ensuring the safety of such tools, equipment or personal protective equipment?
The employer
Guards on saws should be installed
at all times
what is considered conventional fall protection user the Subpart M?
- Guardrails
- Personal fall arrest system
Safety net
Which of the following is prohibited on a personal fall arrest system?
Body Belt
a controlled access zone consist of
Clearly marked boundaries
sign stating controlled access zone
a person designated as a safety monitor
At what height of fall protection requires as specified by the by the Duty to Have Fall Protection Standard?
six feet
when are workers allowed to work inside trusses?
After the first 3 trusses are set and braced properly
When should stairways/holes be protected
as soon as the hazard is created
At what height is fall protection required on scaffolds?
ten feet
what material is acceptable for scaffold planks
Plank stamped scaffold rated
Scaffold can be erected, moved, dismantled or altered_
under the supervision of a competent person
at what elevation should a stairway or ladder be provided at the point of access to a house or work area
19”
stairs must have a hand rail or stair rail system when the height and or riser is greater than___
4 or more risers or rising more than 30” which ever is less
what is are acceptable systems for cave-in protection in trenches?
sloping, benching, shoring
what is the minimum distance a spoil pile must be placed from an excavation?
Two feet
benching or sloping of trenches can not be used as a safety requirement in trenches over___ in depth
20 feet
It is acceptable to use an extension cord that is missing its gourd pin if:
it is not acceptable to use a cord missing a ground pin
T/F: a portable generator must be equipped with GFI protected receptacle or the contractor muse use a GFI protection device before using any electrical tools
True
Forklifts may be operated by NVR Project managers
NEVER
Crane operators must be:
Certified on the operation of a crane
T/F: Backhoe operators must be trained to operate the machine
True
Hoses for temporary propane heaters should be inspected
daily
Temporary Propane heaters need to be placed on:
- concrete floors
- Min of two 4x4 layers of 5/8 fire code drywall
- pads specifically designed for propane heater use
T/F: Propane tanks should never be placed inside of a house
True
