NAMP Ch. 9 Flashcards
Which system provides material in support of the operation and maintenance of aeronautical equipment?
Navy Supply System
What is assigned by the Uniform Material Movement and Issue Priority System (UMMIPS) to all Navy establishment activities for determining priorities for material support?
Force Activity Designator (FAD)
Which instruction contains instructions for using the material priority system and for assigning Force Activity Designators (FADs)?
OPNAVINST 4614.1
How often at a minimum must meetings be held between Supply, O and I level maintenance representatives, and unit Quality Assurance (QA) NAVDRP personnel to discuss Not Mission Capable Supply (PMCS), Engineering Investigation (EI)/Product Quality Deficiency Report (PQDR) exhibits, and other high priority related requirements?
Weekly
How often at a minimum must meeting be held between, Supply, O and I level maintenance representatives to resolve problems, establish local procedures, and to promote material support effectiveness?
Monthly
Which program was established at Navy Inventory Control Points (ICPs) to standardize previously existing programs for intensive management of high cost, critical aviation and shipboard repairable item?
Intensive Repairable Item Management (IRIM)
Which fund has the Department of Defense Comptroller approved Aviation Depot Level Repairable (AVDLR) financing through?
Navy Working Capital Fund (NWCF)
Which publication contains complete Advanced Traceability and Control (ATAC) procedures as well as exceptions to the program?
NAVSUP P-485
What will be used for shipping Engineering Investigation (EI) and Product Quality Deficiency Report (PQDR) exhibits?
Joint Deficiency Reporting System (JDRS)
The maintenance department must review Source, Maintenance, and Recoverability (SM&R) codes for accuracy and adequacy using the standard Individual Component Repair List (ICRL) and request changes per which instruction?
NAVSUPINST 4423.29
What is the highest tactical aviation command in the Fleet Marine Force (FMF)?
Marine Aircraft wing (MAW)
What is the smallest aviation unit designed for relatively independent operations with no outside assistance except access to a source of supply?
Marine Aircraft Group (MAG)
Which system can be used via message by afloat Supply Departments using shipboard communication facilities to transmit requisitions?
Streamlined Automated Logistics Transmission Systems (SALTS)
What is a procedure where all supply action documents in support of maintenance are entered and merged with material reporting history file for reporting to COMNAVAIRSYSCOM?
Material reporting
What is used to identify each type of supply action document?
RECTYPE
Where is weapon system costing accomplished?
Naval Supply Weapon Systems Support (NAVSUP WSS)
What is the process of determining the range and quantity of items that are required to support and maintain an end item of material for an initial period of service?
Provisioning
Which codes are used to communicate maintenance and supply instructions?
Source, Maintenance, and Recoverability (SM&R)
Which system is the authorized medium for directing and accomplishment and recording of modifications and one-time inspections of equipment?
Technical Directive Status Accounting (TDSA)
Which purpose codes will be used to identify an operating site’s fixed allowance material?
W and L
How often are Naval Supply Weapon Systems Support (NAVSUP WSS) controlled material allowances adjusted by Naval Supply Weapon Systems Support (NAVSUP WSS) for Transaction Item Report (TIR) activities?
Quarterly
Preliminary allowance documents are initially provided to air station Supply departments by Naval Supply Weapon Systems Support (NAVSUP WSS) as well as every how many years thereafter?
2
Which instruction contains detailed Operational Support Inventory (OSI) and Shore Consolidated Allowance List (SHORCAL) policy and procedures?
NAVICPINST 4441.16
Every how many months at a minimum must Marine Aircraft Group (MAG) Aviation Consolidated Allowance Lists (AVCALs) be reviewed and revised?
36
Which instruction contains detailed Operational Support Inventory (OSI) and Aviation Consolidated Allowance List (AVCAL)
NAVICPINST 4441.15
Which instruction governs aeronautical material outfitting and supply support of the operating forces?
OPNAVINST 4441.12
What were established and maintained to provide a retail outlet for non-technical supplies of an administrative and housekeeping nature?
SERVMARTs and MINIMARTs
Which type of material are items having a unit of issued greater than the unit of application categorized as?
Indirect
What is designed to provide users with the name, address, and socioeconomic data on all manufacturers and non manufacturers doing business with the federal government?
H4/H8
How many different types of organizations are addressed in H4/H8?
3
which publication establishes policies for the operation and management of afloat supply departments and shore-based units of the fleet operating forces under afloat procedures?
NAVSUP P-485 Volume I
Which publication lists current publications, directives, and forms used throughout the Navy that have stock numbers assigned?
NAVICP P-2003
Which instruction provides information to assist users in managing hazardous materials to minimize the risk involved in performance of various jobs?
DODINST 6050.05
Which publication promulgates policy and procedures for management of aircraft tires and tubes?
NAVAIR 04-10-506
Which publication contains information related to, and procedures for, maintaining Operating Targets (OPTARSs) and defines terms used in the resources management system pertaining to activities, ships, and squadrons?
NAVSO P-3013-1
What are listings of equipment and material that is required for performance of specific missions?
Table of Basic Allowances (TBAs)
What specifies all maintenance significant repair parts associated with the equipment and is the basis for allowances?
Allowance Parts List (APL)
How many different types of equipment lists are currently originated by Naval Supply Weapon Systems Support (NAVSUP WSS)?
3
What lists repairable assemblies, supporting repair parts, attaching parts, loose equipment, and accessories used on various aircraft?
Weapons Equipment List (WEL)
Which publication serves as a handy reference for personnel responsible for originating and processing MILSTRIP and MILSTRAP documents and contains those common definitions, coding structures, and abbreviated code definitions used on a day-to-day basic?
NAVSUP P-409
What was designed to let Supply and Maintenance personnel identify and order replacement parts for the aircraft or equipment?
Illustrated Maintenance Parts List (IPB)
Which manual is applicable to all Department of Defense (DOD) activities in the reporting, redistribution, and use of excess, surplus, and foreign excess personal property?
DOD 4160.21-M
Approximately how many line items stocked in General Services Administration (GSA) supply distribution facilities are listed in the General Services Administration (GSA) Federal Supply Catalog?
20,000
Which publication is the official naval guide for correspondence preparation?
SECNAVINST 5216.5
Which manual provides standard subject identification numbers for classifying correspondence, m numbering instructions and notices, and assigning report symbols?
SECNAV M-5210.2
Which officer is the single point of contact for maintenance activities requiring direct supply support?
Aviation Support Division (ASD)
How many sections is the Aviation Support Division (ASD) composed of?
2
How often is the Awaiting Parts (AWP) status report provided to the Intermediate Maintenance Activity (IMA)?
Daily
What is a detailed statement of an I-level repair facility’s component repair capability?
Individual Component Repair List (ICRL)
Which form must be prepared and submitted by air detachments to request material in support of helicopter maintenance from the host air capable ship?
DD 1348
What serves as the point of contact for satisfying maintenance material requirements?
Supply Response Section (SRS)
How many units is the Supply Response Section (SRS) divided into?
5
Which unit is under the functional control of the Supply Response Section (SRS) and is responsible for processing and expediting high priority requisitions?
Program Management Unit (PMU)
What is responsible for ensuring research is performed on all requisitions received that fails initial system validation?
Technical Research Unit (TRU)
Which Supply Response Section (SRS) unit is responsible for the pickup and delivery of all material to supported activities?
Material Delivery Unit (MDU)
What shortens the issue and accounting procedures for recurring issues of maintenance related materials?
Pre-expended Bin Unit (PEB)
The quantity of each item pre-expended will not exceed an estimated supply of how many days?
30
Eligible items with a unit cost of what amount or under may be routinely established in pre-expended stocks?
$150
How often at a minimum must stock records be reviewed to ensure all items have sufficient usage to be retained in a pre-expended status and to correct any mixing of pre-expended items?
Quarterly
Which section is responsible for repairables management by accounting for repairables stored in Local Repair Cycle Asset (LRCA) storage areas, in the Intermediate Maintenance Activity (IMA) repair cycle, and those being processed for shipment to Designated Rework Points (DRPs)?
Component Control
How many units is the Component Control Section (CCS) divided into?
4
Which Component Control Section (CCS) unit is responsible for maintaining control of repairable components in all phases of the repair cycle?
Document Control Unit (DCU)
What is responsible for the receipt, storage, issue, and accountability of repairable assets under the control of the Aviation Support Division (ASD)?
Local Repair Cycle Asset Storage Unit (LRCA)
Which publication contains procedures for retrograding Beyond Capability of Maintenance (BCM) repairables received from the Intermediate Maintenance Activity (IMA)?
NAVSUP P-485
The foam in place packaging technique surrounds the repairable in a container with a bed of semi-rigid foam that is applied as a liquid that expands how many times?
200
Which form must be used to document the removal of a suspected defective component from a ship or surface craft scheduled for repair at a designated Intermediate Maintenance Activity (IMA)?
OPNAV 4790/2K
Which system is the authorized means for directing accomplishment and documentation of modification or one-time inspections of equipment procured by COMNAVAIRSYSCOM?
Technical Directive (TD)
What is the Technical Directive (TD) Kit Shipment Report form number?
NAVAIR 13053/1
Which type of components represent the most significant dollar investment in the entire aeronautical item inventory?
Repairable
Which revolving fund funded by Congress finances the purchase and maintenance of stocks of common supply items required for support and operation of the Navy (expense type items)?
Navy Working Capital Fund (NWCF)
What is the primary Inventory Control Point (ICP) responsible for material support of the Naval Aviation Program with respect to technical aviation material?
Naval Supply Weapon Systems Support (NAVSUP WSS)
What are Fleet Readiness Centers (FRCs) not authorized to stock in the Navy Industrial Fund (NIF) retail store inventories?
Aviation Depot Level Repairables (AVDLRs)
Which type of items are those ordered for as specific customer job order and in the quantities required for scheduled work based on a bill of material?
Direct Material Inventory (DMI)
Which automated data processing and information system was designed to enable Fleet Readiness Center (FRC) material managers to control the flow of material to appropriate store rooms?
NAVAIR Industrial Material Management System (NIMMS)
Which program is used to permit all government furnished material requirements of each commercial contractor to be properly processed by the government Supply System through a single Supply activity regardless of which Department of Defense (DOD) Supply activity is assigned inventory control responsibility?
Single Supply Support Control Point (SSSCP)
For cost effectiveness, rework contracts are developed to provide services in yearly increments of up to how many years?
5
Which program reviews all Integrated Logistics Support (ILS) elements to determine affordable overall support solutions?
BOSS III
Logistics Engineering Change Proposals (LECPs) are funded by the Navy Working Capital Fund (NWCF) if the Return on Investment (ROI) is two to one over how many years?
10
