Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

APC 2023 > L3 - Design Economics and Cost Planning > Flashcards

L3 - Design Economics and Cost Planning Flashcards

1
Q

What is an order of cost estimate?

A
  • The determination of possible cost of a building(s) early in design stage in relation to the employer’s fundamental requirements.
  • Prior to preparation of a full set of working drawings
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is an elemental cost plan

A
  • the critical breakdown of the cost limit for the building(s) into cost targets for each element of the building(s)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What are the key design principles that affect cost? (8)

A
  • Circulation space
  • Size
  • Shape
  • Height
  • Wall to floor ratio
  • Grouping of buildings
  • Specification
  • Location
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

How does wall to floor ratio impact the cost of a building?

A

If the building has a lot of facade covering little area, the cost/m2 for the building would be high.

The cost for the high quantity + therefore cost of the facade is being divided over a small area.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

How does size impact the cost of a building?

A

A bigger building will have economies of scale, reducing the price subject to the size being designed efficiently

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

How does circulation space affect the cost of a building?

A

The “cost”/m2 in relation to net area will be higher if the “cost” is carrying surplus non-lettable circulation space.

Too little circulation space however, will make a building unattractive to a tenant reducing the rent/sales value for the client

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

How does the height of a building affect the cost?

A

A tall building may require more lift cores, reducing net space on each floor plate.

Bigger foundations, beams etc required

Requirements for better facades to deal with greater wind loads and sprinkler requirements for buildings over 30m high (approved doc B)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

How does the shape of a building affect the cost?

A

Curved shapes are expensive to manufacture + construct due to complexity

Inefficient shape could cause high wall to floor ratio

Most efficient shape is a square (excl circle because of curve)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

How does the grouping of buildings affect the cost?

A

Less facade per m2

Ability to share plant etc

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What’s a good, average and poor W:F ratio?

A

Good = 0.4

Average = 0.6

Poor = 0.8

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What percentage of a construction cost would you expect for facades?

A

15% - 25%

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What net to gross would you expect for an office?

A

Good - 80% - 83%

Excellent - 83% - 86%

Poor - over 87% or under 80%

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What government guidance document discusses school areas?

A

Building Bulletin 103: Area guidelines for mainstream schools

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What net to gross would you expect for a school?

A

70% - 75%

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What is net vs non-net for schools?

A

Non-net = WCs, personal care, circulation, kitchen, plant, internal walls

Net = everything else, incl learning, storage, halls, staff space

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What was the GIA for the school you worked on?

A

Phase 1 - 2024m2

Phase 2 - 7500m2

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

What was the net:gross?

A

72%

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

What are the full names for NRM1 and NRM2?

A

New Rules of Measurement 1: Order of cost estimating and cost planning for capital building works

New Rules of Measurement 2: Detailed measurement for building works

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

How is NRM1 structured? (4)

A

1 - Context & definitions

2 - Rules for preparing OCE, how to quantify non-measurable works

3- Rules for cost planning, how to quantify non-measurable works

4 - Tabulated rules of measurement

Appendices

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

How is NRM2 structured?

A

1 - Context & definitions

2 - Rules for preparing Bill of Quants, Schedule of Rates, how to quantify non-measurable works such as risk, contractors design works

3 - Tabulated rules of measurement

Appendices

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

What’s the difference between a cost estimate and a cost plan?

A

Cost estimate gives a likely outturn of construction costs

Cost plan is an iterative process, updated and tracked as design progresses, to control the development of the design and ensure the client achieves value

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

What is a cost model?

A

Anything that models costs, e.g. cost plan, estimate, analysis

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

What’s benchmarking and how would you benchmark a project or element?

A

The process of collecting and comparing data within an organisation or external to an organisation to identify the ‘best in class’

  1. Collect
  2. Compare
  3. Analyse
  4. Action
  5. Repeat
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

What’s the relationship between the RICS Property Measurement 2nd Edition, RICS Code of Measuring Practice 6th Edition and IPMS?

A

RICS Property Measurement 2nd Edition 2018 - This is a Professional Statement, states what we should use and when. Office and Residential = use IPMS.

Code of Measuring Practice 6th Edition 2015 = Guidance Note, how to measure GIA, NIA, GEA

IPMS - how to measure IMPS1, IMPS2, IMPS3 for offices, resi, industrial and now retail.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

Why would you not use IPMS for say retail?

A

If the client wishes you to use something else, or if the project had been measured using COP6 prior to IPMS being released.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

What is included/excluded in GIA?

A

Included:

  • Core areas
  • Area measured at ground
  • Areas taken up by IW/columns/beams
  • Stairwells, vertical projections
  • Mezz floors w/ perm access
  • Voids over stairwells
  • Structural, raked or stepped floors are to be treated as a level floor measured horizontally

Excluded

  • Perimeter wall
  • Open sided external balconies
  • Canopies
  • Voids over/under raked/stepped floors
  • Voids above GF atria
  • Greenhouses, garden stores, fuel stores (resi)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

What’s included/excluded in NIA?

A

Included
- Atria, lobbies etc that are tenant sole occupancy
- Kitchens in sole occupancy
- Built in cupboards etc in usable area
- Areas occupied by skirting/trunking
- Areas occupied by non-structural walls
subdividing accommodation in sole occupancy

Excluded
- Internal structural walls, walls enclosing
excluded areas, columns, piers, chimney
breasts, other projections, vertical ducts,
walls separating tenancies
- Common use areas (e.g. WCs, lobbies)
- Lift rooms, plant rooms, tank rooms
- The space occupied by permanent and
continuous air-conditioning, heating or
cooling apparatus, and ducting in so far as the space it occupies is rendered substantially unusable
- The space occupied by permanent,
intermittent air-conditioning, heating or
cooling apparatus protruding 0.25m or more into the usable area
- Areas with a headroom of less than 1.5m
- Areas rendered substantially unusable by
virtue of having a dimension between opposite faces of less than 0.25m
- Areas for vehicle parking

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

Define NIA

A

The usable area within a building measured to the internal face of the perimeter walls at each floor level

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

Define GIA

A

The area of a building measured to the internal face of the perimeter walls at each floor level

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

Define GEA

A

The area of a building measured externally at each floor level.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

What guidance does RICS provide on benchmarking and cost analyses?
WITHDRAWN

A

RICS Practice Standards - Cost analysis and benchmarking, 1st edition 2011

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

What is a cost analysis?

A

An examination of the distribution

of cost across the construction elements of a project

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

What’s the difference between GIA and IPMS2 office?

A
  • IPMS uses internal dominant face, GIA uses internal face (brick/block work or
    plaster coat)
  • Rooftop terraces included but stated separately
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

What’s the difference between NIA and IPMS3 office?

A
  • IPMS 3 measured to CL of walls separating two tenancies

- IPMS3 includes columns

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

What costs have you benchmarked?

A

Benchmarked cost/m2 office shell to Cat A, soft strip, academy

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

What is a standard shell to Cat A rate?

A

Circa £50-55sqft

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

What does a residential unit cost?

A

£250/sqft

£2,691/m2

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
38
Q

What’s a typical school cost?

A

Academy I worked on the benchmark was circa £2,500/m2, but would have to use “National School Delivery Cost Benchmarking” by Infrastructure & Projects authority to check

39
Q

What does the “National School Delivery Cost Benchmarking” by Infrastructure & Projects do?

A

Gives guidance on cost/m2 for schools based on pupil age, size, SEN/non SEN etc.

40
Q

How would you benchmark something if you had no historic data?

A

BCIS, Spons, market testing, build rate up using material/labour costs

41
Q

What’s the best way to benchmark costs?

A

Historic data if you have a team that deliver regular projects of similar quality and scale

42
Q

What’s the BCIS?

A

Building Cost Information Services, online

43
Q

What does BCIS do?

A

Cost and price information is collected by BCIS from across the UK construction industry, then collated, analysed, modelled, interpreted and made available to the industry to facilitate accurate cost planning.

44
Q

What ways can you manipulate the construction cost info on BCIS? (5)

A
  • Location
  • Age
  • AC/no AC
  • GIA
  • Procurement
45
Q

Give an example of the risk allowances you’ve held in an OCE

A

In an OCE I held the following risk:

Design development 10% (bc early in design process)

Construction 5% (mediocre risk associated w/ construction, similar to other projects)

Employer change 10% (client likely to change mind)

Employer other 2% (benchmarked)

46
Q

How do you measure inflation?

A

BCIS or internal TPI forecasts

47
Q

How would you quantify prelims?

A

Based on the project’s particulars:

  • Size, economies of scale
  • Complexity, cranes and scaffolding can cost more

10% - 20% typically

48
Q

What is the RIBA POW 2013?

A
  • Splits project into key project stages w/ defined outcomes
  • Shared framework for design and construction
  • Offers both a process map and a management tool.
49
Q

What does the QS do in each RIBA stage?

A

0 - ascertains clients key objectives
1 - prepares budget, order of cost estimate
2 - Cost Plan
3 - Cost Plan/PTE
4 - Cost Plan/PTE/Tender
5 - Post contract cost control, valuations, negotiates variations
6 - Negotiates final account
7 - Review/reflect, post-occupancy evaluation

50
Q

Name the stages of RIBA

A 
0 - Strategic definition 
1 - Preparation and brief
2 - Concept design
3 - Technical design
4 - Detailed design 
5 - Construction
6 - Handover and close out
7 - In use
51
Q

Why might your project deviate over the mean cost/m2?

A

Abnormals such as site logistics, demolition, asbestos

Higher specification

52
Q

How might you price things differently at different stages?

A

More detailed build-up when more detailed design becomes available. Could start with cost/m2, then move onto quantities and rates, then more detailed quants/rates.

Examples - allowance for transfer structure at Stage 1, at Stage 2 there were detailed drawings with weights

53
Q

What was the cost/m2 for a project in Reading vs London?

A

CHECK

54
Q

How did the Stage 3 costs compare to stage 2 for your office cost plan?

A

Cost had gone up, but when design development contingency dropped from 3% to 0% (end of design phase) CHECK

55
Q

What is Cat A, Cat B, Shell & Core?

A

There are no definitions for Cat A/B/S&C but generally:

Shell & Core - Bare bones - landlord/common areas complete, vertical services, no finishes to tenant areas

Cat A - Basic finish - landlord/common areas complete, vertical and horizontal services, paint to walls, possibly RAF and/or basic carpet, possibly grid to ceilings

Cat B - Finished product - partitions and doors, specialist lighting & further services, cafes, branded decor, furniture

56
Q

How can you forecast the cost for individual items such as steel?

A

TPI and CPI track cost of tenders and construction costs respectively, but should not be applied directly to an item.

To bring a historic cost for steel to present day value, you should use historic price changes for steel. Future???

57
Q

What happens to contingency as the project progresses? (4)

A

Design development - reduced as design develops

Construction risk - assessed based on construction risk, adjusted when more info is available, kept through construction phase. Any leftover = saving for client

Employer change risk - reduces as design develops and likelihood of client changing decreases. Kept during construction for any employer changes, leftover = saving

Employer other risk - kept through construction, allowance for any issues caused by client that have commercial impications

58
Q

What information would you expect from the design team at Stage 3?

A
  • Partial specification (wall types, floor types)
  • Coordinated design (architect, services, structure)
  • Developed from stage 2
59
Q

What information would you expect from the design team at Stage 2?

A
  • Agreed final project brief
  • Outlined proposals from each designer
  • Indicative weights
  • Office grid, frame and upper floors strategy
60
Q

What’s the PMI? and What does it do? What is it showing currently?

A

Construction Purchasing Managers Index

Indicated whether the construction industry is contracting or expanding

0 - 100, over 50 = expanding, under 50 = contracting

As low as 8.2 during COVID in 2020
2023 - 55, 51, 51 since February - EXPANDING

61
Q

Why do costs vary in different locations?

A
  • Availability of specialists
  • Availability of materials
  • Ease of access
  • Transport links
  • Cost of living/labour
  • Locality to materials
62
Q

Why is Brighton’s TPI higher than other areas outside of London?

A
  • Close to London and a city, similar cost of living
  • Big labour market
  • Similar accessibility
  • Higher city living costs
63
Q

What are some abnormals you’ve had on your projects?

A
  • Asbestos removal
  • Demolition of existing buildings
  • Feature facades
64
Q

Do you have any other examples of advising on design economics and cost planning?

A
  • Canada Water Stage 1 Cinema Portion vs Cinema Standalone estimate
  • Costs in standalone estimate had gone up, particularly in frame
  • Because previously it was a cost/m2, difficult to line up and compare apples for apples
  • Had to explain that shared/party walls should be apportioned to give like for like comparison.
65
Q

When calculating inflation for a project in the future, what date do you work it to?

A

Present day to mid-point of construction

66
Q

What would you expect to have a better W:F, resi or school?

A

Resi because of slab - slab height generally smaller

67
Q

What was your position on inflation for your academy?

A

Excluded - client instruction.

68
Q

What are WTO tariffs?

A

Vary depending on product, 3% - 15%. Carpet is 12 or 15.. would have to check wto.org for each item

69
Q

What is TPI for 2024?

A

BCIS - 12 months from now 2.6% YoY

70
Q

What were components of construction inflation last year?

A

G&T tender info suggested rebar ~12%, fabricated steel up 4%

71
Q

What was the cost/sqft of the project in South London?

A

Mixed use, including all on costs + inflation, just shy of £300/sqft

Commercial w/ on-costs pre inflation - £290/sqft

Retail w/ on-costs pre inflation - £179/sqft

Cinema w/ on-costs per inflation - £185/sqft

72
Q

Where might you find definitions for shell & core/cat A/cat B?

A

BCO produce a guide book on them

73
Q

What does BCO stand for?

A

British Council for Offices

74
Q

Where are PSUMS defined?

A

NRM2

75
Q

What are the different types of PSUM?

A

Defined

Undefined

76
Q

What is a PSUM?

A

A sum of money set aside to carry out work that cannot be described and given in quantified items in accordance with the tabulated rules of measurement

77
Q

What is an undefined PSUM?

A

A sum provided for work that is not completely designed, but for which the information required for a defined provisional sum cannot be provided

78
Q

What is a defined PSUM?

A

A sum provided for work which is not completely designed but for which the following information shall be provided:
– the nature and construction of the work;
– a statement of how and where the work is fixed to the building and what other work is to be fixed thereto;
– a quantity or quantities that indicate the scope and extent of the work; and
– any specific limitations and the like identified

79
Q

What is the TPI for London vs Reading vs Brighton?

A 
London is highest, expensive labour market due to high cost of living.
125 - City of London
109 - Brighton
107 - Reading
Bedford = 100
Cambridge = 102
80
Q

Where did you find regional TPI data?

A

We have internal TPI info for regions

BCIS also provide indices (Tender Price Studies)

81
Q

What elements would you include in a cost plan for a CAT A fit-out?

A
  • Internal finishes
  • FF&E
  • Services
82
Q

How do you measure inflation?

A
  • Understand TPI today and TPI forecast for mid-point of construction
  • Work out the %age uplift for mid-point of construction from present day
  • Apply that same %age to cost estimate
83
Q

What information did you require to carry out a cost estimate for your London office fit-out project?

A

a. Type of building (function)
b. New build or extension
c. Location
d. Size
e. Indication of quality
f. Site visit

84
Q

In your documents you say the project would be 22% higher in 8 years time, the project stating in years or completing in 8 years? is this relative to inflation?

A

Inflation was taken from present day (present day pricing) to the mid-point of each phase

Overall 22% higher

Each phase had it’s seperate inflation uplift

85
Q

How might you forecast long term TPI?

A

Long term averages by looking historically. Over the last 50 years I believe the average is 4% a year

86
Q

What other materials might you use for piles?

A
  • Concrete
  • Steel (sheet piles)
  • Timber
87
Q

What might you exclude from a Cost Plan?

A
  • VAT
  • Professional fees
  • Asbestos, lead paint
88
Q

Where did you allow for the PCSA fee in your cost plan?

A

Professional fees budget, not managed by me

89
Q

When is a Principal Contrator (CDM) required?

A

PC required post-contract. If two or more contractors on site at the same time, PC must be appointed to manage those shared accesses/hoarding etc

90
Q

Can BCIS offer costs for materials/items?

A

Materials indices

91
Q

What’s the cost of your resi units, say a 2-bed?

A

[insert your experience]

92
Q

What is the gross costs for the functions in your project?

A

[insert your experience]

93
Q

What’s the cost/sqm on your project at Stage 1 vs Stage 2?

A

[insert your experience]

APC 2023 (24 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions