DB 19-12 Extractor. Flashcards
To reduce the possibility of contamination and thoroughly remove products of combustion, the LAFD has installed industrial ___ and implemented the “____” to clean PPE.
1) extractor-washer machines (Extractors)
2) “Post Structure Fire Decontamination Procedures”
- Training Bulletin No. 175
PPE serves as a barrier, however, if not properly cleaned and decontaminated, it can be a source of continuous exposure to firefighters by inadvertently spreading toxins into the fire station and the home which is termed ___ exposure
second-hand
This detailed approach to PPE cleaning is a first line of ___ to reduce contamination and second-hand exposures.
defense
The “____” cleaning and inspection cycle is critical not only to extend the life of PPE, but, more importantly, to ensure that it maintains the appropriate level of protection according to the manufacturers’ requirements.
“advanced”
- extend the life of PPE
- maintains the appropriate level of protection according to the manufacturers’ requirements.
The ___ shall establish the advanced cleaning and inspection cycle for the LAFD to ensure that PPE is properly cleaned, inspected, and repaired on a routine basis.
Supply and Maintenance Division
This advanced cleaning, conducted by the LAFD’s certified ___ via pre-scheduled pick up not only launders to remove the toxic fireground contaminants, but also ensures that all layers of PPE have been inspected and repaired according to the manufacturers’ requirements.
Independent Service Provider
-pre-scheduled pick up
As directed by the ___, PPE shall be cleaned after exposure to contaminants from structural and/or brush firefighting, automobile and/or rubbish fires, and exposures from any type of hazardous materials incident.
Incident Commander
The following listed PPE shall be laundered in Extractors:
Turnout coat and pant outer and inner shell Brush jackets Brush shirts Brush pants Firefighting hoods
Regardless of exposure to contaminants at a working structure fire, PPE shall also be cleaned in an Extractor a minimum of ___ a year and may be cleaned more frequently if deemed necessary.
twice
Brush pants, brush shirts, and firefighting hoods shall be cleaned ___.
as needed.
___ shall establish cleaning schedules for their respective Battalions.
Battalion Commanders
Schedules established for each Battalion shall be consistent among ___.
all three platoons.
Considerations when establishing a cleaning schedule are dates of ___ and ___.
Battalion/Annual Inspections and advanced cleaning and inspection.
___ are to develop an annual schedule and track progress to ensure compliance.
Battalion Commanders
Task Force Stations may utilize the Engine Company or Light Force to launder that fire station’s PPE. The __th person at designated Task Forces should be avoided for PPE cleaning details.
10th
Single ___ shall be provided coverage with an Engine Company from their Battalion to allow the single Engine to launder their PPE
Engine Companies
___ shall be provided a detail arranged through the respective Battalion.
Specialized Companies
Crash, Boat, Air Operations, etc.
Any member who desires to launder their PPE off duty at a station may do so with the permission of the ___ at the location housing the equipment.
on-duty Station Commander
Companies leaving their district to launder PPE shall obtain approval from ___ prior to leaving their district. Company status while washing PPE shall be “CAV” with the permission of MFC.
Metropolitan Fire Communications (MFC)
Companies laundering PPE shall monitor their designated MFC dispatch channel. Companies are strongly encouraged to launder PPE in the ___ hours due to daytime activities
evening
Preparation of PPE Liners and Shells:
Don __ Gloves
EMS
Preparation of PPE Liners and Shells:
Inner Liners - Detach liner from outer shells. Only inner liners shall be washed ___.
together
Preparation of PPE Liners and Shells:
Outer Shells - Fasten hooks or other metal parts and turn the shells ___ to avoid damage to the Extractor drum. Only turnout shells shall be washed together.
inside out
Preparation of PPE Liners and Shells:
Fasten all hook and loop (Velcro) closures to each other to reduce the likelihood of damage to ___ parts of the PPE.
delicate
Preparation of PPE Liners and Shells:
Note: Inner Liners and Outer Shells shall be washed ___ to avoid cross contamination.
separately
Washing Procedures:
Turnout Coat Shells: Maximum __ per load
4
Washing Procedures:
Turnout Pant Shells: Maximum __ per load.
4
Washing Procedures:
Turnout Coat Liners: Maximum __ per load.
4
Washing Procedures:
Turnout Pant Liners: Maximum __ per load.
4
Washing Procedures:
Brush Jackets: Maximum __ per load.
6
Washing Procedures:
Brush Pants: Maximum __ per load.
6
Washing Procedures:
Add __ cup of Extractor Laundry Detergent (ONLY) to detergent cup number 1.
1
-(ONLY) to detergent cup number 1
Washing Procedures:
NO ___ OR BLEACH TYPE PRODUCTS SHALL BE USED. THESE PRODUCTS WILL DEGRADE THE ___ BARRIER OF THE PPE
1) BLEACH
2) PROTECTIVE
Washing Procedures:
Heavily soiled turnouts and brush gear: Use Cycle 6, cotton-terrycloth, heavy soil. Wash duration approximately __ minutes.
38 minutes
Washing Procedures:
Lightly soiled turnouts and brush gear: Use Cycle 2, cotton-terrycloth, light soil. Wash duration approximately __ minutes.
23 minutes
Washing Procedures:
Members handling PPE clothing shall thoroughly wash their hands after the ___.
washing procedure
Drying Procedure:
Remove garments from Extractor and ensure that they are turned ___ for proper drying.
inside out
Drying Procedure:
Dry by hanging in a ___, well-ventilated area.
shaded
-well-ventilated area
Drying Procedure:
Do not hang garment in direct or indirect sunlight. ___ will severely reduce the strength of seams, cause discoloration, and greatly reduce the strength and protective qualities of the textiles.
Ultraviolet light
UV rays
Maintenance Extractor:
Fire stations housing an Extractor are responsible for insuring all ___ is completed
maintenance
Maintenance Extractor:
Basic maintenance instructions are provided in the ___.
manufacturers’ instruction manual
Maintenance Extractor:
Extractor mounting frames, rails, and bolt downs shall be visually inspected ___ for breaks, cracks, and loose bolts.
periodically
Maintenance Extractor:
Improper or loosely mounted machines may be prone to ___ during the spin cycle which can render the machine inoperable.
internal damage
Maintenance Extractor:
The practice of washing any other garments in Department Extractors (specifically Rescue Ambulance towels) is strictly ___.
prohibited
-specifically Rescue Ambulance towels
Maintenance Extractor:
___ and other items cause internal damage which will eventually render the machines inoperable and unavailable for their intended use. Therefore, members shall not use Extractors for washing any other items except PPE.
Fragments from towels
Maintenance Extractor:
Requests for equipment repair shall be submitted to the ___.
Building Administration/Fire Facilities Section.
Laundry Supplies:
Fire stations with Department issued washers will be authorized to requisition Extractor Laundry Detergent through the normal ___.
supply requisition process.
Laundry Supplies:
In compliance with the “___” initiatives, proper and routine laundering of PPE will reduce our members’ exposure to hazardous substances through the wearing of contaminated clothing and will extend the life of personal protective equipment.
“Everyone Goes Home”
Any questions regarding the laundering of PPE shall be directed to the ___.
Risk Management Section at (213) 482-6933.