DB 06-12 Backing Policy Flashcards
When was a new heavy apparatus backing policy and procedures outlined and disseminated in a special notice?
June 23, 2005
The most significant difference in the new backing policy was the change that prohibits members from riding what or any exposed position when the vehicles in motion?
Tailboard
The what was repositioned as a safety spotter off the apparatus to provide for safety from a ground level position?
“Tailboard safety member”
To ensure the highest level of member safety, who solicited field input to address problems with the new backing procedures in order to develop safe and manageable backing policy?
Bureau of emergency services
Although safety devices/equipment may provide a degree of added safety when riding the tailboard, they cannot assure an adequate safety margin in the event of a what and therefore considerations of this proposal was eliminated?
Fall
The backing policy is consistent and complied with who’s recommendations?
NFPA and NIOSH
The intention of the policy’s to allow who to secure traffic, survey behind the apparatus and the intended path of travel, and then observe the backing operation from a safe location?
Company members
DB 06-12 supersedes the special notice for backing date what and titles “revised LAFD heavy apparatus backing policy”?
June 23, 2005
Avoid what operations with heavy apparatus whenever possible?
Backing
No member shall be permitted to what on the tailboard, running board, or any exposed position of the apparatus when the vehicle is in motion?
Ride
A safety officer normally who shall directly supervise and ensure safety of all backing operations?
Company commander
Before backing, how many members shall survey the read of the apparatus path of travel by walking around the apparatus to assure the path is clear and safety hazards, this information shall be communicated to the driver before operations begin?
1 member
No member shall enter the designated apparatus hazard zone, delineated by an area of how many feet behind the apparatus and how many feet on each side of the apparatus while moving backwards?
15 feet behind, 3 feet on each side
1 member is to be designated as the what and shall be safely positioned outside the apparatus hazard zone to monitor the travel path of the apparatus normally the opposite side of the safety officer?
Safety spotter
In lieu of the 3 bell signal to begin backing, the driver shall remove the headset and listen for instructions and the “all clear” from who?
The safety officer