CH26 / COMMUNICATIONS Flashcards
What does QDR mean?
Magnetic bearing from the station
If you are requested to report your height, to which Q-code-setting would you refer?
QFE
Which Q-code is used to report altitude?
QNH
What does ATIS mean?
Automatic Traffic Information Service
What is the Q-code for “magnetic heading to the station (no wind)”?
QDM
What does CTR mean?
CONTROL ZONE
What Is the Q-code for “true bearing from the station”?
QTE
What is the Q-code for “magnetic bearing from the station”?
QDR
QNH is the Q-code to indicate:
The altimeter sub-scale setting to obtain elevation when on the ground.
What does QDL mean?
I intend to ask you for a series of bearings.
What does QNE mean?
What indication will my altimeter give on landing at … (place) at … hours, my sub-scale being set to 1013.2 millibars (29.92 inches)?
A radio direction finding station will use the following Q code to pass a true heading (no wind) to an aircraft to head for that station:
QUJ
The order of priority of the following messages in the aeronautical mobile service is:
Distress message, urgency message, direction finding message
What Is the correct way of transmitting the number 3500 when indicating an altitude or an height?
Three thousand five hundred
During the transmission of numbers containing a decimal point:
The term Decimal must always be transmitted
The time is 9:20 A.M. What is the correct way of transmitting this time if there is no possibility of confusion about the hour?
Two zero
Which phrase shall be used If you want to say: AN ERROR HAS BEEN MADE IN THIS TRANSMISSION {or message Indicated). THE CORRECT VERSION IS:
QNH 1017, correction QNH 1016
A message preceded by the phrase TRANSMITTING BLIND DUE RECEIVER FAILURE shall be transmitted:
On the frequency presently in use
Which phraseology Is to be used to ask the control tower for permission to taxi on a runway in the direction opposite to that In use?
“Request back track on runway”
Which phrase shall be used If you want to say:” Yes”:
Affirm
The phrase used by ATC to instruct you to listen out on a frequency is:
MONITOR
What is the radiotelephony call sign for the aeronautical station providing surface movement control of aircraft on the manoeuvring area:
GROUND
What is the radiotelephony call sign for the aeronautical station providing approach control radar departures:
DEPARTURE