Book 3 Unit 8 Flashcards
The symbol below is used in P&ID diagrams to indicate a:
A) Plug valve
B) Globe valve
C) Gate valve
D) Check valve
D) Check valve
The Piping & Instrumentation Diagram (P&ID):
A) Detailed maintenance task procedure for the process equipment
B) Equipment details such as vessel sizes
C) Detailed job instructions of the process equipment
D) A “Field Level Hazard Assessment” component
B) Equipment details such as vessel sizes
Types of maintenance is classified in the following categories:
A) Routine, Preventative, Projects, and Emergency
B) Procurement, Inventory, Estimated, and Planned
C) Completion, Projection, Extension, and Considerations
D) Notification, Submission, Review, and Approval
A) Routine, Preventative, Projects, and Emergency
An electrical diagram will show:
A) The basic power flow to each item
B) The number and size of wires required
C) The exact location of each item in a building
D) The type of load at each item
A) The basic power flow to each item
Two-Way Radios are used when:
A) Communicating in long distance
B) Private conversation is important
C) In an emergency situation
D) Repeater(s) are installed
C) In an emergency situation
One of the acceptable practices of single line sketches:
A) Included as part of the trainee competent qualification sign-off requirements
B) Used instead of the P&IDs and PFDs
C) Hand written notes are used instead of Standard Operating Procedure (SOP)
D) Used as the official verification process for P&IDs and PFDs
A) Included as part of the trainee competent qualification sign-off requirements
If your plant maintenance department neglects oil changes, filter replacement, and bearing lubrication, your plant will eventually need more unscheduled _______________ maintenance.
A) Emergency
B) Preventative
C) Project
D) Routine
A) Emergency
The P&ID includes:
A) Equipment details such as vessel sizes
B) Detailed maintenance task procedure for the process equipment
C) A “Field Level Hazard Assessment” component
D) Detailed job instructions of the process equipment
A) Equipment details such as vessel sizes
The Process Flow Diagram (PFD) is:
A) The equipment shown in the process are in exact orientation
B) A detailed drawing of a plant
C) The components drawn are not to scale
D) A simplified schematic of a portion of the equipment in the process
C) The components drawn are not to scale
One of the best practices for writing SOPs is to:
A) To maintain accurate contact information of service providers
B) To ensure compliance with government regulations
C) To collect budgeting information for future reference
D) Eliminates to the needs for safe work permits
B) To ensure compliance with government regulations
Single line sketches are used for:
A) Official plant process flow diagram and P&ID
B) Learning purposes completed with personalized written notes
C) Detailed plant process flow including equipment
D) Official job instructions
B) Learning purposes completed with personalized written notes
Which of these is a key component to MMS (maintenance management system)?
A) Well-stocked toolboxes
B) A maintenance manager
C) On call contractors
D) Work order system
D) Work order system
Which form of communication is preferred in the workplace?
A) Radio
B) Verbal
C) Personal
D) Written
D) Written
One of the commonly accepted document control best practices is to:
A) Store controlled documents in multiple locations
B) Securely stored documents in the personal drive of the designated document control officer
C) Keep outdated documents for future reference
D) Have limited circulation of printed copies
D) Have limited circulation of printed copies
Who would be one of the most important reviewers of a new SOP?
A) An operator from that area
B) The HR manager
C) The Author
D) The Chief Power engineer
A) An operator from that area
The symbol below is used in P&ID diagrams to indicate a:
A) Plug valve
B) Gate valve
C) Globe valve
D) Check valve
A) Plug valve
