Book 3 Unit 1 Flashcards
Clear definitions for terms and equipment relating to refrigeration and air conditioning equipment are defined in the ___________.
A) NFPA 1001
B) ASME Section VII
C) ASME Section I
D) CSA B52
E) CSA B51
D) CSA B52
In general, all Acts will have the all of the following in common except:
A) A listing of the Codes and standards that have not been adopted for use
B) The requirement for, and the methods of, inspecting, testing and certifying qualified repair and supervisory personnel will be clearly set out by the Act
C) The scope of the Act
D) The designation of a Director or Administrator and a description of their various responsibilities
E) The purpose of the Act will always be included
A) A listing of the Codes and standards that have not been adopted for use
It is much easier to have changes made to a regulation than it is to have changes made to a/an:
A) Edict
B) Proclamation
C) Act
D) Bill
E) Regulation
C) Act
Which of these is the “Mechanical Refrigeration Code”?
A) CSA B52
B) ASME Section I
C) CSA B51
D) ASME Section VII
E) NFPA
A) CSA B52
This group decides the content of the various courses and the criteria required to ensure a Power Engineer is properly qualified when a Certificate of Competency is issued.
A) ANSI
B) ACI
C) SOPEEC
D) IPECC
E) ASME
D) IPECC
What ASME code contains Recommended Guidelines For The Care of Power Boilers?
A) CSA B51
B) ASME Section VII
C) NFPA 1001
D) CSA B52
E) ASME Section I
B) ASME Section VII
It is much easier to have changes made to a ________ than it is to have changes made to an Act.
A) Proclamation
B) Act
C) Edict
D) Bill
E) Regulation
E) Regulation
What determines the classification of the certificate of competency required for the role of chief power engineer?
A) ASME regulations
B) Kilowatt rating of the power plant
C) Type of feedstock used
D) Number of employees
E) Product classification
B) Kilowatt rating of the power plant
What are the two main purposes of the CSA B-52 code?
1. Terms and equipment relating to refrigeration and air conditioning equipment are defined
2. The various classifications of buildings and occupancies are listed and described with examples of each classification given
3. To provide for the safe design, construction, installation, operation and repair of refrigerating and air conditioning equipment and systems, and related equipment
4. To promote uniform requirements among the provinces
A) 1,4
B) 3,4
C) 2,4
D) 1,3
E) 1,2
B) 3,4
One of the national legislative items which each jurisdiction in Canada has adopted as part of their applicable Act and/or Regulations is the:
A) ASME Codes
B) ANSI Codes
C) CSA B52
D) NFPA Codes
E) NAFTA Codes
C) CSA B52
Which code regulates power boilers used in locomotive service?
A) ASME B31.1
B) ASME Section VII
C) CSA B51
D) ASME Section I
E) CSA B52
D) ASME Section I
What code contains Rules For Construction of low-pressure hot water supply boilers?
A) ASME Section VII
B) NFPA
C) ASME Section IV
D) CSA B51
E) CSA B52
C) ASME Section IV
The Act has _________ which are pursuant to the enforcement of the Act.
A) Edicts
B) Laws
C) Regulations
D) Bills
E) Proclamations
C) Regulations
The main or primary document which must be passed through the jurisdictional parliament is a/an:
A) Regulation
B) Act
C) Edict
D) Bill
E) Proclamation
B) Act
This group of members of jurisdictional bodies meets at least annually answering to the ACI they ensure that all Power Engineer examinations meet the requirements set by the jurisdictional legislative bodies.
A) ANSI
B) ACI
C) SOPEEC
D) IPECC
E) ASME
C) SOPEEC
