32 Walking Working Surfaces Standard Flashcards
Walking Working Surfaces Standard
On (M)(D)(Y) the Occupational Health and Safety Administration (OSHA) issued a final rule revising its walking working surfaces and personal protection equipment (PPE) regulations.
November 18, 2016
Page 40
Walking Working Surfaces Standard
Who issued a final rule revising its walking working surfaces and personal protection equipment (PPE) regulations.
Occupational Health and Safety Administration
(OSHA)
Page 40
Walking Working Surfaces Standard
Who did not exempt motor vehicles from the fall protection requirements but did not propose any specific fall protection requirements for motor vehicles.
OSHA
Page 40
Walking Working Surfaces Standard
OSHA make revision to the following areas;
- __________
- ____ _____ _____
- _____ _______
- ____ ____ ____ & ____ _____
- ____ ______ _______
- Dockboards
- Repairs/ Assembly Pits
- Wheel Chocking
- Loading Docks/ Guardrails & Fall Protection
- Employer Training Requirements
Book page 40
Walking Working Surfaces Standard
The final rule defines a ______ as a portable or fixed device used to span a gap or compensate for a difference in height between a loading platform and a transport vehicle.
dockboard
Book page 40
Walking Working Surfaces Standard
_______ may be powered or manual, and include, but are not limited to, bridge plates, dock levelers, and dock plates.
Dockboards
Book page 40
Walking Working Surfaces Standard
__-__ protection is not required when there is insufficient space for equipment to run off
Run-off
Book page 40
Walking Working Surfaces Standard
Securing ____ ____ is not necessary when there is sufficient contact between the dock board and the surface to prevent the dock board from moving out of a safe position
dock boards
Book page 40
Walking Working Surfaces Standard
Repairs/ Assembly Pits: In situation where there are two or more pits (not more than 10 feet deep) in common area and are not more than ___ feet apart, OSHA requires contrasting floor makings at least six feet from the pit edge around the entire area of the pits
15
Book page 40
Walking Working Surfaces Standard
Repairs/ Assembly Pits: In situation where there are two or more pits (not more than 10 feet deep) in common area and are not more than 15 feet apart, OSHA requires contrasting floor makings at least ___ feet from the pit edge around the entire area of the pits
six
Book page 40
Walking Working Surfaces Standard
The final rule clarified OSHA’s authority to enforce wheel chocking requirement in two instances: (1) Tansport vehicles that do not meet the definition of_____ ____ ____ (2) CMVs not operated in interstate commerce, which includes CMVs that transport materials on private roads or within a work establishment
commercial motor vehicle (CMV)
Book page 40
Walking Working Surfaces Standard
The final rule clarified OSHA’s authority to enforce wheel chocking requirement in two instances: (1) Tansport vehicles that do not meet the definition of commercial motor vehicle (CMV)(2) CMVs not operated in interstate commerce, which includes CMVs that transport materials on ____ _____ or within a work establishment
private roads
Book page 40
Walking Working Surfaces Standard
The final rule does not exempt loading docks from having guardrails or ____ _____
fall protection
Book page 40
Walking Working Surfaces Standard
The final rule requires that all employers must provide training for each employee by a ____ _____
qualified person
Book page 41
