(2) SAFE PRACTICES FOR WELDING INSPECTORS Flashcards
Q2-1
The welding inspector is exposed to which of the following safety hazards:
a. radiation
b. falling objects
c. electrical shock
d. eye hazards
e. all of the above
Q2-1
The welding inspector is exposed to which of the following safety hazards:
E. all of the above
a. radiation
b. falling objects
c. electrical shock
d. eye hazards
Q2-2
A document which covers safety in welding and cutting is:
a. AWS D1.1
b. API 1104
c. ANSI Z49.1
d. ASME Section VIII
e. ASME B31.3
Q2-2
A document which covers safety in welding and cutting is:
c. ANSI Z49.1
Q2-3
The most important component of an effective safety and health program is:
a. safety rules
b. safety procedures
c. protective equipment
d. welding helmet
e. management support
Q2-3
The most important component of an effective safety and health program is:
e. management support
Q2-4
Safety training is mandated under provisions of:
a. AWS “Safe Practices”
b. OSHA
c. ASME Code
d. Welding Handbook, Volume 2
e. none of the above
Q2-4
Safety training is mandated under provisions of:
b. OSHA
Q2-5
The abbreviation ‘MSDS’ means:
a. Management Support and Daily Safety
b. Material Strength and Discontinuity Sheet
c. Material Safety Data Sheet
d. Material Strength and Data Sheet
e. none of the above
Q2-5
The abbreviation ‘MSDS’ means:
c. Material Safety Data Sheet
Q2-6
The abbreviation ‘TLV’ means:
a. Total Linear volume
b. Threshold Limit Value
c. Tack Length Value
d. Threshold Limiting Valve
e. none of the above
Q2-6
The abbreviation ‘TLV’ means:
b. Threshold Limit Value
Q2-7
Employers must make all applicable MSDS data available to their employees.
a. true
b. false
Q2-7
Employers must make all applicable MSDS data available to their employees.
a. true
Q2-8
Personnel must be trained to recognize safety hazards.
a. true
b. false
Q2-8
Personnel must be trained to recognize safety hazards.
a. true
Q2-9
A ‘Hot Work Permit’ is required for:
a. all welding operations
b. all cutting operations
c. all preheating operations
d. areas where a fire hazard may occur during a welding, cutting, or preheating operation
e. all of the above
Q2-9
A ‘Hot Work Permit’ is required for:
d. areas where a fire hazard may occur during a welding, cutting, or preheating operation
Q2-10
Eye hazards found in welding operations include:
a. flying particles
b. radiation
c. smoke and fumes
d. all of the above
Q2-10
Eye hazards found in welding operations include:
D. all of the above
a. flying particles
b. radiation
c. smoke and fumes
Q2-11
Protective equipment not suitable for eye protection from welding radiation includes:
a. welding helmets with filter plates
b. clear safety goggles
c. safety goggles with filter plates
d. protective screens
e. properly positioned barricades
Q2-11
Protective equipment not suitable for eye protection from welding radiation includes:
b. clear safety goggles
Q2-12
Suitable clothing materials for welding and cutting are:
a. 65% cotton, 35% polyester
b. wool
c. chemically treated cotton
d. b and c above
e. none of the above
Q2-12
Suitable clothing materials for welding and cutting are:
D. b and c above
b. wool
c. chemically treated cotton
Q2-13
Before working on equipment where machinery guards have been removed, a ‘Lock, Tag, and Try’ procedure should be completed.
a. true
b. false
Q2-13
Before working on equipment where machinery guards have been removed, a ‘Lock, Tag, and Try’ procedure should be completed.
a. true
Q2-14
In avoiding fumes during welding, the most important factor is:
a. the type of base metal
b. the type of filler metal
c. the type of welding process
d. the position of the welding machine
e. the position of the welder’s head
Q2-14
In avoiding fumes during welding, the most important factor is:
e. the position of the welder’s head
Q2-15
It is not important to consider ventilation during welding and cutting operations.
a. true
b. false
Q2-15
It is not important to consider ventilation during welding and cutting operations.
b. false