(1) WELDING INSPECTION and CERTIFICATION Flashcards
Q1-1
Why is there an increasing need for weld quality?
a. safety
b. economics
c. less conservative design
d. government regulations
e. all of the above
Q1-1
Why is there an increasing need for weld quality?
E. all of the above
a. safety
b. economics
c. less conservative design
d. government regulations
Q1-2
What AWS document describes the rules for the CWI certification program?
a. AWS 5.5
b. AWS D1.1
c. AWS QC1
d. AWS 5.1
e. AWS 14.1
Q1-2
What AWS document describes the rules for the CWI certification program?
c. AWS QC1
Q1-3
Weld quality control should begin after welding has been initiated.
a. true
b. false
Q1-3
Weld quality control should begin after welding has been initiated.
b. false
Q1-4
What are the three welding inspector certifications covered in AWS QC1?
a. CAWI, CWI, BWI
b. CWI, CAWI, SCWI
c. SCWI, CWI, ACWI
d. Levels I, II, and III
e. None of the above
Q1-4
What are the three welding inspector certifications covered in AWS QC1?
b. CWI, CAWI, SCWI
Q1-5
What is generally considered to be the most important quality of a welding inspector?
a. graduation from a welding vocational program
b. an engineering degree
c. an associates’ degree
d. professional attitude
e. hold a certified welder certificate
Q1-5
What is generally considered to be the most important quality of a welding inspector?
d. professional attitude
Q1-6
The vision requirements for a CWI are near vision acuity on:
a. Jaeger J1 at not less than 24 in
b. Jaeger J2 at not less than 12 in
c. Jaeger J2 at not less than 12 in, with or without corrective lenses
d. the inspector cannot wear glasses
e. 20/20 vision
Q1-6
The vision requirements for a CWI are near vision acuity on:
c. Jaeger J2 at not less than 12 in, with or without corrective lenses
Q1-7
The acronym KASH stands for:
a. knowledge, attitude, skills, and habits
b. knowledge, application, skills, and habits
c. knowledge, attitude, skills, and honesty
d. knowledge, application, skills, and honesty
e. knowledge, attitude, sincerity, and honesty
Q1-7
The acronym KASH stands for:
a. knowledge, attitude, skills, and habits
Q1-8
The welding inspector should have a basic understanding of:
a. welding processes
b. nondestructive testing methods
c. a and b above
d. codes and standards
e. all of the above
Q1-8
The welding inspector should have a basic understanding of:
E. all of the above
a. welding processes
b. nondestructive testing methods
c. a and b above
d. codes and standards
Q1-9
The term used to describe a delay in the production schedule to permit inspection is:
a. NDE
b. hold point
c. preinspection
d. reference point
e. arc strike
Q1-9
The term used to describe a delay in the production schedule to permit inspection is:
b. hold point
Q1-10
Inspection report corrections should be made by:
a. rewriting the entire report
b. reporting the correction to the welding foreman
c. telling the welder what was done
d. ignoring the original error
e. single-line out the error, correct the error, date, and initial
Q1-10
Inspection report corrections should be made by:
e. single-line out the error, correct the error, date, and initial
Q1-11
A definition of ethics is:
a. using common sense and honesty
b. living by the rules
c. being fair and impartial
d. basing decisions on facts
e. all of the above
Q1-11
A definition of ethics is:
E. all of the above
a. using common sense and honesty
b. living by the rules
c. being fair and impartial
d. basing decisions on facts
Q1-12
For communications to be effective, it should form a “continuous loop.”
a. true
b. false
Q1-12
For communications to be effective, it should form a “continuous loop.”
a. true
Q1-13
The welding inspector must often communicate with:
a. welders
b. supervisors
c. welding engineers
d. members of management
e. all of the above
Q1-13
The welding inspector must often communicate with:
E. all of the above
a. welders
b. supervisors
c. welding engineers
d. members of management
Q1-14
NDE personnel (other than CWIs) are typically certified to what document?
a. AWS QC1
b. AWS D1.1
c. API 1104
d. ASNT SNT-TC-1A
e. certification is not needed
Q1-14
NDE personnel (other than CWIs) are typically certified to what document?
d. ASNT SNT-TC-1A
Q1-15
You must have a high school diploma to become a CWI.
a. true
b. false
Q1-15
You must have a high school diploma to become a CWI.
b. false
