Warning Systems Flashcards
If the upper ECAM Display Unit fails
E/WD data automatically transfers to the SD
If the lower ECAM Display Unit fails,
SD data can be displayed on upper ECAM by pushing and holding any SYS button.
What aural warning sounds when the MASTER CAUTION light illuminates during a level 2 ECAM
A single chime
A continuous repetitive chime, synthetic voice, or specific sound indicate a
Level 3 ECAM
BLUE COLORED TEXT on the ECAM memo section signifies
Actions to be carried out
Red colored text on the ECAM memo section signifies
Immediate action required
A cavalry charge aural signal indicates
Auto Pilot Disconnect
A triple click aural sound indicates
Landing capability change
What does the green arrow on the memo section of the E/WD indicate?
More than one page of alert messages is available for display on the E/WD
The NW STRG DISC memo changes from green to amber after
First engine start
T.O. INHIBIT is active
From takeoff power application to 1500 feet AGL, or for two minutes after takeoff
What is the function of the T.O. INHIBIT
Inhibits unnecessary distractions during takeoff
The T.O. INHIBIT DOES NOT inhibit which of the following?
F/CTL L(R) SIDESTICK FAULT
LDG INHIBIT is active
from 800 feet AGL to 80 knots.
What does pushing the T.O. CONFIG button on the ECAM control panel do?
Simulates takeoff power application.
The T.O. CONFIG button checks all of the following except
Cabin pressure low differential pressure
How can a cleared ECAM be recalled
Pressing the RCL button
How can an ECAM STATUS page be displayed
Manually by pushing the STS button
What happens when the EMER CANC button is pushed with a Level 3 ECAM Warning?
Present aural warning and MSTR WARN light is cancelled
