Systems 2 Flashcards
The AOA computer receives input from a potentiometer driven through a belt and pulley system from what component?
AOA vane
Direct tuning of radio frequencies on the RMU is accomplished by ______ then turning the data entry knobs
Transfer key (for 3 seconds)
For proper operation of the EHSI during ILS approaches ____ must be selected as the navigation source on the EFIS control panel
VOR
In the event of the primary aircraft electrical system failure backup indications for electronic instruments are _____
provided by the standbys and powered by the AUX BAT
The VHF navigation receiver processes what types of signal?
VOR & ILS
In the T-6 both pilots have the capability to navigate via what types of equipment and which types of approaches (VHF nav)
VOR
VOR and ILS approaches (NOT GPS for this question, GPS approaches are possible)
The normally closed _____ when the pressurization system opens to relieve cockpit over pressurization when it receives a signal from the ∆p regulator
Safety outflow valve
With the DEFOG switch ON a higher volume of air is passed the heating system ____
Heating system ejector
The purpose of the ejection seat harness system is to secure the pilot to the ejection seat with a combination of what?
- Torso harness
- Lap belt
- Leg restraints
During ejection what goes up initially?
The seat and manifold assembly, followed by rocket motors when reaching the top of the ejection seat rails
When are the leg restrains activated during ejection?
As the seat moves up the rails
If the red flag is shown on the standby attitude indicator it indicates that no ___ is being supplied to the instrument?
Electrical power
When looking at a RMU what things might indicate a problem with it when you are still seing text?
Dashes or OFF
With the front vent control lever set to foot a control valve in each cockpit is set to divert the airflow to the ____ below the instrument panel?
Footwarmers
