SM 600 ✅

Question 1

What should be assigned to all tools & equipment with an internal combustion engine?

Answer 1

A brass tag number.
602.04

Question 2

Company markings should be how far from the male hose coupling?

Answer 2

15 inches. 602.20

Question 3

Repair, replacement & adjustment of a major nature or requiring knowledge not normally available is known as?

Answer 3

Shop level maintenance. 604.06

Question 4

What day of the week shall operators inspect the underside of heavy duty division vehicles?

Answer 4

Monday. 604.15

Question 5

What are the oil change intervals for diesel & gas vehicles?

Answer 5

Diesel = 100 hours
Gas = 4,000 miles.
604.36

Question 6

Each Supplementary Apparatus has 3 equipment lists. Where are each of these lists located?

Answer 6

1. At the Station or Bureau where the Apparatus is assigned.
2. On the Apparatus itself.
3. An informational copy is kept at Tools & Equipment.

606.08

Question 7

Motors on Supplementary Apparatus should be ran for how long? How often?

Answer 7

30 minutes, once per week. 606.12

Question 8

All equipment (except the log book) should be removed from Supplementary Apparatus if it is expected to be in the shop longer than?

Answer 8

24 hours. 606.40

Question 9

When should SCBA’s be checked & cleaned?

Answer 9

Daily & after each use. 608.16

Question 10

Gasoline tools & Equipment should be ran for 10-20 minutes, until they reach what?

Answer 10

Operating temperature. 608.22

Question 11

What day are power tools tested?

Answer 11

Monday. 610.06

Question 12

Boat equipment checks and motor run tests are done on what day? And by who?

Answer 12

Wednesday. By the personnel at the assigned station. 612.06

Question 13

During the boat motor run test. The motor should be ran at what speed? For how long?

Answer 13

Shift speed. For 5 minutes. 612.20

Question 14

Mixed fuel for boats should be replaced when it is how old?

Answer 14

1 year. 612.32

Question 15

How should old boat fuel be disposed of?

Answer 15

Placing it in a vehicle that uses gasoline.
612.30

Question 16

If more than 1/2 of a hose 2 inches or larger needs replaced, what should be done?

Answer 16

Get the FAO’s permission to go OOS. 614.12

Question 17

When should folds of hose be changed?

Answer 17

Monthly. 614.24

Question 18

How often should rolled hose be unrolled, inverted & re-rolled?

Answer 18

Quarterly. 614.26

Question 19

When deciding where to obtain fuel, What are the locations and their level of priorities.

Answer 19

1. Division of fire fuel tanks.
2. Groves Road
3. Fleetfield card facilities (gas stations)

604.47

Question 20

If there are no items missing from an apparatus, should there be a notation of this?

Answer 20

Yes. An appropriate notation to this effect shall be entered in the company journal.

608.08

Question 21

After an emergency, whenever possible, when shall respiratory protective systems (SCBA) be returned to operation readiness?

Answer 21

Before leaving the fire or emergency scene to return to quarters.

606.18

Question 22

How often should a thorough inspection of ropes be performed?

Answer 22

A thorough inspection of all ropes shall be performed every 6 months.

608.28

Question 23

Inspection of all ropes shall be completed during what months?

Answer 23

May and November

618.04

Question 24

What is the minimum gallon quantity that gas and oil may be mixed?

Answer 24

At no time will gas and oil be mixed in less than 6 gallon quantities.

612.30

Question 25

Boat motor grease in the lower, needs to be replaced how often and when?

Answer 25

Annually, in April along with the preventative maintenance check.

612.34

Question 26

Who is responsible for testing the high pressure hose?

Answer 26

Hose repair technician.
614.90

Question 27

A hydrant shall be pumped dry if used for any purpose between the dates of…

Answer 27

October 15 and April 15 of each year.

640.02

Question 28

Whenever possible how many hydrants should be flushed at 1 time to avoid water hammer?

Answer 28

Flush 2 or 3 hydrants at one time as to avoid possible water hammer.

640.68

Question 29

What type of hydrant wrench shall be used during hydrant flushing?

Answer 29

Double-handled hydrant wrench

640.86

Question 30

During hydrant flushing, the flow of water should not exceed more than how many feet from the hydrant?

Answer 30

No more than 2’ to 3’ in front of the hydrant.

640.86

Question 31

If the water being flushed from the hydrant does not clear up after flowing for approximately 10 minutes, what should be done?

Answer 31

Allow the hydrant to continue to flow and check the hydrant from time to time.
If the water is clear close it, if not close the hydrant and notify the FAO.

640.90

Question 32

A hydrant should be placed out of service if it fails to flow after being opened how many turns?

Answer 32

6 turns.

640.92

Question 33

Can private hydrants be spotchecked by The Columbus division of fire?

Answer 33

Hydrants can be spot checked in order to ascertain a degree of compliance with city code.

640.112

Question 34

How are the individual hydrant districts identified? Example: 3-6-5E.

Answer 34

Unit, Battalion, Apparatus.
3 unit, Battalion 6, Engine 5.

640.120

Question 35

Ladders will be marked on the outside of both beams approximately _____ inches above the _____ of the ladder.

Answer 35

Approximately 18 inches above the butt of the Ladder.

602.26

Question 36

What are the 3 sections of the supplementary apparatus log book?

Answer 36

•Log Section
•Hose section
•Maintenance section

606.20

Question 37

Synthetic rubber ribbed hose folds shall be changed how many times a year and what months?

Answer 37

•3 times a year
•January, April, August.

614.24