Set 3

Question 1

• 0PSP03-ZQ-0028 Operator Logs*
• • *

If ECW supply temperature is < 75 ˚F and temperature lowers by ≥ 4 ˚F between consecutive log readings, what must the operator do?

Answer 1

Start all ECW pumps

Question 2

• 0PSP03-ZQ-0028 Operator Logs*
• • *

What is the limit for the OT∆T setpoint channel check?

Answer 2

• *10%**
• Instrument Error*

Limit can be exceeded if due to different loop temperatures.

Question 3

• 0POP01-ZA-0001 Admin Guidelines*
• • *

Following an outage, whose permission is needed to waive the initial valve lineup for a system?

Answer 3

Unit’s Operation Manager

One of the following conditions must exist:

• System has remained in service
• No work performed on system and system not modified
• If work performed, then process was controlled by ECO process

Note:
Valves in MAB pit rooms not required to be checked for initial valve lineups

Question 4

• 0POP01-ZA-0001 Admin Guidelines*
• • *

When is the locked component deviation log audited?

Answer 4

Monthly

• Note:*
• Shift Manger/Unit Supervisor responsible for ensuring log updated when locked valve positioned.*

Question 5

• 0PSP03-ZQ-0028 Operator Logs*
• • *

If AFD alarm has been inoperable for > 24 hrs, how often must AFD be logged?

Answer 5

Every 30 mins

Question 6

• 0POP01-ZQ-0022 Plant OPS Shift Routine*
• • *

If multiple channels are not available for a channel check, what must be done?

Answer 6

Compare indicated value with data obtained from previous log

Channel check compares channel’s indication with other indications monitoring the same parameter.

• Has nothing to do with acceptance criteria.

Question 7

• 0POP01-ZA-0001 Admin Guidelines*
• • *

When is Independent Verification NOT required?

Answer 7

Changing position does not render component incapable of performing it’s safety function

Question 8

• 0POP01-ZQ-0022 Plant OPS Shift Routine*
• • *

Who ensures appropriate entries are made in the control room logbook?

Answer 8

Unit Supervisor

Question 9

• 0POP01-ZA-0001 Admin Guidelines*
• • *

While checking the position of a normally locked closed valve, the valve operator cannot be moved due to the locking device. What is the proper method for checking the position of this valve?

Answer 9

Remove the locking device

Check valve in closed direction

Question 10

• 0POP01-ZA-0001 Admin Guidelines*
• • *

When are the emergency operations lockers audited?

Answer 10

Quarterly

Question 11

• 0POP01-ZQ-0022 Plant OPS Shift Routine*
• • *

Who approves the use of temporary logs?

Answer 11

Unit Supervisor
OR
Shift Manager

Question 12

• 0PSP03-ZQ-0028 Operator Logs*
• • *

What leakage rate would force the you to declare the containment sump level / flow monitoring system inoperable?

Answer 12

> 4.7 gpm

Question 13

• 0POP01-ZA-0001 Admin Guidelines*
• • *

When are valves in the AFWST pit required to be checked?

Answer 13

If security barrier is breached

Question 14

• 0POP01-ZA-0001 Admin Guidelines*
• • *

How is a locked throttle valve’s position verified?

Answer 14

Visual Observation

Local Indicators

SM’s permission required to move locked throttle valve.

Question 15

• 0POP01-ZQ-0022 Plant OPS Shift Routine*
• • *

Who reviews the safety function checklist?

Answer 15

Unit Supervisor

On-coming RO completes the safety function checklist

Question 16

• 0POP01-ZQ-0022 Plant OPS Shift Routine*
• • *

How far back in the logs should the on-coming watchstanders review?

Answer 16

Whichever is less:

Since last watch
OR
Prior 72 hrs

Question 17

• 0PSP03-ZQ-0028 Operator Logs*
• • *

What must be done if the QPTR alarm is NOT clear?

Answer 17

Perform 0PSP10-NI-0002 every 12 hrs

Question 18

• 0PSP03-ZQ-0028 Operator Logs*
• • *

What is the limit for the channel check of the power range nuclear flux instruments?

Answer 18

2%

If 1 channel Inop and RTP > 75% then perform 0PSP10-IIS-0004 every 12 hrs.