Prefix, Processing, and Locations Modes (2020) Flashcards
High Gain
Position: Full flexion of the fingers and thumb at their MCP joints, maintaining PIP and DIP extention. The finger tips proximate each other but do not touch each other.
Purpose: 1. HG selects the active Master Point Entry #1, #2, or #3
#1-Forehead #2-Umbilicus #3-Saggital Pt. GV-20
2. Clarifies test subject responding to testing, reduces crosstalk
3. Installs the S.C.O.P.E. Files for the Hand Mode language
Procedure: Touch Thumb on the Master Point and fingers around the MP. If weak, hold the contact until strong, Pause Lock. If strong, test a different Master Point for weakness to enter
Bio Electric Integration
Position: Bilateral full contact of patient’s hands, palm and fingers.
Purpose: To merge the asymmetric composition of the body into one global unit and to enhance the energy depth of a query.
Procedure: With patient’s hands together the Dr. will either clasp together both hands of the patient or another bilateral skin contact for ten seconds and then Pause Lock before scanning or testing
Cross Talk
Position: Thumb tip into palmer space between ring and little finger MCP
Purpose: Detects contradiction of patient’s physical gravitation posture with neurological posture resulting in inconsistencies of testing.
Procedure: 1. Check patient’s neurological posture and reposition them to process OR 2. Place your hand on the neurological posture that matches their current posture and Pause Lock to start processing.
Local
Position: Simultaneously apply the four finger pads to the dorsum of the thumb.
Purpose: Indicates that local tissue requires more correction before advancing to the next End Point (Treatment Point) and activates Tissue Files of SCOPE.
Procedure: Scan the SCOPE tissue files for the local tissue in need of correction. Combine Local, Priority, SCOPE to select sequence of local treatment.
Remote
Position: Apply the thumb palmer surface simultaneously to the dorsum of the four finger nails.
Purpose: Indicates a remotely located adverse influence upon the local point, needing correction in another region of the body.
Procedure: If positive, it activates the Location Files to show you where to treat.
Priority
Position: Little finger fully flexed, pad to the palmer surface of the fifth metacarpal, just proximal to the fifth MCP joint.
Purpose: To open the tissue files or to select the FIRST tissue or condition or product from a series of options saved in Pause Lock.
Procedure: Apply this mode immediately before tissue modes for acquiring only one selection. Apply after locating the End Point to confirm your selected treatment point.
End Point
Position: Thumb tip to the little finger tip. A specific 90 degrees angle of thumb and finger is required.
Purpose: To direct you to location points of treatment. Weakness indicates to treat, strong indicates no treatment is needed.
- *Procedure:** 1. Indicates when you may move to the next treatment point.
2. Local or Remote tests then direct you to the next point of treatment location.
3. Identifies a location ready for treatment.
Change Time
Position: Full extension of the thumb, index and middle fingers, with flexion of the ring and little fingers so the finger tips contact the palm of the hand.
Purpose: To include another time of day significant in the display of a problem.
Procedure: Priority / Time, will select the most significant time for the symptomatic display. To identify the time check for the active meridian, horary terminal point.
Change Posture or Position
Position: Thumb pad to the dorsum of the flexed index finger’s extended PIP joint.
Purpose: Indicates if a change of body posture orientation to gravity or joint position is significant in the display of a problem.
Procedure: Insert POP query to detect other Gravitational Postures or Individual joint Positions to access additional causative factors.
Change Hologram
Position: With the ring and little finger approximated, contact the thumb tip to the two finger tips.
Purpose: A positive test indicates to check other holographs representing the current local point.
Procedure: Check cranium, upper extremity, lower extremity for the same location for additional corrections.
Adaptation
Position: Thumb pad on the dorsum of the index finger DIP joint by slight flexion of the index PIP joint and the thumb joint.
Purpose: Adaptation may block access to Endpoint. Adaptation mechanisms may result in repetitive instability of corrections.
Procedure: If Endpoint fails to open, Adaptation reveals Submodes for Injury Recall, Reactive Tissue, Gait Dysfunction, and Miasm/DNA
Injury Recall
Position: Partially flexed four fingers with finger tips into the palm of the hand. The thumb nail touchs the radial side of the index finger PIP.
Purpose: This screen test identifies neurological memory flashback reactions of each file. Mechanoreceptors, Chemoreceptors, Neuro-Emotional, and bio-Electrical.
Procedure: Hold this mode at local site or Submode to the specific SCOPE File and Time / POP / IRC to clear all time, postures and positions.
Reactive Tissue
Position: Full flexion of the four fingers at the PIP and DIP joints, with full extension of the MCP joints.
Purpose: A screen test to identify a condition of over active tissue robbing energy, causing under active tissue. ie. Reactive muscle syndrome but Reactive can affect ANY tissue ie. Organs.
Procedure: Hold this mode at the positive point of lesion during a weak challenge until clear and strong. This mode may also process to identify the two tissue locations or EndPoint to treat.
Gait Dysfunction
Position: Tuck the ring and little finger tips to the palm, flex index and middle finger to touch the tip of the thumb.
Purpose: Screen test for conditions of ambulation causing instability and inflammation. Test is performed during a static posture to detect conditions not otherwise known until walking or running.
Procedure: Hold the mode at the point of detection until clear and strong or process with EndPoint.
Miasm / DNA
Position: Approximation of the index finger and ring finger nail margins
Purpose: Identifies a genetic propensity towards an emotional-somatic stress induced dysfunction.
Procedure: Upon locating a miasmic response, PL, Electric File, Priority, End Point and treat. Using More Local, or More Remote scan the SCOPE files for archived influences such as Methylation defects, Allergies, Injury Recall, and scar tissue.
Calculate
Position: Finger nails of flexed index and ring fingers contact the palmer surface of the thumb DIP joint.
Purpose: To transpose the files into numerical values for counting.
Procedure: After the calculation mode, PL, count with the finger tips to the palm and Pause Lock the count. Then More Remote, if positive repeat the count for the second digit, etc of the number.
Seconds
Position: Thumb tip to radial side of straight PIP joint of the index finger.
Purpose: Indicates time value in seconds.
Procedure: After Seconds mode, Calculation mode will display time elapse in seconds that a procedure will require to satisfy the processing.
Minutes
Position: Thumb tip to radial side of straight PIP joint of the middle finger.
Purpose: Indicates time value in minutes.
Procedure: After Minutes mode, Calculation mode will display time elapse in minutes that a procedure will require to satisfy the processing