Hand Modes - Complete (2020) Flashcards
High Gain
Position: Full flexion of the fingers and thumb at their MCP joints, maintaining PIP and DIP extention. The finger tips proximate each other but do not touch each other.
Purpose: 1. HG selects the active Master Point Entry #1, #2, or #3
#1-Forehead #2-Umbilicus #3-Saggital Pt. GV-20
2. Clarifies test subject responding to testing, reduces crosstalk
3. Installs the S.C.O.P.E. Files for the Hand Mode language
Procedure: Touch Thumb on the Master Point and fingers around the MP. If weak, hold the contact until strong, Pause Lock. If strong, test a different Master Point for weakness to enter
Bio Electric Integration
Position: Bilateral full contact of patient’s hands, palm and fingers.
Purpose: To merge the asymmetric composition of the body into one global unit and to enhance the energy depth of a query.
Procedure: With patient’s hands together the Dr. will either clasp together both hands of the patient or another bilateral skin contact for ten seconds and then Pause Lock before scanning or testing
Cross Talk
Position: Thumb tip into palmer space between ring and little finger MCP
Purpose: Detects contradiction of patient’s physical gravitation posture with neurological posture resulting in inconsistencies of testing.
Procedure: 1. Check patient’s neurological posture and reposition them to process OR 2. Place your hand on the neurological posture that matches their current posture and Pause Lock to start processing.
Local
Position: Simultaneously apply the four finger pads to the dorsum of the thumb.
Purpose: Indicates that local tissue requires more correction before advancing to the next End Point (Treatment Point) and activates Tissue Files of SCOPE.
Procedure: Scan the SCOPE tissue files for the local tissue in need of correction. Combine Local, Priority, SCOPE to select sequence of local treatment.
Remote
Position: Apply the thumb palmer surface simultaneously to the dorsum of the four finger nails.
Purpose: Indicates a remotely located adverse influence upon the local point, needing correction in another region of the body.
Procedure: If positive, it activates the Location Files to show you where to treat.
Priority
Position: Little finger fully flexed, pad to the palmer surface of the fifth metacarpal, just proximal to the fifth MCP joint.
Purpose: To open the tissue files or to select the FIRST tissue or condition or product from a series of options saved in Pause Lock.
Procedure: Apply this mode immediately before tissue modes for acquiring only one selection. Apply after locating the End Point to confirm your selected treatment point.
End Point
Position: Thumb tip to the little finger tip. A specific 90 degrees angle of thumb and finger is required.
Purpose: To direct you to location points of treatment. Weakness indicates to treat, strong indicates no treatment is needed.
- *Procedure:** 1. Indicates when you may move to the next treatment point.
2. Local or Remote tests then direct you to the next point of treatment location.
3. Identifies a location ready for treatment.
Change Time
Position: Full extension of the thumb, index and middle fingers, with flexion of the ring and little fingers so the finger tips contact the palm of the hand.
Purpose: To include another time of day significant in the display of a problem.
Procedure: Priority / Time, will select the most significant time for the symptomatic display. To identify the time check for the active meridian, horary terminal point.
Change Posture or Position
Position: Thumb pad to the dorsum of the flexed index finger’s extended PIP joint.
Purpose: Indicates if a change of body posture orientation to gravity or joint position is significant in the display of a problem.
Procedure: Insert POP query to detect other Gravitational Postures or Individual joint Positions to access additional causative factors.
Change Hologram
Position: With the ring and little finger approximated, contact the thumb tip to the two finger tips.
Purpose: A positive test indicates to check other holographs representing the current local point.
Procedure: Check cranium, upper extremity, lower extremity for the same location for additional corrections.
Adaptation
Position: Thumb pad on the dorsum of the index finger DIP joint by slight flexion of the index PIP joint and the thumb joint.
Purpose: Adaptation may block access to Endpoint. Adaptation mechanisms may result in repetitive instability of corrections.
Procedure: If Endpoint fails to open, Adaptation reveals Submodes for Injury Recall, Reactive Tissue, Gait Dysfunction, and Miasm/DNA
Injury Recall
Position: Partially flexed four fingers with finger tips into the palm of the hand. The thumb nail touchs the radial side of the index finger PIP.
Purpose: This screen test identifies neurological memory flashback reactions of each file. Mechanoreceptors, Chemoreceptors, Neuro-Emotional, and bio-Electrical.
Procedure: Hold this mode at local site or Submode to the specific SCOPE File and Time / POP / IRC to clear all time, postures and positions.
Reactive Tissue
Position: Full flexion of the four fingers at the PIP and DIP joints, with full extension of the MCP joints.
Purpose: A screen test to identify a condition of over active tissue robbing energy, causing under active tissue. ie. Reactive muscle syndrome but Reactive can affect ANY tissue ie. Organs.
Procedure: Hold this mode at the positive point of lesion during a weak challenge until clear and strong. This mode may also process to identify the two tissue locations or EndPoint to treat.
Gait Dysfunction
Position: Tuck the ring and little finger tips to the palm, flex index and middle finger to touch the tip of the thumb.
Purpose: Screen test for conditions of ambulation causing instability and inflammation. Test is performed during a static posture to detect conditions not otherwise known until walking or running.
Procedure: Hold the mode at the point of detection until clear and strong or process with EndPoint.
Miasm / DNA
Position: Approximation of the index finger and ring finger nail margins
Purpose: Identifies a genetic propensity towards an emotional-somatic stress induced dysfunction.
Procedure: Upon locating a miasmic response, PL, Electric File, Priority, End Point and treat. Using More Local, or More Remote scan the SCOPE files for archived influences such as Methylation defects, Allergies, Injury Recall, and scar tissue.
Calculate
Position: Finger nails of flexed index and ring fingers contact the palmer surface of the thumb DIP joint.
Purpose: To transpose the files into numerical values for counting.
Procedure: After the calculation mode, PL, count with the finger tips to the palm and Pause Lock the count. Then More Remote, if positive repeat the count for the second digit, etc of the number.
Seconds
Position: Thumb tip to radial side of straight PIP joint of the index finger.
Purpose: Indicates time value in seconds.
Procedure: After Seconds mode, Calculation mode will display time elapse in seconds that a procedure will require to satisfy the processing.
Minutes
Position: Thumb tip to radial side of straight PIP joint of the middle finger.
Purpose: Indicates time value in minutes.
Procedure: After Minutes mode, Calculation mode will display time elapse in minutes that a procedure will require to satisfy the processing
Days
Position: Thumb IP flexed so thumb tip is adjacent to the radial side of index finger MCP joint.
Purpose: Identifies days as a time increment for calculation.
Procedure: Day Mode, + Product, PL, Calculation Mode, count equals Dosage per Day.
Calculation Mode, + Day Mode = Dosage for days duration.
Weeks
- *Position:** Thumb IP flexed so thumb tip is adjacent to the radial side of middle finger MCP joint.
- *Purpose:** Identifies weeks as an increment of time for calculation.
Procedure: Week Mode, + Product, PL , Calculation Mode, count equals Dosage per Week
Calculation Mode, + Week Mode, = Dosage weeks duration.
Months
Position: Thumb IP flexed so thumb tip is adjacent to the radial side of ring finger MCP joint.
Purpose: Identifies months as an increment of time for calculation.
Procedure: After Dosage per day or week, PL, Calculation, Month, PL, count = Dosage for how many months duration.
Location - File #1
Position: Tip of Index finger into the center of the palm.
Purpose: Submode of the Spine = Cervical spine, Upper extremity = Shoulder, Lower extremity = Hip, Ribs = 1,2,3, or Non-spinal cervical region.
Procedure: Test the submode locations for distress activity.
(See Sub-mode Flow Chart)
Location - File #2
Position: Tip of middle finger into the center of the palm.
Purpose: Submode of the Spine = Thoracic spine, Upper extremity = Elbow, Lower extremity = Knee, Ribs = 4,5,6, or non-spinal thoracic region.
Procedure: Test the Submode locations for distress activity
(See Sub-mode Flow Chart)
Location - File #3
Position: Tip of ring finger into the center of palm.
Purpose: Submode of the Spine = Lumbar spine, Upper extremity = Wrist, Lower extremity = Ankle, Ribs = 7,8,9, or non-spinal lumbar region.
Procedure: Test the Submode locations for distress activity.
(See Sub-mode Flow Chart)
Location - File #4
Position: Tip of little finger into the center of the palm.
Purpose: Submode of Spine = Sacral / Pelvis, Upper extremity = Hand, Lower extremity = Foot, Ribs = 10,11,12, or non-spinal pelvis region. Submode of Location File 4 = Cranium, C1/2, TMJ, C2/3,
Procedure: Test the Submode locations for distress activity.
(See Sub-mode Flow Chart)
Location - File #5
Position: Tips of all four fingers into the palm, thumb in full extension.
Purpose: Submode of Spine = Coccyx, Upper extremity = Finger, Lower extremity = Toe, Ribs = Xyphoid, or non-spinal Perineum region.
Procedure: Test the Submode locations for distress activity.
(See Sub-mode Flow Chart)
Location - Upper Extremity
Position: Apply tip of thumb nail into the index finger DIP on the midline of the palmer surface.
Purpose: The Submode options are the areas of the shoulder, arm, elbow, forearm, wrist, hand or fingers.
Procedure: Continue to submode with the five location files for the UX segment. Locate, Touch and Pause Lock. Treat as indicated by Local / Priority / S.C.O.P.E
Location - Lower Extremity
Position: Apply tip of thumb nail into the index finger PIP on the midline palmer surface.
Purpose: The Submode options are the areas of the hip, thigh, knee, leg, ankle, foot, or toes.
Procedure: Continue to submode with the five location files for the LX segment. Locate, Touch and Pause Lock. Treat as indicated by Local / Priority / S.C.O.P.E
Location - Ribs
Position: Apply middle finger nail into dorsum of extended index finger Dip joint.
Purpose: Point of treatment is located in the rib cage region.
Procedure: Continue four File submodes, dividing the 12 ribs by four, assigns three ribs per sub-mode; 1,2,3 / 4,5,6 / 7,8,9 / 10,11,12. plus Thumb for Xyphoid. POP for specific location. Treat as indicated by Local / Priority / S.C.O.P.E
Location - Spine
Position: Index finger PIP joint flexed over the thumb dorsum for the index finger pad to contact the radial side of the PIP of the thumb.
Purpose: To identify the spinal column and the attached tissue as the point of treatment.
Procedure: Continue five File submodes to locate the cervical, thoracic, lumbar, sacral and coccyx region of the spine. Treat as indicated by Local / Priority / S.C.O.P.E
Location - Cranial Region
Position: Apply thumb pad to pad of little finger.
Purpose: To locate non-spinal tissue, organs and acupoints on or in the Cranium.
Procedure: As a Submode to Organ/ locate on or in the cranium and Treat as indicated by Priority / S.C.O.P.E. tissue
Location - Cervical Region
Position: Thumb nail into the index finger pad.
Purpose: To locate non-spinal tissues, organs, and acupoints of the neck.
Procedure: A location mode for the tissues of the anterior cervical region or neck forward of the coronal plane. The superior boundary is the submandibular margin and occipital condyles; the inferior boundary is the superior margin of the clavicles and manubrium
Location - Thoracic Region
Position: Thumb nail into the middle finger pad.
Purpose: To locate non-spinal tissues, organs, and acupoints of the chest.
Procedure: A location mode for the tissues of the anterior thoracic region or chest forward of the coronal plane. The superior margin of the clavicles and manubrium; to the inferior edge of the xyphoid tip and costal cartilage margin
Location - Lumbar Region
Position: Thumb nail into the ring finger pad.
Purpose: Using Local, Priority to locate non-spinal soft tissue, organs, vessels and acupoints of the abdomen.
Procedure: A location mode for the lumbar region forward of the coronal plane. The inferior costal-cartilage margin, to a line between the anterior superior iliac spines crossing just inferior to the umbilicus
Location - Pelvic Region
Position: Thumb nail into the little finger pad.
Purpose: To process with Local, Priority, SCOPE for tissue of the Pelvis.
Procedure: A location mode for non-spinal tissue of the pelvic region forward of the coronal plane. The superior boundary is line between the anterior superior iliac spines, the inferior boundary is the inguinal ligaments and pubic bone superior margin
Location - Cranium
Position: Apply thumb pad to pad of little finger.
Purpose: Indicates point of treatment is located in or on the skull.
Procedure: Treat as indicated by Priority / S.C.O.P.E. tissue.
Location - C1 / Occiput
Position: Apply thumb nail to little finger DIP joint crease on the palmer midline.
Purpose: Indicates point of treatment is on C-1 / Occiput or attached tissue.
Procedure: Treat as indicated by Local / Priority / S.C.O.P.E. tissue.
Location - TMJ Mandible
Position: Apply thumb nail to little finger PIP joint crease, palmer midline.
Purpose: Indicates condition or point of treatment on the mandible, or dyskinetic temporal mandibular fossa.
Procedure: Pause lock positive mode. Determine Priority deviant jaw side and position. Treat as indicated by the Local / Priority / S.C.O.P.E. tissue. More Remote also recommended.
Location - C2 / C3
Position: Apply thumb nail to the little finger MCP joint crease, palmer midline.
Purpose: To identify point of treatment on C-2 or attached tissue.
Procedure: Treat as indicated by Local / Priority / S.C.O.P.E. tissue.
Structural File
Position: Tip of Index finger into the center of the palm.
Purpose: Indicates a Structural tissue disorder. Histological morphology of each tissue resonates a specific frequency. This frequency has been used to design each tissue mode.
Procedure: Test the Structure modes and treat as indicated.
Chemical File
Position: Tip of middle finger into the center of the palm.
Purpose: Indicates a chemical disorder. Each biochemical substance has a molecular frequency used to design a resonant hand mode.
Procedure: Check chemical submodes for the priority chemical imbalance, treat as indicated or supplement as needed.
Psyche / Stress File
Position: Tip of ring finger into the center of palm.
Purpose: Indicates a stress induced functional disorder. Each mental, emotional and environmental stress has a chemical component or a specific frequency used to design categorical hand modes.
Procedure: Submode for type of stress, desensitize via G14 acupoint or treat as indicated
Electrical File
Position: Tip of little finger into the center of the palm.
Purpose: Indicates a bio-Electrical dysfunction
Procedure: Pause Lock the mode and hold the acupoint, or For microcurrent engage Local, PL, Calculate, and count the amplitude, then engage Remote, PL, Calculate, count the frequency, test for wave form and polarity
Organ File
Position: Apply the tips of all four finger into the palm with the thumb in full extension.
Purpose: Indicates an Organ dysfunction..
Procedure: Pause Lock the mode, Local/Remote, Submode the thumb nail into each finger pad for the body cavity location of the organ. Check the organ reflex points. Priority SCOPE and treat as indicated.
Bone Displacement
Position: Thumb pad to the index finger pad.
Purpose: Indicates malposition of an osseous joint.
Procedure: Realignment may be with mechanical pressure or with muscle reactivation. Adjust to the Priority vector with consideration of Priority posture (Orientation to gravity).
Muscle
Position: Apply thumb pad on the dorsum of the index finger nail.
Purpose: Displays weak, inhibited, dysfunctional muscle.
Procedure: For Local application challenge for stretch or compression of the axial line of fibers. Remote application requires finding Location and another Priority / Tissue procedure.
Tendon
Position: Thumb DIP joint to radial side of straight PIP joint of the index finger, fully flexed at the MCP joint.
Purpose: Indicates a Golgi Tendon defect.
Procedure: Compress the fibers along the axis of this tendon. Challenge for other angles of significance. With inflammation find the associated disc.
Ligament
Position: Thumb DIP joint to the radial side of the fully flexed PIP joint of the index finger, also fully flexed at the MCP joint.
Purpose: Indicates a Ligament Golgi defect.
Procedure: Compress the fibers along the axis of the ligament.
Challenge for the other angles of significance.
Spinal Disc #1 Intensity
Position: Thumb tip no nail to the radial side of the index finger DIP.
Purpose: Reveals a slight spinal disc inflammation with neuropathy.
Procedure: Pause Lock and scan the spine to locate. Then Local, Remote, Priority, SCOPE, treat as indicated. OR Release the fixation with associated ligament and restore movement with associated remote muscle.
Spinal Disc #5 Intensity
Position: Slide radial side of the index finger DIP to Thumb DIP.
Purpose: Reveals a moderate spinal disc inflammation with protrusion and neuropathy
Procedure: Submode Local, Remote, Priority SCOPE. Release the fixation with associated ligament and restore movement with associated remote muscle. Ice for ten minutes.
Spinal Disc #10 Intensity
Position: Slide radial side of the index finger DIP to Thumb PIP.
Purpose: Reveals significant disc inflammation with greater protusion and neuropathy.
Procedure: Submode Local, Remote, Priority SCOPE. Release the fixation with associated ligament and restore movement with associated remote muscle. Ice for ten minutes per hour PRN.
Spinal Disc #15 Intensity
Position: Slide radial side of the index finger DIP proximate to Thumb MCP
Purpose: Reveals extreme disc inflammation with extreme disc protrusion with neuropathy.
Procedure: During weakness perform respiratory assist test to determine recovery potential. Treat with Submode Local, Remote, Priority SCOPE. Release the fixation with associated ligament and restore movement with associated remote muscle. Ice for ten minutes per hour PRN.
Pain
Position: Thumb nail into the radial side of the index finger distal phalanx.
Purpose: Indicates active nociceptor pain signals.
Procedure: Pause Lock the active signal and process with Local, Priority, SCOPE to identify the Local tissue. Endpoint to locate treatment of Local or Remote Priority.
Neuropathy #1
Position: Tip of thumb nail into index finger pad midline.
Purpose: Identifies nerve inflammation and dysfunction resulting from peripheral entrapment.
Procedure: Submode to End Point for Local or Remote treatment location and treat as Priority, SCOPE Tissue File indicates.
Neuropathy #2
Position: Tip of thumb nail into index finger middle phalanx palmer midline.
Purpose: Identifies nerve inflammation and dysfunction resulting from spinal nerve root entrapment; subluxation
Procedure: Submode to End Point for Local or Remote treatment location and treat as Priority, SCOPE Tissue File indicates or adjust the vertebral orientation.
Neuropathy #3
Position: Thumb nail into index finger proximal phalanx palmer midline.
Purpose: Identifies nerve inflammation and dysfunction resulting from Meningeal or Dural torque within the spinal canal.
Procedure: Submode to End Point for Local or Remote treatment location and treat as Priority, SCOPE Tissue File indicates ie. compression of transverse ligament bridging the spinal segment
Cryotherapy
Position: Place index finger nail tip on ulna side of thumb, perpendicular to the thumb, exactly in line with the proximal margin of the thumb nail.
Purpose: To determine the need for Cryotherapy for the reduction of inflammation and swelling.
Procedure: For maximum results, apply frozen gel pack wrapped in a paper towel, directly to the bare skin for no more than 10 minutes, once per hour.
Neuro Lymphatics
Position: The tip of the partially flexed Index finger nail into the joint crease, ulna side of the thumb DIP
Purpose: Deficient lymph drainage for the muscle function.
Procedure: Locate the Priority Neuro-lymphatic option and vigorously rub lightly for ten to twenty seconds.
Neuro Vascular
Position: Apply partially flexed index finger and nail tip into thumb distal margin of PIP joint ulna side.
Purpose: Indicates neurogenic vascular reduction to the muscle.
Procedure: Locate the Priority, Neuro-Vascular location point, then touch lightly for 10-15 seconds, or Priority / EndPoint.
Vascular Deficit
Position: Apply the open flexed index finger distal phalanx dorsum, flat against the ulna aspect of the thumb so the index DIP aligns with the thumb DIP.
Purpose: Indicates circulatory compromise by arterial constriction or occlusion. May correspond with Oxygen deprivation.
Procedure: Respiratory Assist Test for conservative care potential. Locate release point along inguinal fossa up and over the iliac crest activates Spinal division of the diaphragm. Left side abdomen for deficit below diaphragm. Right side abdomen for deficit above the diaphragm.
Inflammation
Position: Fully flexed index finger closed is cradled into the ulna aspect of the thumb in line with the thumb.
Purpose: General indicator of tissue inflammation.
Procedure: Process with Priority / S.C.O.P.E tissue and treat as indicated. If inflammation mode persists after treatment, test for and apply ice 10 minutes per hour as needed.
Bursa
Position: Fully flexed index finger is angled across the ulna aspect of middle phalanx of the thumb.
Purpose: Indicates inflammation of the bursa sack around a joint.
Procedure: Process with Local / Priority / Bursa / vector / compression.
Swelling
Position: Insert the distal phalanx of the thumb between the PIP joints of the middle and index finger.
Purpose: Identifies the presence of physiological swelling.
Procedure: Process with Priority / S.C.O.P.E tissue and treat as indicated. May be reaction of Viscera, Trauma, or Vascular. As Submode of spine this indicates swelling of facets.
Fixation / Range of Motion
Position: Closed fist position with the index finger full extension with the thumb flexed over the middle finger.
Purpose: Identifies restriction of singular or compound dynamics of joint movement referred to fixation.
Procedure: Determine plane of fixation, locate ligament parallel to the plane of fixation and correct the ligament OR process for Priority, Endpoint, Time, POP, Endpoint.
Soft Tissue Displacement
Position: Thumb tip to the index finger tip, NO nail contact.
Purpose: Indicates malposition of any soft tissue.
Procedure: Using mechanical pressure, adjust to the priority vector of correction.
Periosteum
Position: Thumb palmer surface DIP to the index finger palmer surface of DIP.
Purpose: Indicates trauma to the bone surface. If a fracture is suspected, perform the tuning fork, tap test and respiratory assist test. If vibration on the bone causes weakness and inspiratory assist fails to restore strength, the fracture test is positive. X-RAY the Local / Periosteum indicator.
Procedure: Process with Priority / S.C.O.P.E tissue and treat as indicated or Micro-current with 0.6 HZ., 91.0 Hz. & 9.0 Hz. Negative polarity.
Meniscus
Position: Place the thumb pad on the radial side of the fully flexed DIP joint of the index finger.
Purpose: Indicates extrusion or displacement of the cartilaginous pad of tissue between bones.
Procedure: This requires a manipulation of the meniscus margin and muscle balancing.
Adhesion
Position: Place the ulna side of the thumb DIP to the radial side of the fully flexed DIP joint of the index finger.
Purpose: Displays fascia restrictions and connective tissue proliferation.
Procedure: Process as indicated or check for Adaptation, Injury Recall. Deeply stretch the tissue with fiber manipulation.
Scar Tissue
Position: Place the ulna side of the thumb DIP to the ulna side of the fully flexed DIP joint of the index finger.
Purpose: Indicates post traumatic tissue repair with contractures of tissue.
Procedure: Process as indicated with Local vectors of force. Consider Adaptation, Injury Recall. Penetrating oils or micro-current may soften the scar.
Deficiency
Position: Thumb pad to the distal pad of the middle finger.
Purpose: Indicates inadequate amount of a substance.
Procedure: Select an appropriate product, then start the patient on the calculated dosage, or increase previous dosage to clear deficiency.
Toxicity
Position: Thumb pad to the dorsum of the middle finger nail.
Purpose: Indicates too much of a substance in the body.
- *Procedure:** 1. Reduce dosage of current product or
2. Select appropriate counter agent to clear toxicity or
3. Process with Toxicity / Metabolic / Priority / Organ and treat as indicated to clear toxic condition.
Allergy
Position: All distal finger pads approximated to the distal pad of the thumb.
Purpose: To indicate chemical sensitivities, intolerances and rejection of external or internal substances that initiate inflammatory reactions.
- *Procedure:** Format Chemical File / Introduce product that indicates allergy response / PL.
1. Treat with either the BSI Allergy acupoint protocol or
2. Priority / Electric File / Endpoint (acupoint).
Allergy I Ingested
Position: Ulna side of index finger, distal one-half of the distal phalanx (edge of the nail bed) to radial side of middle finger proximal margin of PIP joint.
Purpose: Identifies the entrance of allergen as oral ingestion.
Procedure: Allergy / #1 / PL Test from vials or food and beverage samples for specific items and treat with BSI allergy protocol or process with Priority / Electric File / Endpoint (acupoint).
Allergy II Inhaled
Position: Thumb dorsum proximal to nail. To palmer PIP.
Purpose: Identifies the entrance of allergen by nasal inhalation.
Procedure: Allergy / #2 / PL Test from vials, aroma samples or jars of air pollutant samples and treat with BSI allergy protocol, homeopathy or process with Priority / Electric File / Endpoint (acupoint).
Allergy III Metabolic
Position: Thumb nail to the middle finger DIP palmer midline.
Purpose: Identifies the source of inflammatory reaction due to faulty metabolic processing.
Procedure: Allergy / #3 / PL Format Priority / Organ and process as BSI indicates to correct the metabolic dysfunction.
Allergy IV Injected
Position: Thumb nail tip onto the PIP radial midline.
Purpose: Identifies the entrance of allergen as sub-dermal injection into the skin via inoculation, insect sting, animal or snake bite, and scratch or abrasion.
Procedure: Allergy / #4 / PL Test from vials or samples of venoms, microbes, and plants and treat with BSI allergy protocol, homeopathy or process with Priority / Electric File / Endpoint (acupoint).
Allergy V Topical
Position: Thumb pad to fully flexed middle finger PIP dorsum.
Purpose: Identifies the entrance of allergen as topical contact with the skin, transdermal absorption.
Procedure: Allergy / #5 / PL Test from vials or samples of skin products, cometics, bath / shower water, fabrics and laundry products, plants and grasses. Treat with BSI allergy protocol or format Priority / Electric File / Endpoint (acupoint).
Allergy VI EMF
Position: Tip of index finger nail into the middle finger pad.
Purpose: Identifies the reaction to certain electronic frequencies or devices
Procedure: Allergy / #6 / PL the positive test and process with BSI allergy protocol or format with Priority / Electric File / Endpoint.
Inform patient about reducing electronic exposure… LED clocks, computer, cell phone, microwaves, electric blankets, magnets, crystal jewelry. Test work area with gauss meter for hidden power boxes and electrical conduits.
Allergy VII Auto-Immune
Position: Index finger tip on middle finger PIP dorsum.
Purpose: Identifies allergy type reaction of auto immune system rejecting tissues and fluids of your own body.
Procedure: Allergy / #7 / Test with vials or samples for specific tissue or fluid identification. Treat with BSI allergy protocol or format with Priority / Electric File / Endpoint (acupoint).
Allergy VIII Hormonal
Position: Thumb distal pad on middle finger distal nail edge.
Purpose: Identifies allergy reaction to your hormones.
Procedure: Allergy / #8 / PL Test from vials for specific hormone and process with BSI allergy protocol or process with Priority / Electrical File / Endpoint (acupoint).
Kreb’s Cycle
Position: Palmer DIP joint of thumb onto radial aspect of fully flexed PIP joint of middle finger.
Purpose: To identify Ammonia Toxicity from a Kreb’s Cycle defect of Citric Acid and / or Urea Cycle failure
Procedure: After Chemical File / Deficiency / Kreb’s Cycle / Priority, select a product that restores the Kreb’s Cycle productivity OR format with Kreb’s / Metabolism / Priority / Endpoint.
Bacteria Slider
Position: Start with Thumb tip on radial aspect of the middle finger DIP #1-2-3 joint and slide palmer surface of thumb across the radial side of middle finger DIP up to a final position of the Thumb PIP contacting the middle finger DIP.
Purpose: Indicator for bacterial infestation.
Procedure: When indicated as Priority, test for antibacterial remedies. (Topical agents, internal systemic remedies or BSI processing)
Fungus
Position: Radial corner of middle finger nail onto the thumb pad.
Purpose: Indicator for fungal infections.
- *Procedure:** 1. Chemical File / Fungus / Priority / Deficiency / test antifungal products OR
2. Format Fungus at AOL / Priority / BSI processing
Parasite Slider
Position: Tip of the Index and Middle fingernails on ulnar side #1-2-3 of the Thumb, distal segment. This mode is expanded in its scan by sliding proximal along the entire length of the ulnar side of the Thumb. Then rotate fingers to dorsom/palmer position on Thumb ulnar side and slide proximal to distal to the end of the Thumb.
Purpose: Indicator for various parasitic infestations.
- *Procedure:** 1. Chemical File / Priority / Test anti-parasitic remedies OR
2. Format Parasite at active MP / Priority / BSI processing
Yeast Slider
Position: Tip of the Thumb nail into the Chemical finger pad and the #1-2-3 Index fingernail onto the ulnar side of the Thumb distal phalanx. Expand the scan by sliding the Index finger along the ulnar side of the Thumb to the proximal end of the Thumb.
Purpose: Indicator of Candida yeast overgrowth (acetaldehyde toxicity)
- *Procedure:** 1. Chemical File / Yeast / Toxicity / Priority / SCOPE Chemical deficiency / Calculate dosage
2. Micro current— Chemical File / Yeast / Priority / Electrical File / Calculate frequency / Sine Wave / Neg. Polarity. Treat at the level of C2 with power into the right side and receiving electrode left side of C2.
Lipid Metabolism
Position: Contact tip of thumb and middle finger tip without contacting the nails
Purpose: Indicates fat metabolism defect
Procedure: Chemical File / Lipid / Priority / Product test or Organ / Priority / End Point.
Trace Minerals
Position: Ulnar corner of thumbnail to radial one-third of the middle finger tip.
Purpose: To identify biochemical deficiency of trace minerals.
Procedure: Positive Trace Minerals / Priority / Deficiency / Prioritize products to fulfill the deficiency indicator.
Metal Toxicity
Position: Ulnar corner of thumb nail to ulnar one-third of middle finger tip
Purpose: To identify biochemical defects associated with toxic metals
Procedure: Positive Metal toxicity / Priority / Deficiency / Prioritize products to neutralize the toxic metal (LV Renew Super Ox etc)
Methylation Dysfunction
Position: Tip of the middle fingernail into the joint crease of the MCP joint of the thumb.
Purpose: Indicator for defect of the five cycles of methylation
Procedure: Positive Methylation / Toxicity / Priority / Deficiency Product testing for the missing ingredient causing the cycle defect.
Virus Slider
Position: Tip of Thumb onto the radial side of the middle finger PIP joint #1-2-3 and slide Thumb palmer surface across the radial side of middle finger PIP joint as far as Thumb flexion allows.
Purpose: Indicator for viral infections.
Procedure: Angle of Louis (AOL) or suspected location with Chemical File / Virus Slider / PL a positive test and test antiviral products for therapeutic value.
Neurotransmitter
Position: Tip of Thumb onto the radial side of the middle finger #1-2-3 middle Phalanx and slide the Thumb palmer surface across the middle phalanx as far as Thumb flexion allows.
Purpose: Indicator for imbalance or deficiency of brain chemistry
Procedure: AOL or Cranial test point with Chemical File / Neurotransmitter slider / PL positive test and scan with vials to identify specific Neurotransmitter and then test products for therapeutic value to increase specific Neurotransmitter production.
H. Pylori
Position: Ulnar surface of distal phalanx of the Thumb on middle finger dorsum between the nail and DIP.
Purpose: Identifies the H-Pylori bacteria.
Procedure: AOL or Gastric contact with Chemical File / H-Pylori / PL and test products for therapeutic value.
Lyme Spirochete
Position: Ulna surface of distal phalanx of the thumb on flexed middle finger nail.
Purpose: Identifies the condition of active Lyme spirochete.
Procedure: We recommend testing the five formulations of Dr. Allen Lindsley to match the precise strain of Lyme. Typical treatment is 8-12 weeks.
Gluten Reaction
Position: Ulna surface of the thumb DIP on the flexed middle finger dorsum between nail and DIP
Purpose: Identifies an inflammatory reaction to the consumption of Gluten.
Procedure: Desensitize the body to Gluten and restrict Gluten consumption until all signs of inflammation have subsided. Then reintroduce sample of Gluten to determine degree of continued sensitivity.
Lyme Neurotoxin
Position: Middle finger tip on the Thumb between nail and DIP.
Purpose: Identifies the continuing effects of the Lyme neurotoxin.
Procedure: Test for products that nullify the neurotoxic effect. Great resolution has been obtained with Rutin Plus and Glyco-Lyph by NW.
Hormone Imbalance
Position: Thumb nail into the proximal phalanx of the middle finger palmer side midline.
Purpose: Indicates hormonal imbalance.
Procedure: Chemical File / Hormonal / Deficiency (select deficient hormone) / Priority / Deficiency now test nutrition that promotes specific hormonal productivity.
Blood Brain Barrier Defect
Position: Thumb nail into the radial side of the middle finger proximal phalanx.
Purpose: Positive test indicates compromise of the Blood Brain Barrier and associated with the gut / brain syndrome.
Procedure: Test performed on the Brain Cranial test point / PL / Remote / locate area of remote influence and identify the organ (colon, small intestine, or ICV then process or select product for resolution.
Leaky Gut
Position: Thumb nail under the middle finger proximal phalanx.
Purpose: Indicates deterioration of the intestinal lining contributing to remote inflammatory conditions of brain, joints and muscles.
Procedure: Scan abdominal area to a precise point and identify intestinal tissue. Process to determine source of intestinal deterioration such as vascular necrosis, chronic inflammation of food allergies, neuropathy etc.
Homeopathic Remedy
Position: Thumb nail into the radial side of the middle finger PIP joint.
Purpose: Identifies a suitable product for resolution of a condition.
Procedure: After positive test / PL / scan a homeopathic kit or a selected group of vial / separate from other vials and test for therapeutic effect.
Mitochondrial Dysfunction
Position: Ulna side of Thumb pressed onto the radial side of the middle finger distal phalanx.
Purpose: Identifies Herbicide, elemental and parasitic toxicity disruption with production of energy via Mitochondria
Procedure: Test with Toxicity mode for Toxins and parasite. With Deficiency scan for a therapeutic product.
Blood Sugar Dysfunction
Position: Thumb nail into the radial side of the middle finger distal phalanx.
Purpose: Identifies condition of Blood sugar deviation associated with Liver / Pancreas dysfunctions.
Procedure: Process with BSI to restore auto regulation of blood sugar. Test Toxicity mode (High Blood Sugar) or Deficiency mode (Low Blood Sugar) and dietary recommendations.
Metabolic Dysfunction
Position: Thumb nail into the palmer crease of the middle finger DIP.
Purpose: Indicates metabolic functional issues are interfering with normal physiology activities… most relevant to biochemistry and auto immune activity.
Procedure: Chemical File / Metabolic / Priority / Organ / BSI processing
Flower Remedies
Position: Tips of the middle and ring fingers into the palmer depression.
Purpose: Identifies flower remedies as the therapeutic agent.
Procedure: PL Flower Remedy, Chemical Deficiency, Priority, scan vials to select. Test for More Local or Remote, for any additional remedies Test each vial for number of drops into the one formula. Then hold all vials and PL. Succus to match the resonance of the group of selected vials. Now calculate dosage.
Red Blood Cell
Position: Fully flexed Index and Ring fingers with tips into the palm. Thumb, Middle and Little finger in full extension
Purpose: Identifies deficit of Red Blood Cells significant in hypoxia and some forms of anemia.
Procedure: Process for parasitic activity and/or clinical studies for medullary bone disease
Oxygen Deprivation
Position: Index finger with fully flexed DIP and PIP while proximal phalanx is adjacent, parallel and contacting the middle finger in extension.
Purpose: Indicates hypoxia associated with not breathing, anemia, vascular compromise, stroke, blood clot, etc.
Procedure: Whether local or systemic quickly assess for visceral, or vascular compromise and process. Lack of immediate recovery may need Emergency medical intervention.
Dehydration
Position: Index finger with MCP extension and fully flexed DIP and PIP while Index finger phalanx contacts the middle finger proximal phalanx.
Purpose: Indicates cellular dehydration.
Procedure: Acute distress may require IV hydration but usually substantial water in small amounts over several hours will restore physiology.
Enzyme
Position: Index finger tip on dorsum of middle finger PIP.
Purpose: Indicates an enzyme deficiency.
Procedure: After entering Chemical File / Deficiency / if Enzyme mode is positive , PL, then find the priority enzyme or mixture to restore the normal metabolic function.
pH Imbalance
Position: PIP and DIP in extension while ring finger is flexed so the its distal phalanx contacts the middle finger, middle phalanx midpoint
Purpose: Identifies and imbalance of the pH factor of an organ or tissue.
Procedure: Follow the positive test with Toxicity mode for too high or Deficiency mode for too low
Organ File
Position: Apply the tips of all four finger into the palm with the thumb in full extension.
Purpose: Identifies the location of organ post ganglionic test points of a visceral condition or an organ that is in distress usually associated with the exhaustion phase of adaptation.
Procedure: PL Organ mode, test body cavity Submode to locate Organ. Test for Priority, SCOPE and treat as indicated.
Visceral Somatic Reaction
Position: Thumb, Index and Ring finger MCP in extension, Thumb pad to Index finger pad andMiddle and Little finger tip into the palm
Purpose: Indicates an organ influence on the muscle skeletal system.
Procedure: Pause Lock the active VSR mode, Priority / Organ / Locate / Local / Priority / SCOPE, Process (identifies the organ) OR VSR / Priority / Time / POP / End Point / Local / Priority / SCOPE
Diaphragm Spinal Division
Position: Thumb, Index and Ring finger MCP in extension, Middle and Little finger tip into the palm
Purpose: Indicates lumbar spinal attachment dysfunction that anchors the diaphragm and relieves vascular constrictions.
Procedure: A versatile mode of location, organ, muscle tissue. A one of a kind mode to identify a portion of a diaphragm dysfunction.
Cranial Region / Cavity
Position: Apply thumb pad to pad of little finger.
Purpose: To locate non-spinal tissue, organs and acupoints on or in the Cranium.
Procedure: As a Submode to Organ/ locate on or in the cranium and Treat as indicated by Priority / S.C.O.P.E. tissue.
Cervical Region / Cavity
Position: Thumb nail into the index finger pad.
Purpose: To locate non-spinal tissues, organs, and acupoints of the neck.
Procedure: A location mode for the tissues of the anterior cervical region or neck forward of the coronal plane. The superior boundary is the submandibular margin and occipital condyles; the inferior boundary is the superior margin of the clavicles and manubrium.
Thoracic Region / Cavity
Position: Thumb nail into the middle finger pad.
Purpose: To locate non-spinal tissues, organs, and acupoints of the chest.
Procedure: A location mode for the tissues of the anterior thoracic region or chest forward of the coronal plane. The superior margin of the clavicles and manubrium; to the inferior edge of the xyphoid tip and costal cartilage margin.
Lumbar Region / Cavity
Position: Thumb nail into the ring finger pad.
Purpose: Using Local, Priority to locate non-spinal soft tissue, organs, vessels and acupoints of the abdomen.
Procedure: A location mode for the lumbar region forward of the coronal plane. The inferior costal cartilage margin, to a line between the anterior superior iliac spines crossing just inferior to the umbilicus.
Pelvic Region / Cavity
Position: Thumb nail into the little finger pad.
Purpose: To process with Local, Priority, SCOPE for tissue of the Pelvis.
Procedure: A location mode for non-spinal tissue of the pelvic region forward of the coronal plane. The superior boundary is line between the anterior superior iliac spines, the inferior boundary is the inguinal ligaments and pubic bone superior margin.
Psyche File
Position: Tip of ring finger into the center of palm.
Purpose: Indicates a stress induced Psycho-somatic functional disorder.
Procedure: Submode for type of stress, determine the level of stress dysfunction with
Phase One MP #1 at Glabella
Phase Two MP #2 at Umbilicus
Phase Three MP #3 at Cranium GV 20
Treat selected MP / Priority, or left frontal GB 14
Mental Stress
Position: Thumb pad on the ring finger pad.
Purpose: Indicates mental stress associated with dysfunction.
**Procedure:** #1 Submode to MP 1, MP 2, MP 3, to determine level of stress, Treat Priority End Point as indicated. #2 Submode Priority, Chemical File, Flower Essence, select as many as necessary to resolve stress induced dysfunctions. #3 Recommend recreation, relaxation, vacation, treat GB 14
Emotional Stress
Position: Thumb pad on dorsum of the ring finger nail.
Purpose: Indicates emotional stress is associated with dysfunction.
**Procedure:** #1 Submode to MP 1, MP 2, MP 3 to determine level of stress, Priority, EP, treat as indicated or... #2 Submode Priority, Bio Electric File, and Locate series of Acupoints to clear ie. G-14 or... #3 Submode Priority, Chemical File, Flower Essence, select as many as necessary to resolve stress induced dysfunctions.
Thermal Stress
Position: Tip of thumb nail into the radial side of PIP.
Purpose: Displays the environmental stress of extremes or alternating changes of the temperature.
**Procedure:** #1 Pause Lock the positive Thermal challenge, Format for Local / Thermal /PL/ Priority / EndPoint, Treat as indicated. #2 For heat consider testing Dehydration or Allergy #5 #3 First Aid as needed.
Humidity Stress
Position: Thumb pad applied to the radial side of PIP.
Purpose: Detects the bio-stress of extremes or changes of the environmental humidity.
Procedure: Pause Lock the positive Humidity challenge, Format for Local / Humidity / PL / Priority / EndPoint Teat as indicated.
Barometric Stress
Position: Ulnar corner of thumb nail tip into the ulnar side of the ring finger PIP.
Purpose: Displays the bio-stress of extremes or changes of the environmental barometric pressure.
Procedure: Pause Lock the positive Barometric challenge, Format for Local, locations, then EndPoint to treat as indicated.
Hypoxia Stress
Position: Thumb pad onto the ring finger dorsum of 2nd phalanx.
Purpose: Identifies bio-stress anxiety associated with oxygen deprivation as with asthma, pneumonia, emphysema, and blood disorders of Anemia, Lyme Disease and Leukemia.
Procedure: Observe, examine, and test all components of respiration especially diaphragm divisions, and reactions to emotions and allergies. Test for RBC destructive diseases.
Electrical File
Position: Tip of little finger into the center of the palm.
Purpose: Indicates a bio-electrical dysfunction. Format locks in the elements of the Electrical File.
Procedure: Pause Lock the mode and touch the point until strong. To use a micro-current instrument, engage Local / PL / Calculate / count the amplitude / then engage Remote / Calculate / count the frequency / engage Sine wave form / PL and engage Negative polarity / PL / apply current Right to Left
Over Active Tissue
Position: Place thumb and four finger tips on the surface of the assessment area
Purpose: To discover or enter an overactive circuit for processing
Procedure: After Electrical File / PL / touch examination area with the finger tips / PL / Priority / EndPoint
Under Active Tissue
Position: Place the flat hand surface on the area of assessment.
Purpose: To discover or enter an underactive circuit for processing.
Procedure: Electrical File / PL / touch examination area with the flat hand / PL / Priority / EndPoint
Square Wave
Position: Thumb DIP radial crease on the little finger DIP radial crease.
Purpose: Indicates that electronic reproduction of the therapeutic current must be a square wave pattern.
Procedure: Select the square or standard wave form when setting up for electronic therapy.
Sine Wave
Position: Thumb DIP radial crease on the little PIP radial crease.
Purpose: Indicates that electronic reproduction of the therapeutic current must be in a sine wave pattern.
Procedure: Select the sine or gentle wave form when setting up for electronic therapy.
Positive Polarity
Position: Thumb pad on top of the little finger nail.
Purpose: An indicator or format for positive polarity. Touching the skin, or surface electrodes it sedates. Applied with a needle, it will tonify.
Procedure: Select the positive polarity setting when preparing to sedate with surface electrode application.
Negative Polarity
Position: Thumb pad on the dorsum of the little finger PIP.
Purpose: An indicator or format for negative polarity. Applied to the skin, it will tonify internal circuits. Applied with a needle, it will sedate tissue.
Procedure: Select the negative polarity setting when preparing to tonify with surface electronic therapy.
Local / Amplitude
Position: Simultaneously apply the four finger pads to the dorsum of the thumb .
Purpose: In the Electrical File “Local” leads into Calculation of Amplitude for electronic microcurrent.
Procedure: In the Electrical File / Calculate / select the amplitude setting.
Remote / Frequency
Position: Apply the thumb pad surface simultaneously to the dorsum of the four finger nails.
Purpose: In the Electrical File “Remote” leads into Calculation of Frequency for electronic microcurrent.
Procedure: In the Electrical File select the frequency setting plus wave form (Sine) and polarity (Negative).
Gravitational Posture - Sitting
Position: Palm of doctor’s or patient’s hand on the Lesser External Occipital Protuberance, no finger contact.
Purpose: Weakness must correspond with physical posture of sitting to have consistent testing and revealing of information.
Procedure: Patient must be in sitting posture to reveal the optimum processing to an End Point.
Gravitational Posture - Sitting-Reverse Polarity
Position: Posterior of doctor’s hand on the mandible mente
Purpose: A convenience test for the palm of the hand on the Lesser Occipital Tubercle when testing a supine patient.
Procedure: If Positive move the patient to the sitting position for optimum processing to an End Point.
Gravitational Posture - Supine
Position: Palm of doctor’s or patient’s hand on the Greater External Occipital Protuberance (EOP), no finger contact.
Purpose: Weakness must correspond with physical posture of supine to have consistent testing and revealing of information.
Procedure: If Positive move the patient to the supine position for optimum processing to an End Point.
Gravitational Posture - Supine-Reverse Polarity
Position: Posterior of doctor’s hand on the Frontal bone of the skull.
Purpose: A convenience test for the palm of the hand on the Greater Occipital Tubercle when testing a supine patient.
Procedure: If Positive move the patient to the supine position for optimum processing to an End Point.
Gravitational Posture - Left Side Down-LSD
Position: Palm of doctor’s or patient’s hand on the Left ear, no finger contacts.
Purpose: Weakness must correspond with physical posture of Left Side Down to have consistent testing and revealing of information.
Procedure: If Positive move the patient to the LSD posture for optimum processing to an End Point.
Gravitational Posture - Right Side Down-RSD
Position: Palm of doctor’s or patient’s hand on the Right ear, no finger contact.
Purpose: Weakness must correspond with physical posture of Right Side Down to have consistent testing and revealing of information.
Procedure: If Positive move the patient to the RSD posture for optimum processing to an End Point.
Gravitational Posture - Face Down-Prone
Position: Palm of doctor’s or patient’s hand on the frontal bone of the skull.
Purpose: Weakness must correspond with physical gravitational posture
Procedure: If Positive move the patient to the Frontal position for optimum processing to an End Point.
Gravitational Posture - Standing-STA
Position: Palm of doctor’s or patient’s hand on the GV-20 of the skull
Purpose: Weakness must correspond with the physical posture of Standing to have consistent testing and revealing of information.
Procedure: If Positive move the patient to the Standing posture for optimum processing to an End Point.
