Electrical File Modes (2020) Flashcards
Electrical File
Position: Tip of little finger into the center of the palm.
Purpose: Indicates a bio-electrical dysfunction. Format locks in the elements of the Electrical File.
Procedure: Pause Lock the mode and touch the point until strong. To use a micro-current instrument, engage Local / PL / Calculate / count the amplitude / then engage Remote / Calculate / count the frequency / engage Sine wave form / PL and engage Negative polarity / PL / apply current Right to Left
Over Active Tissue
Position: Place thumb and four finger tips on the surface of the assessment area
Purpose: To discover or enter an overactive circuit for processing
Procedure: After Electrical File / PL / touch examination area with the finger tips / PL / Priority / EndPoint
Under Active Tissue
Position: Place the flat hand surface on the area of assessment.
Purpose: To discover or enter an underactive circuit for processing.
Procedure: Electrical File / PL / touch examination area with the flat hand / PL / Priority / EndPoint
Square Wave
Position: Thumb DIP radial crease on the little finger DIP radial crease.
Purpose: Indicates that electronic reproduction of the therapeutic current must be a square wave pattern.
Procedure: Select the square or standard wave form when setting up for electronic therapy.
Sine Wave
Position: Thumb DIP radial crease on the little PIP radial crease.
Purpose: Indicates that electronic reproduction of the therapeutic current must be in a sine wave pattern.
Procedure: Select the sine or gentle wave form when setting up for electronic therapy.
Positive Polarity
Position: Thumb pad on top of the little finger nail.
Purpose: An indicator or format for positive polarity. Touching the skin, or surface electrodes it sedates. Applied with a needle, it will tonify.
Procedure: Select the positive polarity setting when preparing to sedate with surface electrode application.
Negative Polarity
Position: Thumb pad on the dorsum of the little finger PIP.
Purpose: An indicator or format for negative polarity. Applied to the skin, it will tonify internal circuits. Applied with a needle, it will sedate tissue.
Procedure: Select the negative polarity setting when preparing to tonify with surface electronic therapy.
Local / Amplitude
Position: Simultaneously apply the four finger pads to the dorsum of the thumb .
Purpose: In the Electrical File “Local” leads into Calculation of Amplitude for electronic microcurrent.
Procedure: In the Electrical File / Calculate / select the amplitude setting.
Remote / Frequency
Position: Apply the thumb pad surface simultaneously to the dorsum of the four finger nails.
Purpose: In the Electrical File “Remote” leads into Calculation of Frequency for electronic microcurrent.
Procedure: In the Electrical File select the frequency setting plus wave form (Sine) and polarity (Negative).
