miscellaneous

Question 1

Contaminated Runway

Answer 1

…more than 1/8 inch of standing water, snow, or slush,

or when ice is covering more than 25% of the runway width to be used

Question 2

Why do we set the NO SMOKING SIGN to AUTO instead of ON?

Answer 2

AUTO allows the EMER EXIT LT batteries to charge

Question 3

Why do we use CAPT on the CAPT & CAPT/PURS sw?

Answer 3

• So the alert may only be activated from the cockpit.
• If one of the cabin CMD push buttons is pressed, only the cockpit horn sounds for 3 seconds.

Question 4

While conducting the Emergency Evacuation Checklist and an evacuation is required, how should the pilots command the evacuation?

Answer 4

Make a PA announcement and press the EVAC COMMAND pb

Question 5

If the RCDR GND CTL pb is not selected on, how would the CVR work in automatic mode?

Answer 5

• On the ground for the first 5 minutes after electrical power is established
• On the ground after the first engine start
• In flight (whether the engines are running or not)
• On the ground it stops automatically 5 minutes after the last engine shutdown provided the CVR jack is not used.

Question 6

How do we ensure the cabin PAs are recorded on the CVR?

Answer 6

• ACP 3 PA volume knob out & at or above medium allows cabin PAs to be recorded.

Question 7

How many fire extinguishing bottles are there in the cargo extinguishing system?

Answer 7

There is only 1 which has ducting to both FWD and AFT compartments, but the discharge can only be directed to one compartment.

Question 8

What occurs when the EMER EXIT LT sw is turned off?

Answer 8

All lights turn off and the amber EMER EXIT LT OFF light illuminates.

Question 9

EMER EXIT LT sw in ARM

Answer 9

Exit markers and signs come on with…

* loss of normal electrical power or

* loss of DC ESS SHED or

* loss of AC BUS 1

Question 10

T E S T S

Answer 10

T ype of Emergency

E vacuation Required?

S pecial Instructions

T ime remaining to Prepare

S ignal to Brace & Evacuate