Lab 1/19 Material Selection - LiDi vs Zirc - Shade Selection - Communication w Lab

Question 1

Flexural strenght least to most:

Answer 1

feldspatic, leucite based, LiDi, Alumina, Zirconia

Question 2

Light transmission most to least:

Answer 2

feldspatic, leucite based, LiDi, Alumina, Zirconia

Question 3

CTE of the veneering ceramic in relation to that of zirconia:

Answer 3

the same as or slightly lower than

Question 4

Define monolithic:

Answer 4

formed of a single large block of stone

Question 5

Can zirconia be monolithic?

Answer 5

yes

Question 6

Can zirconia be used as a framework design?

Answer 6

yes

Question 7

General trend, as translucency of zirconia inc, this dec:

Answer 7

4-Oint Bending strength (MPa)

Question 8

Higher translucency, Standard zirconia or cubeX^2 Zirconia:

Answer 8

cubeX^2 Zirconia:, 49% vs. 30%

Question 9

Relative flexural strength, highest to lowest, of CubeX^2 zirconia, IPS emax, and standard zirconia

Answer 9

standard zirconia, cubex^2, zirconia, IPS Emax

Question 10

Place in order of increasing translucency: LiDi LT, LiDi HT, Lava Zirconia

Answer 10

Lava Zirconia, LiDi LT, LiDi HT

Question 11

TF? 2 different NDM shades can lead to the same crown shade outcome.

Answer 11

T

Question 12

2 structures that conol man movements:

Answer 12

TMJ, anterior teeth

Question 13

Make this for incisal edge position guide:

Answer 13

custom made incisal guide

Question 14

Core material choices for ACC:

Answer 14

alumina, zironcia

Question 15

Types of LiDi (emax):

Answer 15

press, layered, milled, monolithic

Question 16

Metal-Ceramic alloys:

Answer 16

Au-Pt Noble (yellow), Au Pd Noble (white), high palladium noble (white), base metal (non precious)

Question 17

Non-ceramic alloys:

Answer 17

Au 70% High noble (yellow), Au 40% noble (yellow), Ag-Pd Noble (white), base metal (non-precious)

Question 18

Zirconia as a core material can be used either as:

Answer 18

monolithic or layered

Question 19

Framework designs for metal ceramic restos:

Answer 19

porcelain-lingua;l/ occlusal, metal-lingual/occlusal

Question 20

TF? Letal-lingual/occlusal restos cover the incisal edge of anteriors with metal.

Answer 20

F. about half way up lingual surface with metal

Question 21

Centric contacts should be __mm from metal-porcelain junction.

Answer 21

1.5mm

Question 22

Can layering ceramic be added on to zirconia copoing?

Answer 22

yes, esp for proximal contacts

Question 23

How to tell the difference visually bw fully layered zirc, labial layered zirc, and monolithic zirc?

Answer 23

check

Question 24

More esthetic, monolithic or layered ceramic?

Answer 24

layered

Question 25

TF? NDM guide is req for ACC restos.

Answer 25

T

Question 26

NDM sf:

Answer 26

natural die material

Question 27

NDM guide is used to match:

Answer 27

the existing tooth shade

Question 28

If the outer ceramic material is translucent enough, the shade that will come through will be that of:

Answer 28

the cement shade

Question 29

Define phtohraphy

Answer 29

check