Flows Flashcards
Before Start / Pushback
CA -
1. Set trim after hydraulics are pressurized
FO -
- Hydraulic Panel
- Fuel Panel
- Beacon
- Transponder
- CANC/RCL
Shutdown
CA / FO
CA
When ground power is selected (if available) CA shuts down the engines.
F/D switch - OFF
When chocks are in, release the Parking Brake
After the flow/procedure is complete, the CA will call for the “SHUTDOWN” checklist.
FO
- External PWR (as req)
- Seat Belts Sign - OFF
- Hydraulic Panel
- Fuel Panel
- Anti-ice (if ON AUTO)
- BEACON - OFF
- F/D SW & Terrain switches - OFF
- Transponder - STBY
- STATUS check (to check the status wait approx 3 mins after HYD PRESS SYS L+C+R message is shown)
Secure
FO
- ADIRU - OFF
- Emergency Lights - OFF
- Pack Switches - OFF
After Landing
Initiated when SPEEDBRAKE Lever is moved down and aircraft is clear of the runway.
PF / PM
PF
Moves the SPEEDBRAKE Lever down, and turns OFF WX Radar this triggers the PM flow.
PM
- APU - ON
- Lights
- Engine anti-ice (if req)
- Auto brake - OFF
- FLAPS
- Transponder
Before Taxi
CA and FO -
CA
When ground equipment is clear the CA will call “Flaps ___”, and perform a flight controls check
When flows / procedures are complete the CA will call for the “Before Taxi” checklist.
FO
- APU - OFF (if not req)
- Engine Anti-ice
- Flaps
- CNCL/RCL