Flow Checklists Flashcards
1
Q
After Engine Start (4)
A
- Engine Instruments - Check
- Avionics Bus1 & Bus 2 - ON
- Mixture - Lean
- Environmental Controls - As Needed
2
Q
Taxi (5)
A
- Altitude & Heading - Set
- Transponder - Set
- Recog/Taxi Switch - ON
- Brakes - Release/Check
- Flight Instruments - Check
3
Q
Before Landing (5)
A
- Fuel Selector Valve - BOTH
- Mixture - Set
- Aircraft Lights - As Required (Pulse On)
- Flaps Set _____ Degrees
- Approach - Stabilized (√ FLAPS)
√ - Checklists Complete F - Flight Path Set L - Landing Configuration A - Airspeed Correct P - Power Setting Appropriate S - Sink Rate Normal
4
Q
Before Takeoff (4)
A
- Flaps - Set to 10
- Mixture - Set (RICH)
- Aircraft Lights -
- Uncleared: (NAV ON)
- Cleared: TAXI, LAND, NAV ON - Pitot Heat Switch - As Required
5
Q
After Landing (5)
A
- Pitot Heat Switch - OFF
- Aircraft Lights - As Required:
LAND NAV PULSE - OFF TAXI - ON
- Mixture - Lean
- Flaps - UP
- Elevator Trim - Set to Takeoff
6
Q
Climb (3)
A
- Flaps - UP (After 60KIAS)
- Aircraft Lights - As Required
LAND TAXI NAV - OFF
PULSE - ON - Mixture - Set for Altitude (Lean System)
7
Q
Cruise (4)
A
- Cruise Power - Set
- Mixture - As Required
- Aircraft Lights - PULSE OFF
- Pitot Heat Switch - As Required
8
Q
Before Taxi (9)
A
- Multi-Function Display - Check Databases (Up To Date)
- Fuel Totalizer - Set
- NAV/COM 1&2 - Set
- GPS - Check Signals (1&2)
- Flight Plan - Enter
- Audio Panel - Set
- Flight Instruments - Set/Check
- CDI Softkey - Select NAV Source
- Takeoff Briefing - COMPLETE
9
Q
Descent (13)
A
- Seatbacks - Most Upright Position
- Seats/Seat Belts - Secure/Locked
- GPS - Set
- NAV/COM1&2 - Set
- Altimeters - Set BARO
- CDI Softkey - Select NAV Source
- Pitot Heat - As Required
- Aircraft Lights - As Needed ( PULSE ON )
- Mixture - Set
- Descent Power - Set
- Engine Instruments - Check
- Fuel Selector Valve - BOTH
- Approach Brief - Complete