Facility Design, Layout, And Org. Flashcards
The ____________ must account for the needs of the athletic programs or athletes and the staff in order for the layout to be most efficient.
Design
What should the committee consist of when it comes to a new facility design process?
Contractor, architect, designers, lawyers, strength coach etc.
What are the 4 design phases when it comes to a new facility?
Predesign phase
Design phase
Construction phase
Preoperation phase
The _______________ is the first step in building a new facility. Should consist of a needs analysis, feasibility study, and master plan formation.
Predesign phase
The ___________ is a step in which the design and experts collaborate and determeine the needs of the athletic program.
Needs analysis
The Second part of the predesign phase is called a _____________. Which analyze strengths, weaknesses, opportunities and threats.
Feasibility study
The ______________________ is the general plan or all phases of the new facility. Should include the building and construction plan, facility design, budget information, and an operational plan to act on once the facility is actually complete.
Master Plan
The __________________ is the second phase in the process of building a new facility. Finalize the design committee, designers need to work closely with the architect to produce a blueprint of the facility.
Design Phase
The longest phase of the process___________________. The committee needs to continually refer to the master plan to ensure that the project is on track with regard to the established goals and design.
Construction Phase
The last phase, ________________, it is important to include a plan for staff development as well.
Preoperation Phase
With either a ramp or a wheelchair lift for any change in height exceeding 0.5 inches. A ramp should run _______ for every 1 inch rise.
12inches
The ceiling height recommendation should be?
12 to 14 feet
Ideally, weightlifting plateforms should have a middle portion made of __________ and outer sections made of ____________.
Wood and Rubber
The facility’s lighting should include articulate and natural lighting. The lights should be between ____ and _____ lumens, depending on the height of the ceilings and the amount of natural light.
50 and 100
Most sources indicate that optimal temp. Is anywhere between ______ and _____ range. Operation is optimal in the ____ to ____
68 to 78
72 to 78 deg.