Communications

Question 1

cockpit indications of incoming cabin or ground call

Answer 1

GROUND Pilots call button pushed(external Power receptacle panel) chime sounds in cockpit and MECH call light illuminates on overhead panel

CABIN The ATTND CALL light illuminates and chime sounds in cockpit with flight attendant calls the pilots from a cabin attendant station

Pushing the CALL RESET button extinguishes the ATTND CALL and the MECH CALL switch-lights

Question 2

TFR switch on the VHF

Answer 2

push transfers frequencies active to standby

Question 3

How to activate and deactivate oxygen mask microphone

Answer 3

boom mike automatically connects to comm system when mask is stowed and reset

Mask mike automatically connects to the comm when mask is out of stowage box

After doors are shut pushing the test/reset switch will stop the flow of oxygen to the mask, reset the microphone from mask to boom and retract oxy on flag

Question 4

which radio system available for SELCAL

Answer 4

VHF and HF C and Chime (CAWS)

Question 5

who can communicate on the flight inter phone

Answer 5

external power panel. E/E , flight crew

Question 6

Location and purpose of the maintenance inter phone system

Answer 6

Maint inter phone switch amber

ON- Push switch light to activate all service inter phone jacks throughout the airplane

Question 7

PA can be made with, What is the PA switch light

Answer 7

boom mic
handheld mic
mask interphones
service interphone handset on aft pedestal the PA switch on the overhead panel must be selected on

PA on switch light push to connect the handset to the PA system when handset removed from hanger

Audio Control panel PA button push - When the PA button is held PA transmissions can be made with either boom or oxygen mask

PA has priority over passenger entertainment system and announcements from any cabin station

Question 8

what number is communications info

Answer 8

5 vol 2

Question 9

CVR

Answer 9

no crew action automatic
parking brake set can erase 2 hours
status light illuminates for successful self test of all input channels does not illuminate if system fault

Question 10

Ident switch on audio panel

Answer 10

voice and coded id tones of the NAV1/2 or ADF 1/2 receivers push again for voice reception without ID tones

Question 11

how ARINC com address and reporting messages are received and transmitted

Answer 11

vhf 3 in data mode
controlled by the MCDU data entered manually or automatic
ACARS up-linked messages are displayed on the MCDU screen or printed on the multi-function printer