Checklists Flashcards
List the before start checklist down to the briefing
Inspections and security = complete
Park brake = set
Thrust levers = idle
Mcdu (initial) = set and checked
QNH = set and cross checked
LFE panel = checked
List the before start checklist once a load sheet has been received and before start has been approved
Fuel quantity = checked
MCDU (perf) = set
Speed selector = manual
PFD = TOGA
Trim panel = set / 0 / 0
List the before start checklist once start has been approved
Mobile device = flight mode on
Doors and windows = closed
Cockpit door = closed/locked
Hyd pumps = as req
Beacon = on
Signs = on
Steering = off
Transponder = alt on
List the after start and pre taxi checklist
Autobrake = RTO
Flight controls = checked
Slats/flaps = set “X” and checked
APU = as req
Ground equipment and personnel = removed and clear
List the taxi checklist for a two engined taxi
Taxi lights = on
Final load sheet = received
Vital data review = as req
Cabin report = received
Sterile light = on
List the taxi checklist for a single engine taxi
Taxi lights = on
Final load sheet = received
Second engine = started
Hyd pumps = auto
APU = as req
Vital data review = as req
Cabin report = received
Sterile light = on
List the after takeoff checklist
Landing gear = up
Slats/flaps = 0
Thrust trading = as req
Air cond and press = checked
APU = as req
Once standard set:
Altimeters = STD set and cross checked
List the descent checklist
MCDU = set
Minima = set
Steep approach = as req
FMA source = to PF
List the approach checklist
Altimeter = set and cross checked
Speed selector = manual
Autobrake = set
Lights = on
Signs = set
25nm from destination
Approach aids = set and cross checked
Fuel panel = set
List the before landing checklist for a steep approach
Cabin report = received
Landing gear = down
Missed approach data = set
Slats/flaps = full
Steep approach = green
Nose light = on
List the landing checklist for a normal approach
Cabin report = received
Landing gear = down
Missed approach data = set
Slats/flaps = LDG set
Nose light = on
List the shutdown checklist
Park brake = set/temp
Transponder = stby
N1 = off
Hyd panel = set
Beacom = off
Signs and sterile light = off
Mobile device = flight mode off
Tech log = to complete