05 - Communications Flashcards

1
Q

COMMUNICATIONS
1. What does selecting a radio transmitter switch do?

A

They select which radio transmitter is active and automatically enable reception on the same radio

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

COMMUNICATIONS

  1. What is the purpose of the ALT-NORM switch on the ACP?
A
  • NORM allows for normal operation of the ACP
  • ALT allows for alternate operation (degraded mode) in the event of an ACP panel malfunction
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q
  1. What is the purpose of the VHF TEST switch?
A

It removes the automatic squelch feature, permitting reception of background noise and thereby testing receiver operation.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q
  1. What does the white offside tuning light indicate on the RTP?
A

A transceiver other than the onside VHF is selected

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q
  1. What is the indication of a radio failure?
A

The two frequency indicators show “FAIL”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q
  1. What is the indication of an RTP failure?
A

The frequency indicators show “PANEL FAIL”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q
  1. Which switch is used to key transmission over the selected transmitter?
A

The PTT switch on each hand mic
a headset boom mic has multiple PTTs for transmission;
One on each side of the glare shield, one on each control wheel

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q
  1. What is the purpose of the PA hand mic on the aft electronic panel?
A

It is only used to make PAs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q
  1. What precautions, if any, should be taken when keying an HF radio on the ground?
A

Warning! Do not key the HF radio while the A/C is being fueled/defueled.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q
  1. How is an incoming SELCAL indicated?
A

The white call (C) light illuminated on the ACP and a chime sounds

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q
  1. How are the MEDLINK headset jacks controlled?
A

The observer’s ACP (ACP 3)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q
  1. What is the purpose of the service interphone switch on the aft overhead panel?
A

It provides intercommunication between the Flight Deck, Flight Attendants, and Ground Personnel

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q
  1. How are incoming calls from the passenger cabin handsets indicated?
A

When 2 is pressed on a cabin handset, it sounds a chime and illuminates the CABIN call light on the ACP

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q
  1. What does the GRD CALL switch do when pushed?
A

It sounds a horn in the nose wheel well

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q
  1. What does the ATTEND switch do when pushed?
A

Pushing the ATTEND switch sounds a two-tone chime in the Passenger Cabin and illuminates both pink Master Call lights in the cabin

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q
  1. In what order of radio selection does the Datalink Communication System attempt data transmission?
A

VHF
SATCOM
HF