Zone Inspections

Question 1

How often is each space on the ship required to be visually inspected?

Answer 1

Quarterly

Question 2

Who is responsible for designating zones, boundaries, and spaces within the zone in support of the program?

Answer 2

DCA

Question 3

If a discrepancy cannot be corrected within 5 working days, what action must take place?

Answer 3

Work Candidate entered in the CSMP

Question 4

Zone inspections should be conducted in conjunction with which program when possible?

Answer 4

Division in the Spot Light

Question 5

Who must all ZIDL’s be turned in to following inspections, and within what timeframe?

Answer 5

To the 3MC within 24 Hrs

Question 6

List three discrepancies that result in an automatic “Unsat” score on a zone inspection.

Answer 6

1. Major Safety Violation
2. Signs of severe exfoliation or rust buildup
3. Gear adrift with the possibility of causing personnel or equipment damage

Question 7

After ZIDLs are turned into the 3MC, what is the workflow?

Answer 7

Reports go to XO, then CO for approval. Safety discrepancies are copied to the safety officer. Following review by the CO, they are sent to DH’s for correction.

Question 8

Safety and Damage Control discrepancies should be tracked in what document?

Answer 8

8 O’Clock Reports

Question 9

When should “Unsat” discrepancies be corrected, and if unable, who does that get reported to?

Answer 9

24 hours, or else reported to the XO and 3MC

Question 10

How long must ZIDLs be maintained?

Answer 10

24 months