Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

Lassen Quals > TAGOUT Test > Flashcards

TAGOUT Test Flashcards

1
Q

The authorizing officer:
A. A commissioned officer designated in writing by the XO.
B. The watch/duty officer for propulsion plant tag-outs.
C. Responsible for the administration for their cognizant tag-out log.

A

B & C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

When authorizing tags to be posted, Authorizing officer shall ensure __.

A

Logs serial number is added to the block of caution or danger tags

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What is the color of a Caution Tag?

A

Yellow

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Each Tag-out log shall include:

A

Index sheets
Active TORS
Instrument Log Sheets

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

After each tag is posted the person posting the tag shall __.

A

Sign the tag then initial the TORS

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

After the authorizing officer has checked the tags and TORS for completeness and accuracy, the authorizing officer shall __.

A

Sign the tags and TORS

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

A locking device installed on a valve that is to be tagged shut is a violation of the TUMS.(T/F)

A

False

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

When the prescribed position or condition for an item is Fuses Removed then __.

A

Removable fuse holders/carriages shall also be removed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Lanyard locking clip devices are acceptable for use as locking devices for tag-outs.(T/F)

A

False

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What is the correct procedure for second checking tag-outs?

A

The second checker will perform an independent check of the posted tags

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

For checking a Caution Tag on a component the checker shall ensure the amplifying instructions on the tag match __.

A

The appropriate block on the TORS

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

The person assigned to post tags shall ___ and ___.

A

Ensure each component is in the position/condition specified on the tag and TORS
Ensure the authorizing officer had given permission for repositioning the component

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Electrical breakers with remote operating capabilities shall be __.

A

Tagged at the breaker and at all remote operating stations

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

After checking each component the second Checker shall __.

A

Sign the applicable block on the tag and initial the TORS

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

IAW the TUMS, the department head shall ensure audits are performed __.

A

Every 2 weeks

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

The authorizing officer shall specify the __ after the tag has been removed in block 19 of the TORS.

A

Desired position or condition of the tagged item

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

Preparers and reviewers should use __ to determine the adequacy of all tag-out actions.

A

System diagrams and circuit diagrams

18
Q

When verifying valve position the second checker is allowed to turn the valve in the open position.(T/F)

A

False

19
Q

When performing missing tag actions the authorizing officer shall __.

A

Indicate tag was missing using block 19 through 20b on the TORS

20
Q

Operation of switches and valves are authorized during routine tag-out audits.(T/F)

A

False

21
Q

The duties of the RA (witness) include:

A

Signs TORS associated with RA work
Witness or verifies checking of the posted tags, signed tags and initial TORS
Acts as the authorizing officer for RA tag-outs

22
Q

When posting tag-outs for electrical safety it is permissible to post tags on electrical panel covers(T/F)

A

True

23
Q

__ is used to as a precautionary measure to provide temporary special insructions or to indicate that unusual action must be exercised to operate equipment.

A

Caution Tag

24
Q

What is the color of a Danger Tag?

A

Red

25
Q

Work shall not be permitted to start until __ have determined that plant/system conditions are adequate to begin work.

A

Authorizing officer

26
Q

You are about to hang a tag on a component and the reads “1FM-V445”, but the Danger Tag component ID block reads “1FM-V445 7-15-4”. Is it acceptable to hang this tag?

A

No

27
Q

You are about to hang a tag on a valve and you find there is a string hanging on the valve. What do you do?

A

Report back to the authorizing officer

28
Q

You are the 2nd petty officer for a tag-out line item, what is the purpose of your review?

A

Determine the adequacy and accuracy of the isolation

29
Q

A WAF cannot be opened and work authorized prior to the tag-out line item being verified hung?

A

True

30
Q

You are conducting a tag-out audit and find a tag lying on the ground. The appropriate action for you to take is?

A

Take the tag directly to the authorizing officer/duty officer and report your finding.

31
Q

The Assistant authorizing officer(AAO) plays what role in authorizing a tag-out?

A

Provides the accuracy and adequacy check for the tag-out line item

32
Q

When repair activity representative has signed for a Tag-out line item to be hung, are they required to sign for clearance of the line item?

A

Yes

33
Q

You are the 2nd checker on a tag-out line item that has been approved by an authorizing officer and a repair activity representative. Who should accompany you when you go around verifying the tags?

A

The repair activity representative

34
Q

You have been given 5 tags to hang as the 1st checker. When do you sign the tags?

A

After verifying the components position and attaching the tag

35
Q

What is the sole purpose of a tag-out?

A

To protect personnel and equipment

36
Q

What instruction governs the tag-out process?

A

Tag-out Users Manual(TUM)

37
Q

When in the shipyard environment, if you are opening a WAF which affects ship’s list, trim, stability, buoyancy or water tight integrity, who must concur on the WAF prior to opening it?

A

The ship’s safety officer

38
Q

When attaching a tag to a valve, where should the tag be located?

A

In a conspicuous place so that a person trying to operate the valve will see it before operating the component

39
Q

Which of the following are acceptable references to use in developing a tag-out line item?

A

Technical Manuals, Verified Generated Drawings, NAVSEA/NAVAIR Drawings

40
Q

What is the purpose of the TUMS?

A

Provide for personnel/ship safety and prevent damage to equipment

Lassen Quals (21 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions