Stalling

Question 1

BCC

Answer 1

Brief, configure, checks

Configure - set ASEL higher.

Question 2

SSR subsequent actions

Answer 2

Post occurrence checklist
FRC post stalling checklist

Question 3

What is the green circle speed?

Answer 3

Speed for best lift-to-drag ratio. Best for all engine out glide

Do not operate below without good reason, including performing ‘stall’ trg

Question 4

Clean stall. Thrust, speed etc

Answer 4

55% N1. 150KIAS
Select idle 30deg prior to rollout

Question 5

Approach configuration stall thrust, speed etc

Answer 5

72% N1, 140KIAS
Rollout, flap 3, then idle.

Question 6

SNCS

Answer 6

Speed, Nose attitude, Controls, SWPS

Question 7

Phenom SSR

Answer 7

AP DISC - Disconnect (red button)
Reduce pitch and set TOGA
Wings level
Maintain config
Safe vector - For high alt this may be down

Question 8

Post occurrence checklist

Answer 8

Altitude PF - Gain maintain SALT or safe/cleared level
Airframe PF PM - Configuration, anti icing and TCAS A/R
Airspace PF PM - Current position/nearest airfield

Question 9

Manoeuvre stall. Thrust, speed etc

Answer 9

55% N1. 150KIAS
Once established in turn idle.
First 90 as lookout
Increase AoB and backpressure

Question 10

AAA

Answer 10

Altitude - Cleared/safe flight level
Airframe - Configuration, anti-ice, TCAS
Airspace - Current position, nearest airfield

Question 11

HASELL

Answer 11

Height - Sufficient to recover, not above max height for configuration and to remain VMC
Location - Active airfields
Built up areas
Controlled airspace
Danger areas

Question 12

Location - ABCD

Answer 12

Active airfields
Built up areas
Controlled airspace
Danger areas