OPS 26-0 Operations for High-Rise and Standpipe Equipped Buildings

Question 1

Type of standpipe designed for fire department operations. This class has a 2 1/2 discharge outlet designed to deliver high volume water when used with 2 1/2 hose.
A. Class I
B. Class II
C. Class III
D. Class IV

Answer 1

A. Class I

Question 2

Type of standpipe designed specifically for occupant use. This class has a 1 1/2 discharge outlet and single jacketed hose used for occupant use, However this class of standpipes in Omaha have been required to remove the hose.
A. Class I
B. Class II
C. Class III
D. Class IV

Answer 2

B. Class II

Question 3

Type of standpipe is a combination of classes. This class has a 2 1/2 and 1 1/2 discharge outlet. A single 2 1/2 with a 1 1/2 reducer
A. Class I
B. Class II
C. Class III
D. Class IV

Answer 3

C. Class III

Question 4

Class I and Class III standpipe systems are required to deliver a rated flow of ____ gpm, and have the ability to supply two 2 1/2 ich lines per riser.
A. 200
B. 400
C. 500
D. 1000

Answer 4

C. 500

Question 5

Stand pipes older than 1993 require a minimum of ____ psi.
A. 30
B. 100
C. 65
D. 500

Answer 5

C. 65

Question 6

Stand pipes newer than 1993 require a minimum of ____ psi.
A. 30
B. 100
C. 65
D. 500

Answer 6

B. 100

Question 7

What is the primary attack load out for a stand pipe operation high rise fire?
A. two 2 1/2 lines with fog nozzle
B. two 1 3/4 lines with smooth bore
C. one 2 1/2 line with a fog nozzle
D. HVAP 2 1/2 line with a 1 1/8” smooth-bore nozzle

Answer 7

D. HVAP 2 1/2 line with a 1 1/8” smooth-bore nozzle
flowing 266gpm at 50 psi

Question 8

What is the max pressure that an FAE can pump into a standpipe discharge?
A. 100 psi
B. 65 psi
C. 200 psi
D. 120 psi

Answer 8

C. 200 psi
(unless they know that particular system is designe for higher pressures)

Question 9

Climbing 10 or more stories what can you do?
A. Open turnout coat, remove gloves/hood and place in pockets
B. Remove SCBA and turnout coat entirely
C. Don SCBA with out turnout coat and place coat over SCBA
D. Clip helmet onto SCBA harness

Answer 9

A. Open turnout coat, remove gloves/hood and place in pockets
(20-40 +)
Remove SCBA and turnout coat entirely, Don SCBA with out turnout coat and place coat over SCBA, Clip helmet onto SCBA harness, place HVAP hose pack on top of coat/SCBA harness