MT 1

Question 1

Holding page on MCDU

Answer 1

Nav, Hold, enter speed, enter inbound time (it’ll change quad entry automatically), enter distance (it’ll adjust the leg time) apply then check MFD, then confirm activate. Then add EFC time: Nav, Hold, you’ll see new things teardrop etc. To Exit hold hit Exit. Let them know when you’re in the hold

Question 2

VAPP with QRH

Answer 2

Chart PD 30-2.
Perf Landing
Enter temp and winds
What flap?
Get landing weight too
Enter speeds on the next button on the bottom right
Get min landing distance from the release and notice the HW/TW component.

Question 3

Jammed Control Column Pitch

Answer 3

ELEVATOR DISCONNECT HANDLE ……………………. PULL

Question 4

Jammed Control Column Roll

Answer 4

AILERON DISCONNECT HANDLE ………………………. PULL

Question 5

Rudder Jam

Answer 5

If pedal is jammed the rudder remains active.

If PCU is jammed, the rudder will be hydraulically locked at current position and control thru ailerons and spoilers

Question 6

Roll or Yaw Trim Runaway

Answer 6

AP / TRIM DISC Button……………………. PRESS AND HOLD

Question 7

Pitch Trim Runaway

Answer 7

AP / TRIM DISC Button……………………. PRESS AND HOLD

PITCH TRIM SYS 1 & 2 CUTOUT BUTTONS …….PUSH IN

Question 8

Crossing restrictions: descend to cross one mile west of SHINE at and maintain 4000

Answer 8

NAV
Fix info
Type point
Enter / and distance
Go back to FPl and add altitude

Question 9

Rnav approach

Answer 9

Look at profile

Question 10

ILS approach

Answer 10

Look at profile

Question 11

Missed approach

Answer 11

Look at profile