Microbial Control Methods Flashcards
Physical Methods
-Heat >dry >moist -Radiation -Filtration
Heat: Dry
- dry oven: (sterilization); 600 minutes, 121 degrees Celsius
- incineration: (sterilization); 1500 degrees F/ 815 degrees Celsius
- Dry heat sterilization- 150- 180 degrees C (302-356 Degrees F) for 2-4 hours
- Bunsen burner- 1500 Degrees C (2700 Degrees F) for 8 seconds
- Bacti-cinerator- (infrared sterilizer) 1500 Degrees F for 8 seconds
Heat: Moist
- Autoclave: Steam under pressure (sterilization) 15 minutes at 121 Degrees Celsius (15 pounds of pressure); kills endospores
- Boiling water (disinfection) 30 minutes, kills non-spore forming pathogens; 100 Degrees C (121 Degrees F); 30 minutes kills vegetative pathogens
Mechanical removal: Filtration
- Air (disinfection) (HEPA filter)
- Liquid (sterilization)
- method used to sterilize heat sensitive liquids
- culture media, antibiotics, vaccines, enzymes
- solution is passed through a membrane with pores so small that bacteria cannot pass through
- resultant solution is sterile
Chemical Methods
-Gases (both sterilization and disinfection)
>Ethylene oxide
-Liquids
>Animate- Antisepsis (chemicals applied to body surface to destroy or inhibit vegetative pathogens)
>inanimate- (both sterilization and disinfection)
Chemical Sensitivity Testing
- Phenol Coefficient compares the bactericidal property of a disinfectant to phenol
- Test disinfectant and loopfull of bacteria are mixed together for a period of time, then cultured and incubated to determine if the disinfectant killed the bacteria
- Results are compared to phenol (same organisms and time)
- Also used to determine what concentration of disinfectant should be used
Radiation
- ionizing- x-ray, cathode, gamma (sterilization)
- nonionizing- UV (disinfection)
Radiation: Nonionizing: UV Light
- has limited sterilizing power because of poor penetration into most materials
- generally used in irradiation of air in certain areas
- used in operating rooms and tuberculosis labs
Radiation: Ionizing
- e.g. Gamma radiation: source of cobalt 60 has greater energy than U.V. light, therefore more effective
- used mainly in industrial facilities
- used for sterilization of disposable plastic syringes, gloves, specimens, containers and Petri dishes
Heat: Dry: Dry Oven
(sterilization)
- 600 minutes
- 121 Degrees Celsius
> Bunsen Burner: 1500 Degrees Celsius (2700 Degrees F) for 8 seconds
Heat: Dry: Incineration
(sterilization)
-1500 Degrees F/ 815 Degrees C
> Bacti-cinerator: (infrared sterilizer)
-1500 Degrees F for 8 seconds
Dry Heat Sterilization
150-180 Degrees C (302-356 Degrees F) for 2 to 4 hours
Heat: Dry: Bunsen Burner
1500 Degrees C (2700 Degrees F) for 8 seconds
Heat: Dry: Bacti-cinerator
(infrared sterilizer)
-1500 Degrees F for 8 seconds
Heat: Moist: Autoclave
(sterilization)
- steam under pressure
- 15 minutes
- 121 Degrees C
- 15 psi
- kills endospores