LOQM

Question 1

What is the NSTM for L/O?

Answer 1

NSTM 262

Question 2

What is the NSTM for Hydraulic Oil?

Answer 2

NSTM 245

Question 3

What types of oil do we use?

Answer 3

• 23699

- 2190TEP

Question 4

What are the sampling requirements for L/O?

Answer 4

• Within 24 hours prior to start.
• Daily while operating.
• Prior to transfer.
• When unusual operating conditions exist.
• After an equipment casualty.
• Test purifier discharge 30 minutes after starting and at least once every four hours.

Question 5

What is the reference for L/O?

Answer 5

NSTM 626

Question 6

What procedure is used when taking a L/O sample?

Answer 6

PMS Card 2000 R-1, R-2W.

Question 7

What is the reference for Hydraulic Oil?

Answer 7

NSTM 245

Question 8

What procedure is used when taking H/O sample?

Answer 8

2451 R-1W

Question 9

What does TEP stand for?

Answer 9

Turbine Extreme Pressure

Question 10

What is the criteria for the L/O sample?

Answer 10

Clear and Bright

Question 11

What if the MRG L/O sample is UNSAT?

Answer 11

Source of contamination must be identified and L/O purified within 48 hours.
If source is not found within 48 hours, equipment must be secured.
If equipment must be operated CO’s permission is required and a DFS must be submitted.

Question 12

What equipment has online purification L/O?

Answer 12

MRG

CRP

Question 13

What equipment has offline purification L/O?

Answer 13

Line Shaft Bearings
LPACs
HPACs

Question 14

What are the BS&W limitations for offline purification?

Answer 14

0.4% warning conditions

Question 15

What are the BS&W standards for CPP?

Answer 15

Performed weekly

0.4% purify as many hours a day as possible, submit tech assist, major contamination of oil.