Jason Dion - CompTIA A+ 1001 Exam Prep #03 Flashcards
Which RAID solution will provide the BEST speed and redundancy for a backup and disaster recovery server?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 10
D. RAID 10
A workstation in Dion Training’s conference room is experiencing an issue when trying to boot into Windows. When the workstation is powered on, the workstation is booting up into Kali Linux instead of Windows 10. The workstation is in a closed wooden cabinet under a large television. The technician shutdown the workstation, opened the case, and verified that the memory modules and cables are properly connected. There is only one hard drive installed in the workstation, but the technician does observe an 8GB USB thumb drive connected to a rear USB 3.0 port. Which of the following is the MOST likely reason for the workstation booting into Kali Linux instead of Windows?
A. The boot order of the devices is incorrect
B. The workstation is overheating
C. The workstation’s hard drive is failing
D. There is a mix of DDR3 and DDR4 modules installed
A. The boot order of the devices is incorrect
A penetration tester wants to build a workstation that will be used to brute force hash digests. Which of the following is the BEST option to ensure sufficient power and speed to crack them?
A. 7200 RPM HDD
B. Integrated GPU
C. Dedicated GPU
D. Multi-core CPU
C. Dedicated GPU
You have connected your laptop to the network using a CAT 5e cable but received an IP address of 169.254.13.52 and cannot connect to www.DionTraining.com. What is most likely the cause of this issue?
A. Duplicate IP address
B. DHCP failure
C. Failed DNS resolution
D. Poisoned ARP cache
B. DHCP failure
(This is a simulated PBQ. If you had this question on the real exam, you would be asked to drag-and-drop a label with the component’s name onto the proper location on the port cluster.)
Image of the back of a motherboard and its ports.
Using the image above, which of the following correctly indicates the port labeled as C?
A. IBM PS/2 Keyboard Port ([purple)
B. USB 2.0
C. S/PDIF (Sony/Philips Digital Interface)
D. HDMI
E. VGA
F. DVI-D
G. USB 3.0
H. IEEE 1394 Port/Firewire
I. GbE (Gigabit Ethernet) LAN/RJ-45/Ethernet
J. DisplayPort
K. Analog 7.1 Surround (Blue) Line-in, (Green) Front speakers / Headphones, (Pink) Mic
(Orange) Center/Sub, (Black) Rear Speakers, (White/Grey) Side Speakers)
C. S/PDIF (Sony/Philips Digital Interface)
You are building a new server and want to ensure that its memory can allow the server to continue working even if there is an issue that corrupts data held within the memory modules. Which of the following types of memory should you select for the server?
A. Dual-channel
B. Non-parity
C. Single-channel
D. ECC
D. ECC
What RAID level requires at least three hard disks to operate?
A. RAID 0
B. RAID 5
C. RAID 1
D. RAID 10
B. RAID 5
What describes how many times the image on the monitor changes per second?
A. Refresh rate
B. Aspect ratio
C. Frame rate
D. Resolution
A. Refresh rate
Which of the following is categorized as an APIPA address?
A. 172.30.15.12
B. 169.254.12.64
C. 192.168.1.123
D. 8.8.8.8
B. 169.254.12.64
Any address from 169.254.1.0 to 169.254.254.255 is considered an APIPA address.
You are building a Desktop PC for a newly hired employee at Dion Training. The computer’s motherboard doesn’t have a wireless network adapter integrated into it, so you need to purchase an expansion card to provide this functionality. Which of the following motherboard connections will most likely be used to connect the wireless network adapter card?
A. PCIe x1
B. PCIe x16
C. AGP
D. eSATA
A. PCIe x1
A user wants to print 2 copies of a 3-page report at once. The user would like the pages to come out of the printer in the order of pages 1, 2, 3, 1, 2, 3 instead of pages 1, 1, 2, 2, 3, 3. What printer setting should the user enable for this print job to achieve this result?
A. Collate
B. Duplex
C. Transparency
D. Orientation
A. Collate
Susan, a computer technician, received a complaint from a client about an issue with their laptop. Based on the symptoms observed, she believes that there is an issue with the laptop’s memory. Which of the following symptoms was MOST likely observed during their troubleshooting?
A. Distended capacitor
B. POST code beeps
C. Continuous reboots
D. Incorrect time in the BIOS
C. Continuous reboots
A user wants to run Windows 10 on their new Macbook without dual booting with Boot Camp. What software would allow the user to run Windows inside of OS X by using a Type 2 hypervisor?
A. Red Hat Enterprise Virtualization (RHEV)
B. Virtual Box
C. Vmware ESXi
D. Hyper-V
B. Virtual Box
You have just finished building a Windows server, installing its operating system, updating its security patches, formatting a dedicated data partition, and creating accounts for all of the company’s employees. What is the next thing that must be configured to provide users with the ability to access large multifunction devices across the network?
A. RAID storage
B. Audit logging
C. File sharing
D. Print server
D. Print server
You have just finished installing a virtual machine on a workstation. Your boss asks you to install a second virtual machine with the same settings. To save time, which of the following functions should you use?
A. Secure Copy
B. Shadow Copy
C. Cloning
D. Migration
C. Cloning
Which of the following is an APIPA or link-local address?
A. 127.0.0.1
B. 169.254.64.23
C. 33.52.7.83
D. 192.168.1.34
B. 169.254.64.23
What type of services can allow you to get more storage and more resources added to the cloud as fast as possible?
A. Metered services
B. Rapid elasticity
C. Measure services
D. Resource pooling
B. Rapid elasticity
While troubleshooting a switch at the Dion Training offices, you believe that one of the ports on a switch is defective. To prove your hypothesis, which of the following tools should you use?
A. Crimper
B. Punchdown tool
C. Loopback plug
D. Cable tester
C. Loopback plug
Dion Training’s file server uses a RAID 5 for its main data store. Recently, the RAID began flashing from green to yellow. Additionally, an alert was received that stated, “RAID ARRAY DISK1 FAILURE”. Unfortunately, the company no longer has any spare 1 TB, 5400 RPM Seagate drives, so a technician replaces DISK1 with a 1 TB, 7200 RPM Western Digital drive. When the technician attempts to rebuild the array, the drive stays in degraded operation and continues to alert that “RAID ARRAY DISK1 FAILURE” is occurring. What is the most likely cause of this issue?
A. The HDD is incompatible
B. Incorrect SCSI ID set
C. Bad SATA cable
D.The new drive is not formatted as FAT32
A. The HDD is incompatible
You are troubleshooting an issue with multiple workstations that are having network connectivity issues. The network also has two servers connected to the network, but they do not have any connectivity issues. You look at the network configuration of the two servers and notice they are using static IP addresses. Based on what you know so far, what is most likely the cause of the workstation’s network connectivity issue?
A. The internet connection for the network is down
B. The network’s router is current down
C. The wireless network adapter for each workstation was accidentally disabled
D. The workstations are most likely configured to use dynamically assigned IP addresses and DHCP is not working properly
D. The workstations are most likely configured to use dynamically assigned IP addresses and DHCP is not working properly
A workstation is having intermittent issues and continues to receive system errors or freeze. You believe that the problem is being caused by the workstation’s motherboard, not getting the proper amount of power to it, and you want to perform a test to confirm your theory. Which of the following tools should you use to determine if the proper amount of power is being supplied to the motherboard?
A. POST card
B. Cable tester
C. Multimeter
D. Loopback plug
C. Multimeter
Sally just purchased a new iPhone and AirPods to listen to her music. After setting up the new iPhone, she can get online and watch YouTube, but her wireless headphones aren’t working. Which of the following is MOST likely the problem?
A. Cellular is not enabled
B. Bluetooth is not enabled
C. The phone is in airplane mode
D. Wi-Fi is not enabled
B. Bluetooth is not enabled
Which of the following types of encryption should be selected on a SOHO access point if you are running a coffee shop and want all of your customers to be able to join it by default?
A. WEP
B. WPA
C. WPA2
D. Open
D. Open
Tony, a system administrator, set up a printer on John’s workstation. During the setup, Tony was able to print a test page. Later, when John attempted to print a document, an error message was displayed that indicates access was denied to the printer. John tried to restart the printer and workstation, but the same error message is displayed when he attempts to print a document. Which of the following MOST likely caused this issue?
A. The print spooler is hung and must be restarted
B. The printer is offline
C. The printer lacks the memory required to process the document
D. The user lacks adequate security permissions to the printer
D. The user lacks adequate security permissions to the printer
Which of the following hard drive form factors would be connected to your laptop internally using a Micro SATA connection?
A. 1.8”
B. 3.5”
C. M.2
D. 2.5”
A. 1.8”
Which port is used to connect to a POP3 server?
A. 110
B. 443
C. 25
D. 143
A. 110
Which of the following operating systems has the built-in capability to install and run Hyper-V?
A. Windows 7
B. Windows XP
C. Windows 2000
D. Windows 10
D. Windows 10
Both Apple and Samsung have released their own version of contactless mobile payment solutions. For example, Apple Pay allows users to place their iPhone or Apple Watch within an inch of a credit card machine at a store to make a payment. Which of the following wireless technologies do these types of payment systems rely upon?
A. NFC
B. Bluetooth
C. Infrared
D. Wi-Fi
A. NFC
Tim’s laptop was recently upgraded to Windows 11 but is now running more slowly due to the increased memory requirements. He has decided to install some additional RAM to speed up the laptop. Which of the following should he install?
A. VRAM
B. DIMM
C. GDDR5
D. SODIMM
D. SODIMM
What type of cloud model would allow the sharing of resources by multiple organizations to create a service that benefits all of its members?
A. Private Cloud
B. Community Cloud
C. Hybrid Cloud
D. Public Cloud
B. Community Cloud
Which option would you MOST likely use to configure PXE to set up remote imaging on a computer during a deployment?
A. Secure boot configuration
B. Power management configuration
C. BIOS boot option
D. Windows boot menu
C. BIOS boot option
You are trying to select the best device to install to proactively stop outside attackers from reaching your internal network. Which of the following devices would be the BEST for you to select?
A. IDS
B. IPS
C. Syslog server
D. Proxy server
B. IPS
You have been asked to recommend a RAID for use in a video editing workstation. The workstation must be configured to allow the highest speed operation and use 100% of the available drive free space. The workstation has no requirement for redundancy within this configuration. Which configuration do you recommend?
A. RAID 10
B. RAID 0
C. RAID 1
D. RAID 5
B. RAID 0
A customer is complaining that they smell a foul odor coming from their computer. If you open up the PC’s case and look inside, which of the following would you expect to see?
A. Unseated RAM module
B. Distended capacitors
C. Unplugged Molex connector
D. Broken LED light
B. Distended capacitors