Hypodermic Tissue Building

Question 1

Conditions requiring treatment include

Answer 1

Emaciation in the face, neck, and hands

Question 2

Time of application of (hypodermic tissue builder)

Answer 2

After embalming

Question 3

Why isn’t hypodermic tissue building performed before embalming?

Answer 3

Accurate requirements cannot be predetermined

An area of low resistance to the arterial injection is created

Question 4

Embalming may do what to the tissues?

Answer 4

Replace moisture and eliminate signs of emaciation

Question 5

Humectant fluid may be added to the embalming chemical as a what?

Answer 5

An internal tissue builder

Question 6

This is the major fault of hypodermic tissue building

Answer 6

Danger of overfilling

Question 7

Whenever filling similar structures on opposite sides of the face, be aware that….

Answer 7

Overinjection on one side will lead to compensating injection of the other side
Trying to balance the two sides may produce distortion

Question 8

Tissue builder should be injected in _______ quantities

Answer 8

Small

Question 9

Types of syringes

Answer 9

Metal with glass barrel
Glass
Disposable

Question 10

Size in consideration of area to be injected

Answer 10

Mucous membranes

sunken temples

Question 11

Length of needle selected depends upon

Answer 11

the dimensions of the area to be filled

Question 12

Diameter of a needle is also known as the _________

Answer 12

Gauge

Question 13

The higher the ______ the smaller the diameter

Answer 13

Gauge

Question 14

The higher the gauge the _______ the diameter

Answer 14

Smaller

Question 15

The lower the _______ the bigger the diameter

Answer 15

gauge

Question 16

The lower the gauge the ________ the diameter

Answer 16

bigger

Question 17

Larger diameter (lower gauge) is used for

Answer 17

cream fillers

Question 18

Narrow diameters (higher gauge) is used for

Answer 18

Liquid filler

Question 19

Each needle has a wire ____

Answer 19

cleaning guard

Question 20

The tip of the needle is ________ to permit easy entry

Answer 20

angled

Question 21

Why is the tip of the needle angled?

Answer 21

To permit easy entry

Question 22

Types of syringe attachments

Answer 22

Lock type
Screw type
Force type

Question 23

Types of tissue fillers

Answer 23

Massage cream
Mortuary creams
Liquid colloid

Question 24

The needle is placed through the skin and directed to the most _________ point of the area to be filled

Answer 24

Distant

Question 25

The needle is kept as ______ to the skin as possible

Answer 25

Close

Question 26

To avoid puncturing the skin, the free hand is placed on the skin surface to

Answer 26

Estimate the depth of the needle

Question 27

Once the needle is fully inserted under the skin, withdraw it to remove any __________

Answer 27

Subcutaneous tissue which may be blocking the tip

Question 28

Slowly withdraw the needle to the point of entry, then apply

Answer 28

External pressure with fingers

Question 29

Excess filler may be pressed out of the needle puncture before it has

Answer 29

set

Question 30

Dehydration will create

Answer 30

brown holes

Question 31

Possible hidden points of entry of the face

Answer 31

``` Hair regions Nostrils Corners of the mouth Receded parts of the ears Posterior margin of the angle of the jaw ```