Heska Vet IV 2.2 Fluid Pump

Question 1

When draping, which side of the drape faces the patient?

Answer 1

the light side

Question 2

What are the steps to switch between MACRO and MICRO on the Heska Vet IV 2.2 Fluid Pump?

Answer 2

1. Turn the machine off.
2. While holding the SELECT button, press ON/OFF.
3. Release the select button. [SLCT] will appear on the display screen.
4. Press SELECT until MACRO or MICRO indicator is green.
5. Press RUN/HOLD twice.

Question 3

What are the fluid choices on the Heska Vet IV 2.2 Fluid Pump?

Answer 3

electrolyte solutions, glucose containing solutions, total parenteral nutrition (TPN)

Question 4

Can the Heska Vet IV 2.2 Fluid Pump be used to administer whole blood or plasma?

Answer 4

no

Question 5

What is RATE measured on on the Heska Vet IV 2.2 Fluid Pump?

Answer 5

mL/hour

Question 6

What does VTBI indicate on the Heska Vet IV 2.2 Fluid Pump?

Answer 6

volume to be infused

Question 7

What does VI indicate on the Heska Vet IV 2.2 Fluid Pump?

Answer 7

volume infused

Question 8

What does TIME indicate on the Heska Vet IV 2.2 Fluid Pump?

Answer 8

number of hours fluid is to be infused over

Question 9

What are the four infusion mode options on the Heska Vet IV 2.2 Fluid Pump?

Answer 9

macro, micro, 10-P, and TPN

Question 10

What does the SELECT button do on the Heska Vet IV 2.2 Fluid Pump?

Answer 10

toggles through user-definable options

Question 11

What does the CLEAR button do on the Heska Vet IV 2.2 Fluid Pump?

Answer 11

clears selected parameters

Question 12

How do you adjust the RATE on the Heska Vet IV 2.2 Fluid Pump?

Answer 12

With the RATE option selected (the indicator light will be green), adjust using the UP/DOWN arrows

Question 13

How do you adjust the VTBI on the Heska Vet IV 2.2 Fluid Pump?

Answer 13

with the VTBI option selected (the indicator light will be green), adjust using the up/down arrows

Question 14

How do you set the TIME on the Heska Vet IV 2.2 Fluid Pump?

Answer 14

TIME will auto-set when RATE and VTBI are set

Question 15

How do you check time remaining on the Heska Vet I.V. 2.2 Fluid Pump?

Answer 15

press select once

Question 16

How do you check the remaining VTBI on the Heska Vet IV 2.2 fluid pump?

Answer 16

press select twice

Question 17

How do you check the VI on the Heska Vet I.V. 2.2 Fluid Pump?

Answer 17

press select three times

Question 18

How do you adjust settings on the Heska Vet IV 2.2 Fluid Pump?

Answer 18

1. Press RUN/HOLD.
2. Press select until the parameter to be adjusted is displayed.
3. Use the up and down arrows to adjust the setting.
4. Press RUN/HOLD to resume operation.