FLIGHT INSTRUMENTS Flashcards
Which format shows flight plan information such as active waypoints, time and distance to go, and fuel remaining at landing?
A. MAP
B. PLAN
C. CHART
D. ROUTE
D
What is the function of the ADS pushbuttons on the reversion switch panel (RSP)?
A. To switch between automatic dependent surveillance-broadcast (ADS-8) and automatic dependent surveillance-contract (ADS-C)
B. To manually cycle through the air data sources for the left or right primary flight display (PFD)
C. To turn the air data system (ADS) on or off
D. To remove the air data from the display units (DUs)
B
What colour is the data source annunciation on the flight mode annunciator (FMA) when the primary flight display (PFD) is using an alternate air data source that is not the same as the opposite PFD?
A. White
B. Cyan
C. Amber
D. Magenta
A
What is the purpose of the DC auxiliary fuel pumps?
A. To keep the collector tanks full of fuel and slightly pressurized
B. To recirculate fuel from each wing inner tank to the onside wing outer tank
C. To act as main fuel pump for the engine
D. To be the backup pump for the primary AC pump
D
In the following graphic, what does the indicated symbol on the head-up display (HUD) represent?
A. Guidance cue
B. airplane reference
C. Horizon line
D. flare cue
B
The active speed bug digital readout shows above the speed tape in …….. if it is manually set.
A. magenta
B. white
C. green
D. cyan
D
Where is the control located that allows the flight crew to select between indications of indicated airspeed (IAS) or Mach speed?
A. Control tuning panel (CTP)
B. Flight control panel (FCP)
C. Glareshieldpanel
D. Cursor control panel (CCP)
B
If only one primary flight display (PFD) switches to an alternate air data source, what color does the air data smart probe (ADSP) indication show on the PFD?
A. Amber
B. Cyan
C. Magenta
D. White
D
Formats on the multifunction windows are accessed using the multifunction keyboard panel (MKP) and the cursor control panel (CCP). What is an alternate way to access the formats?
A. Flight control panel
B. Glareshield
C. Reversion switch panel
D. Control tuning panel
D
When is EVS powered up
When DC BUS 2 is powered
Where is the control to adjust the brightness of the HUD located?
A. On the combiner unit in the upper portion of the arm
B. On the glareshield
C. There is no DIM/BRT knob; the brightness on the combiner unit adjusts automatically
D. It is a setting on the control tuning panel (CTP) HUD page
B
Select the location of the attitude director indicator (ADI) on the HUD combiner.
Center
Which HUD symbol is shown?
A. Flight path vector (FPV)
B. Non-conformal FPV
C. Caged FPV
D. Flight director (FD) guidance cue
B
Which of the following statements are correct regarding the flight path acceleration cue?
Select three responses.
A. When the flight path acceleration cue is above the flight path vector (FPV) wing, the aircraft is accelerating
B. When the flight path acceleration cue is below the FPV wing, the aircraft is decelerating
C. The flight path acceleration cue is a hollow rectangle of variable height and fixed width. It displays on the FPV left wing
D. The flight path acceleration cue is a right-pointing hollow arrowhead located to the left side of the FPV
A, B and D
What is the highlighted indication on the airspeed scale?
A. Low-speed marker
B. V MIN TRIM
C. Stall marker
D. No fly zone
C
