DISPLAY CONTROL & MANAGEMENT Flashcards
The FULL/HALF pushbutton configures the primary flight display (PFD) to full or half width of a display unit (OU). Where is the FULL/HALF pushbutton located?
A. Multifunction keyboard panel (MKP)
B. Cursor control panel (CCP)
C. Control tuning panel (CTP)
D. Reversion switch panel (RSP)
C
What happens if three display units (DUs) fail?
A. Only the primary flight display (PFD) is shown automatically.
B. The remaining DU will show the PFD and EICAS in a compressed format
adjacent to a multifunction window (MFW).
C. The DISPLAYS knob on the reversion switch panel must be selected to NORM.
D. The DISPLAYS knob on te reversion switch panel must be selected to REV
B
Select the panel that includes the MEM key used to store and select display unit (DU) configurations.
A. Cursor control panel (CCP)
B. Multi function key board panel (MKP)
C. Control tuning panel (CTP)
D. Reversion switch panel (RSP)
B
Select the true statement regarding the cursor.
A. The trackball on the left cursor control panel (CCP) can control either cursor.
B. The pilot and copilot each have a separate cursor.
C. The copilot cursor has three spokes.
D. The pilot cursor has four spokes.
B
What panels can be used to control the cursor
A Cursor Control Panel CCP
B Multifunctional Key Panel MKP
C Control Tuning Panel CTP
D Reversion Switch Panel RSP
A and B
What is the MEM key on the Multifunction Keyboard Panel used for
A To store the current configuration automatically
B to revert to previous configuration
C To recall display Unit Configuration
D To store Display Unit Configuration
C and D
Ground Ops of the display Units avionics with flight compartment or cabin temps in excess of …….. for more then …… is prohibited
40 deg C and 30 min
Flying an approach with published glide path angles greater than ….. degrees is prohibited
Supp 8 - 3.5 -4.5
Supp ? 3.5-4.5
4.5
