Farm Workshop & Machinery Shed

Question 1

building for fabrication, repair and maintenance of tools, implements, equipments and parts of structures and provides a place where tools, supplies and spare parts are stored

Answer 1

Workshop

Question 2

area to protect machinery from weather, theft, vandalism and to allow easy maintenance and adjustment of machines

Answer 2

Machinery Shed

Question 3

substances on farms that are highly flammable or poisonous

Answer 3

Hazardous material

Question 4

The building shall be situated at least ___m from other buildings to reduce fire hazard, to allow for future expansion, and maneuvering and parking of machinery.

Answer 4

45m

Question 5

For the approach aprons, the slope shall be __% - __% away from the building.

Answer 5

3 to 5%

Question 6

When the roof span is __m or less, a beam shall be used. For larger spans or very heavy loads a ___ shall be required.

Answer 6

3m ; truss

Question 7

The minimum clear height from floor to truss shall be at least ___m.

Answer 7

3m

Question 8

For machines higher than 3 m, the height shall be the sum of the machine height plus ___m.

Answer 8

0.3m

Question 9

Roofing materials shall be made of ____.

Answer 9

G.I. sheets

Question 10

Minimum dimension of a doorway shall be __ m high and __ m wide. For bigger
equipment, a clearance of __ m on both sides shall be added.

Answer 10

3m ; 3.7m ; 0.6m

Question 11

The door height shall be provided with a clearance of at least ___ m above the tallest machinery.

Answer 11

0.3m

Question 12

Workbenches shall be at least __m high. The bench width shall be __m and at least __m long. Benches shall be equipped with a large vice and anchored securely.

Answer 12

1m; 0.8m ; 3m;

Question 13

For a welding area, a welding hood with a fan that will move air about ___ - ___ shall be provided.

Answer 13

28 cubic-meter per min to 57 cubic-meter per min

Question 14

If vehicles are to be operated in the shop for a period of time, an exhaust hose through the wall or a small suction fan pulling exhaust through a tube from the exhaust pipe shall be provided. The fan shall be capable of moving air about ____per vehicle through the pipe.

Answer 14

7 cubic-meter per min