EIS Quiz Flashcards
Which Display Management Computer provides information to the FO’s PFD, ND, and the SD?
DMC1
DMC2
DMC3
DMC2
How would you interpret these indications?
The captain’s PFD. ND, and the E/WD have failed.
DMC 2 has failed
DMC 3 has failed
DMC 1 has failed
DMC 1 has failed
Which of the following actions would correct the problem?
Moving the ATT HDG switch to CAPT 3
Moving the AIR DATA switch to CAPT 3
Moving the EIS DMA switch to CAPT 3
Moving the ECAM/ND XFR switch to CAPT 3
Moving the EIS DMA switch to CAPT 3
Which color indicates an item that requires crew awareness but not necessarily crew action?
Red
Amber
Green
White
What color is for immediate crew action?
Amber
Red for immediate
What does a pulsing gree parameter indicate?
An advisory, the parameter is approaching a limit
An advisory, the parameter is out of limits
A mmo, the parameters has a faulty indication
A level 3 failure requiring immediate crew action
An advisory, the parameter is approaching a limit
What is the meaning of the green arrow at the bottom of the STATUS page?
Pushing which key solve this?
There is additional information to be displayed on the STATUS page?
Pushing either CLR pb will display the next portion of the STATUS page
The next portion of the STATUS page is now displayed. Pushing which button on the ECAM control would return the display to the first portion of the STATUS page?
The STS pb
A pulsing white STS message is displayed on the E/WD after engine shutdown at the gate. What does it mean?
It indicates that a message is available for display on the STATUS page.
How do you interpret thes indications?
The captain’s outer DU has failed
DMC 1 has failed
A navigation computer has failed
The captain’s outer DU has failed
Is it still possible for the captain to view the ND?
Yes, by pusing the captain’s PFD/ND XFR pb.
The upper DU has faialed. Is it still possible to display a system page on the lower DU?
Yes, by pushing and holding the appropriate key on the ECAM panel. The E/WD will be temporaririly overridden.
Is it possible to display the ELEC page on the FO’s inner DU?
Yes, by moving the ECAM/ND XFR switch to F/O and pushing the ELEC pb on the ECAM control panel.
Both ECAM screens have failed. Is it possible to display the E/WD?
Yes, by moving the ECAM/ND XFR switch to either CAPT or F/O
