CRJ900 Systems Flight Instruments

Question 1

In the event that a PFD fails, PFD information can be displayed on the MFD by using the

Answer 1

Display Reversionary Panel

Question 2

The Total Air Temperature probe supplies temperature information to the

Answer 2

Air Data Computers

Question 3

Pitot/Static inputs and Total Air Temperature provide raw Air Data information which is converted to digital format though the

Answer 3

Air Data Computers

Question 4

What is the time required to align the AHRS in the MAG mode

Answer 4

30-70 Seconds

Question 5

What is the time required to align the AHRS in DG mode

Answer 5

10-11 Minutes

Question 6

Radio Altitude will be displayed on the PFD below

Answer 6

2500 ft AGL

Question 7

The airspeed trend vector indicates the predicted airspeed in

Answer 7

10 seconds

Question 8

The Mach number will be displayed when the aircraft reaches

Answer 8

.45 Mach

Question 9

The Mach number will be removed when the aircraft reaches

Answer 9

.40 Mach

Question 10

The green line on the airspeed tape indicates

Answer 10

1.27 Vs

Question 11

The skid and slip indicator on the PFD is

Answer 11

A rectangle under the roll pointer

Question 12

Can the integrated standby indicator can display localizer and glide slope information

Answer 12

Yes

Question 13

The standby instrument (ISI) is located

Answer 13

in the center instrument panel between ED1 and ED2

Question 14

The copilots PFD and MFD normally receives air data, attitude, and heading information from

Answer 14

ADC 2 and AHRS 2