CompTIA+901_Mock_3 Flashcards
Which default port is used by the Telnet protocol?
TCP/IP 23
John is a PC technician for an organization that has a computer network with 12 computers. Each contains vital information, so each uses static IP addresses. John just finished troubleshooting a Windows 8.1 computer that could not access the network. He ascertained (correctly) that the computer needed a new network card. He purchased a Plug and Play card and physically installed the card. He then turned on the computer, noting that the network card’s LED link was lit and that there was activity. He then rebooted the computer to Windows and then documented the whole process. Later, his boss tells him that the user is complaining that she cannot access the Internet. Which step of the A+ troubleshooting theory did John forget to perform?
Verify full system functionality
What kind of cables use either a BNC connector or an RJ-45 connector
Network cable
Which component is used to provide those features that are not offered by the motherboard?
Adapter card / Expansion card
Which port is used by default by RDP?
TCP/IP 3389
Which classes of IP address allows highest numbers of hosts per network?
Class A: 16,777,214
Which video standard is not likely to support high-definition 1080p resolution
S-video
Blocking port number 143 will affect communication of which of the following protocols?
TCP/IP IMAP
Which sort of cable carries analog video signal across three separate physical channels?
Component
Which of the following should be used when building a high-end graphics workstation for CAD applications?
- Main memory of 16 GB or more This answer is correct.
2. A PCIe video card with a large amount of memory
Which ports are able to transfer data at the rate of 400Mbps and more? Select all that apply
- USB 2.0
2. FireWire
Which devices are used by microprocessors to prevent it from overheating?
- Fan
2. Heat sink
You work as network administrator for Tech Perfect Inc. The company has a TCP/IP-based network. You want to know the current TCP/IP network configuration settings, DHCP server IP address, and DHCP lease expiration date of your network.
Ipconfig
How many bits are used in an IPv4 address?
32 bits
Which tool is used to join connectors to its cables?
Crimper
A customer wants to control several computers with a single set of input devices. Which of the following solutions should you provide for them?
KVM
Andrew configures a hard disk drive and a serial port on his computer’s BIOS. Where does BIOS save this information?
CMOS
Match the correct RAID type to the correct characteristic(s)
RAID 5
a. Lower cost-per-gigabyte than RAID 1. Uses striping with distributed parity. Highest fault tolerance.This answer is correct. The correct answer is: Lower cost-per-gigabyte than RAID 1. Uses striping with distributed parity. Highest fault tolerance.
2. RAID 0
Selected: c. A loss of a single disk in the stripe set destroys the data on the entire volume. Uses striping.This answer is correct. The correct answer is: A loss of a single disk in the stripe set destroys the data on the entire volume. Uses striping.
3. RAID 1
Selected: b. Uses mirroring
Which of the following would be suitable for 1000 Mb/s networks?
- Category 5e
2. Category 6
You have just set up a network that will use the TCP/IP protocol, and you want client computers to be able to search for and communicate with other computers by using hostnames. Which type of server will help with this?
DNC
Which would benefit the most from the use of dual monitors?
A/V editing workstation
Which type of card should be used to record off-air television programs?
Video capture card
Which network devices moves frames of data between a source and destination based on their MAC addresses?
Switch
Which technology assigns addresses on the 169.254.0.0 network number?
APIPA