Building Automation and Smart Systems Flashcards
What does I0T stand for?
Internet of things
___ ____ ____ descirbes physical objects with sensors, processing ability, software and other technologies that connect and exchange data with other devices and systems over the internet or other communication networks
Internet of Things
There are 2 system signal types what are they?
Low voltage signal via cable
wirelss cellular signal
____ is a family of wired computer networking technolgies commonly used in local area networks, metropolitan area networks and wide area networks
Ethernet
LAN stands for?
Local Area Networks
MAN stands for?
Metropolitan Are Networks
WAN stands for?
Wide Area Networks
These are all qualities of?
Most trusted pathway
hardest to hack
involves cost and coordination of wiring
Ethernet
What does STP stand for?
Shielded Twisted Pair
UTP stands for?
Unshielded Twisted Pair
Waht is opical fiber cable used for?
telephone, internet, cable television signals
What is coaxial cable used for?
resists electronic interference. used for cable TV and radio frequency local area networks
______ voice communication (intercom)
Intra-office
_____ _____ is the cabling connectors and accessories that are used to connect LAN and phone equipment within a commerical building.
Premise Wiring (INTRA)
____ facilitates communication systems beyond local source (INTER)
WAN (Wide area network)
PoE stands for?
Power Over Ethernet
____ _____ _____ describes any of several
standards or ad hoc systems that pass electric power
along with data on twisted-pair Ethernet cabling. This
allows a single cable to provide both data connection
and electrical power to devices such as wireless access
points (WAPs), Internet Protocol (IP) cameras, and voice
over Internet Protocol (VoIP) phones.
Power over Ethernet
The Cloud is similar to the?
Internet of Things
The _____ _____ _____ is equpped with computers that process data to make operational decisions and is routinely installed in office buildings
Supervisory control center
BAS stands for?
Building Automation Systems
Supervisory control center systems are referred to as?
Building Automation Systems
A ____ ____ _____as opposed to an automated system,
manually employs a technique by which an action can be performed
the device being controlled from a remote location
by some intermediate means, such as low-voltage wiring or a
wireless signal. Most commonly an app based program
Remote Control System
What does EMCS stand for?
Energy Management Control Systems
____ ____ ____ ____ turn off equipment that is not in
use, optimize HVAC operation, and cycle electrical loads to limit overall demand.
They can include a security monitoring system. An EMCS requires lighting,
ventilation, and space for raceways.
Energy Management Control Systems
