AnaChem - 2019 Flashcards
1
Q
- What do you call a combination of two or more materials which retain their individual properties and can be separated by physical means.
A. solvents
B. reactions
C. mixtures
D. solutions
A
C. mixtures
2
Q
- A polar solute usually dissolves in a polar solvent and a nonpolar solute usually dissolves in a nonpolar
solvent. This Is
A Hund’s rule
B. Henrys law
C. the solubility rule
D. the “Iike dissolves like’ rule
A
D. the “Iike dissolves like’ rule
2
Q
- What is the molarity of a solution containing 72.9 grams of HCI in enough water to make 500 mL of
solution?
A. 2.0 m/L
B. 4.05 g/L
C. 5.0 m/L
D. 4.05 m/L
A
D. 4.05 m/L
3
Q
- A solution has 3x10-4 copper 2+ content. How much is the copper 2+ content in ppm?
A. 3 ppm
B. 38 ppm
C. 9 ppm
D. 19 ppm
A
D. 19 ppm
3
Q
- Solutions of electrolytes and metals are _____
A. Insulators
B. Polar
C. Negative
D. Conductors
A
D. Conductors
4
Q
- The recommended procedure for preparing a very dilute solution Is not to weigh out a very small mass or
measuring a very small volume of a solution. Instead it IS done by e series of dilutions. A sample of 0.8214
g of KMnO4 (158.04) was dissolved in water and made up to the volume in a 500- ml volumetric flask. A 2.000-rnl sample of this solution was transferred to a 1000-ml volumetric flask and diluted to the with water. Next. 10.00 ml of the diluted solution were transferred to a 250-ml flask and diluted to the mark with water.
What is the concentration (in molarity) of the final solution?
A. 0.1039 M
B. 2.079 x10-5 M
C. 8.316 x 10-7 M
D. None of these
A
C. 8.316 x 10-7 M
4
Q
- How much of a 2.0M stock solution do you need to prepare 50 ml of a 1.0 M solution?
A. 75 ml
B. 30 ml
C. 25 ml
D. 50 ml
A
C. 25 ml
5
Q
- A statement that sums up what you learned from an experiment and states if the hypothesis Is proven or
disproven is called
A. procedure
B. control group
C. hypothesis
D. conclusion
A
D. conclusion
5
Q
- A prediction or a possible explanation to the question or problem which can be tested in an experiment is
called
A. hypothesis
B. procedure
C. graph
D. data
A
A. hypothesis
6
Q
- The number 2.34x10-7 is the scientific notation for _______
A. 234000
B. 23400
C. 23400000
D. 2340000
A
C. 23400000
6
Q
- Express the number 0.051065 to four significant figures
A. 0.051
B. 0.051
C. 0.05106
D. 0.0511
A
C. 0.05106
6
Q
- The volume of a liquid is 20.5 mL. Which of the following sets of measurement represents the value
with good accuracy?
A. 19.2 mL, 19.3 mL, 18.8 mL, 18.6 mL
B. 18.9 mL, 19.0 mL, 19.2 mL, 18.8 mL
C. 18.6 mL, 17.8 mL, 19.6 mL, 17.2 mL
D. 20.2 mL, 20.5 mL, 20.3 mL, 20.1 mL
A
D. 20.2 mL, 20.5 mL, 20.3 mL, 20.1 mL
7
Q
- What is the chemical formula of diphosphorus monobromide?
A. PBr2
B. PBr
C. P2Br2
D. P2Br
A
D. P2Br
7
Q
- Which of the following Is a chemical reaction?
A. an air conditioner cooling the air
B. none of these choices
C. bleaching your clothes
D. melting of ice
A
C. bleaching your clothes
8
Q
- Noble gases are inert because they have completed outer electron shells. Which of these elements isn’t a noble gas?
A. Chlorine
B. Krypton
C. Helium
D. Argon
A
A. Chlorine
8
Q
- What is the most common Isotope of hydrogen?
A. Hydrogen only has one isotope
B. Deuterium
C. Tritum
D. Protium
A
D. Protium
8
Q
- As you move from top to bottom down the periodic table
A. change in atomic radius cannot be predicted
B. ionization energy increases
C. electronegativity decreases
D. atomic radius decreases
A
C. electronegativity decreases
9
Q
- What do you call an atom that has more protons than electrons?
A. an anion
B. none of the choices
C. a molecule
D. an isotope
A
B. none of the choices
9
Q
- Which one of the following is a chemical equation?
A. CO2
B. C + O2 → CO2
C. Ice + heat → water
D. iron + oxygen → rust
A
B. C + O2 → CO2
9
Q
- As you move from left to right across the periodic table
A. atomic radius increases
B. Ionization energy decreases
C. electronegativity decreases
D. atomic radius decreases
A
D. atomic radius decreases
10
Q
- Balance the following equation: Ag + O2 → Ag2O
A. Put a 2 in front of Ag
B. Add a 4 in front of Ag and a 2 in front of Ag2O
C. Add a subscript 2 to the end of Ag2O
D. Add a 2 in front of Ag and a 1 in front of Ag2O
A
B. Add a 4 in front of Ag and a 2 in front of Ag2O
11
Q
- Under the Lewis concept of acid and bases, an acid is
A. An electron pair donor
B. a proton acceptor
C. a proton donor
D. an electron pair acceptor
A
D. an electron pair acceptor
11
Q
- Which is NOT an acceptable name for Hg2Cl2?
A. mercury (Il) chloride
B. mercury (I) chloride
C. mercurous chloride
D. dimercury dichloride
A
A. mercury (Il) chloride
11
Q
- Which of the following is NOT an acid?
A. milk of magnesia
B. apple juice
C. milk
D. gastric Juice
A
A. milk of magnesia
12
Q
- When NH4Cl hydrolyzes, the resulting solution is _______
A. acidic
B. basic
C. neutral
D. none of the choices
A
A. acidic
12
Q
- Aqua regia, the reagent that can be used to dissolve gold, lg a 3:1 mixture of which acids?
A. hydrochloric and nitric acids
B. hydrofluoric and nitric acids
C. hydrochloric and sulfuric acids
D. perchloric and sulfuric acids
A
A. hydrochloric and nitric acids
12
Q
- Which Of the following conjugate acid/base pairs should be used to prepare a buffer with pH near 7.15?
A. Formic acid I sodium formate (pKa — 3.74)
B. Sodium dihydrogen phosphate/ sodium hydrogen phosphate (pKa2 = 7.20)
C. Succinic acid/sodium succinate (pKa = 5.64)
D. Glycylglycine I sodium glycylglycate (pKa = 8.35)
A
B. Sodium dihydrogen phosphate/ sodium hydrogen phosphate (pKa2 = 7.20)
12
Q
- Which of the following is NOT an acid-base conjugate pair?
A. NH3 and NH4 +
B. H2S and OH-
C. H2O and OH-
D. HCN and CN-
A
B. H2S and OH-
12
Q
- During the electroplating of silver. silver ions in solution ________
A. are oxidized al the anode
B. are oxidized at the cathode
C. are reduced at the cathode
D. remain in solution unchanged
A
C. are reduced at the cathode
13
Q
- What happens to the volume of a fully inflated balloon when it is taken outside on a cold day?
A. its volume decreases
B. its volume increases
C. it remains the same
D. its volume becomes equal to zero
A
A. its volume decreases
13
Q
- Predict the products of the following acid-base reaction: NH3(aq)+ HNO3(aq)
A. no reaction takes place
B. NH4OH(aq)
C. NH2OH(aq) + HNO2(aq)
D. NH4NO3(aq)
A
D. NH4NO3(aq)
13
Q
- What is the gas which behaves the most like an ideal gas?
A. oxygen
B. nitrogen
C. helium
D. hydrogen
A
C. helium
13
Q
- The standard pressure of the atmosphere at sea level is
A. 760 mm Hg
B. all of the choices
C. 760 torr
D. 1 atm
A
B. all of the choices
13
Q
39, For this reaction
Mg + H2O → MgO + H2 which is FALSE
A. H is the oxidizing agent
B. Mg lost electrons
C. Mg is the oxidizing agent
D. H gained electrons
A
C. Mg is the oxidizing agent
13
Q
- In an electrolytic cell oxidation occurs
A. at the anode
B. between the cathode and the anode
C: at either the cathode or the anode
D. at the cathode
A
A. at the anode
13
Q
- The equation that represents a reaction that is NOT a redox reaction is:
Reaction 1: 2 H2 + O2 → 2 H2O
Reaction 2: Zn + CuSO4 → ZnSO4 + Cu
Reaction 3: 2 H2O2 → 2H2O + O2
Reaction 4: H2O + CO2 → H2CO3
A. Reaction 3
B. Reaction 1
C. Reaction 4
D. Reaction 2
A
C. Reaction 4
14
Q
- Each of these flasks contains the same number of molecules. In which container is the pressure
highest?
A. Flask 2
B. Flask 1
C. Flask 3
D. Flask 4
A
B. Flask 1
14
Q
- What Is the molar mass or an unknown gas if 1.60 grams of that gas occupies a volume of 2.24 L at
STP?
A. 35.8 g/mol
B. 160 g/mol
C. 16.0 g/mol
D. 81.0 g/mol
A
C. 16.0 g/mol
14
Q
- When chromium changes from an oxidation state of +3 to that of +6, the Cr3+ must:
A. gain 6 electrons
B. lose 6 electrons
C. lose 3 electrons
D. gain 3 electrons
A
C. lose 3 electrons
15
Q
- Which procedure is recommended for reading the level of an aqueous solution in a buret or graduated
cylinder?
A. Keep the eye level with the top of the meniscus and record that reading
B. Read both the bottom and top of the meniscus and average those readings
C. Keep the eye level with the bottom of the meniscus and record that reading
D. Look down at the meniscus at an angle to obtain the average reading directly
A
C. Keep the eye level with the bottom of the meniscus and record that reading
16
Q
- There is a definite correlation between orderliness and level of safety in the laboratory. In addition, a disorderly laboratory can hinder or endanger emergency response personnel. Which or the following
housekeeping rules should NOT be adhered to?
A. never obstruct access to exits and emergency equipment
B. properly label and store all chemicals
C. store chemical containers on the floor
D. clean work areas, including floors, regularly
A
C. store chemical containers on the floor
16
Q
- What Is the main ISO Standard used by testing and calibration laboratories to gain accreditation and
formal of their competence to carry out tests and/or calibrations, including sampling?
A. ISO/IEC 17025
B. EURACHEM
C. AOAC
D. ISO 9000:2000
A
A. ISO/IEC 17025
17
Q
- This detects contamination from reagents, sample handling and the entire measurement process.
A. matched-matrix blank
B. method blank
C. solvent blank
D. calibration blank
A
B. method blank
18
Q
- In order to ensure an accurate weighing when using the balances, one should ______
A. leave the object on the balance for several minutes to ensure a stable reading
B. not lean on the balance bench, close the draft doors on the balance and zero the balance prior to
weighing
C. turn the balance off to clear any previous weighing from its memory
D. weigh the object several times on different balances and take the average of these weighing
A
B. not lean on the balance bench, close the draft doors on the balance and zero the balance prior to
weighing
19
Q
- The method that is widely used for the determination of the protein content of meat and animal food is
the
A. Kjeldahl method
B. Mohr method
C. McBride method
D. Liebig meth0d
A
A. Kjeldahl method
19
Q
- When two materials that have different densities, like oil and water encounter one another, they will
_____.
A. separate according to their densities
B. exchange densities
C. mix uniformly
D. repel one another
A
A. separate according to their densities
19
Q
- The water content of an 875.4-mg sample of cheese was determined with a moisture analyzer. What is the %w/w H2O in the cheese if the final mass was found to be 545.8 mg?
A. 35.23%
B. 30.6%
C. 31.45%
D. 37.65%
A
D. 37.65%
19
Q
- A water sample Is collected for analysis of Oil and grease. The analysis will not be done immediately. The sample should NOT be
A. collected in plastic bottle
B. preserved with sulfuric acid
C. refrigerated til analyzed
D. collected in all glass bottle
A
A. collected in plastic bottle
20
Q
- Which of the following is NOT part of the technique for pouring in a laboratory?
A. Connect the pouring spout and receiving container using a stirring rod
B. Pour fast enough to avoid spills
C. pour and allow the liquid to ran along the stirring rod
D. Hold containers at arm’s length with elbows slightly bent
A
B. Pour fast enough to avoid spills
20
Q
- Conductivity is defined as
A. The ability of a substance to conduct electric current, which is the same as resistivity
B. The ability of a substance to repel electric current
C. The ability of a substance to conduct variable resistance
D. The ability of a substance to conduct electric current, which Is the reciprocal of resistivity
A
D. The ability of a substance to conduct electric current, which Is the reciprocal of resistivity
20
Q
- An analytical chemist needs to transfer his/her precipitant from the beaker to the filter paper. Which of the following would be the best procedure to adopt in order to ensure a quantitative transfer of the predicate?
A. none of the choices.
B. Most of the liquid above the ppt is decanted then bulk of ppt Is transferred to filter paper through a stirring rod, the beaker is washed with big volumes of wash solution.
C. Most of the liquid above the ppt is decanted first, bulk of the ppt is transferred through a stirring rod and, wash the beaker several times with small volumes of wash solution.
D. Solution is shaken, then immediately filtered; beaker Is washed with relatively big volumes of wash solution.
A
C. Most of the liquid above the ppt is decanted first, bulk of the ppt is transferred through a stirring rod and, wash the beaker several times with small volumes of wash solution.
20
Q
- Even though all solid states of other materials are denser than the liquid states of materials, what
unique property of water?
A. It is clear
B. It Is tasteless
C. Solid water (ice) is less dense than liquid water (ice floats in water)
D. It can freeze
A
C. Solid water (ice) is less dense than liquid water (ice floats in water)
21
Q
53.The following statements are true about electrical conductivity EXCEPT
A. a measure of a solutions capacity to conduct electricity
B. a measure of the total dissolved solids in a solution
C. increasing temperature has no effect on its value
D. is directly affected by temperature
A
C. increasing temperature has no effect on its value
22
Q
- The following statements are true about pH EXCEPT
A. The negative logarithm of hydrogen ions content in a solution
B. a measure of the acidity or alkalinity of a solution
C. a measure of the amount or hydrogen ions in solution
D. does not change when there are changes in temperature
A
D. does not change when there are changes in temperature
23
Q
- In maintenance and storage of pH meters. which of the following procedure shall NOT be done?
A. Mild soap solution may be used in general cleaning of the electrodes
B. To keep the electrode bulb moist during storage, store the electrode in distilled water.
C. Blot electrode dry after rinsing the pH electrodes.
D. Rinse pH electrodes in between measurements.
A
B. To keep the electrode bulb moist during storage, store the electrode in distilled water.
23
Q
- In operating a UV-Vis spectrophotometer, the following shall be done. EXCEPT for
A. Before turning on the power, check if the sample holder does not contain anything.
B. After turning on, allow the spectrophotometer to initialize and stabilize according to its user manual.
C. If there are any spillage that gets onto the instrument, immediately wipe it away.
D. Keep the sample compartment open during measurement.
A
D. Keep the sample compartment open during measurement.
24
Q
- The apparatus shown below would be used to
A. distill a liquid.
C. filter a precipitate.
B. chromatograph a mixture.
D. reflux a solution.
A
D. reflux a solution.
25
Q
- In using fume hoods. the following shall be done, EXCEPT for
A. Items contaminated with odorous or hazardous materials should be removed from the hood only after
decontamination or if placed in a closed outer container to avoid releasing contaminants into the laboratory
air.
B. The hood be kept closed except during apparatus set-up or when working within the hood
C. The hood may be used as e permanent storage area for volatile chemicals when an appropriate storage
cabinet is not available.
D. Ensure the exhaust operating before using the hood.
A
C. The hood may be used as e permanent storage area for volatile chemicals when an appropriate storage
cabinet is not available.
25
Q
- In purifying a material by crystallization choose the solvent according to the following EXCEPT
A. solubility
B. vapor pressure
C. reactivity
D. polarity
A
B. vapor pressure
26
Q
- The following are good sampling practices EXCEPT
A. Collect the sample in a container made of material that will chemically react with the sample.
B. Sample frequently enough to allow for the Identification Of process cycles.
C. Take several increments and composite them to tom the sample.
D. If possible, mix the material before getting the sample.
A
A. Collect the sample in a container made of material that will chemically react with the sample.
26
Q
- A lab analyst dissolved 4.021 g of NaOH in water and made up the solution to 1 litre with water. He then
pipetted 10.00 mL of this solution into a flask and titrated it with 0.050 M HCI solution from a burette. A volume
of 20.32 mL of acid had been used at the endpoint. Examining this result, the lab supervisor could deduce
that _____
A. the NaOH absorbed H2O from the air after its mass was measured
B. the burette was rinsed with water instead of HCI
C. the analysis is as accurate as can be expected using this apparatus
D. the pipette was rinsed with water instead of NaOH
A
B. the burette was rinsed with water instead of HCI
26
Q
- What is the law that states the linear relationship between absorbance and concentration of an
absorbing species?
A. Boyles Law
B. Beer-Lambert’s Law
C. Charles Law
D. Avogadro’s Law
A
B. Beer-Lambert’s Law
27
Q
- The dynamic range in analytical measurement refers to the range where
A. the instrument reading is constant
B. the detection limit lies
C. the sensitivity of the instrument is highest
D. the instrument reading is linearly related to the input value
A
B. the detection limit lies
27
Q
- Determine the actual volume contained in a 50.0 mL volumetric flask given the following data:
Mass of water: 50.1227 g, Density of water at 25 C: 0.99707 g/mL
A. 50.27 mL
C. 50.17 mL
B. 50.37 ml
D. 50.45 mL
A
A. 50.27 mL
28
Q
- In which of the following titrations does pH = 7.0 occur at the equivalence point?
I. Strong acid/strong base
Ill. Strong acid/Weak base
ll. Weak acid/strong base
A. Il and Ill only
B. Ill only
C. I only
D. Il only
A
C. I only
29
Q
- In liquid-liquid extraction, It is often necessary to determine which liquid is aqueous and which liquid is
nonaqueous. To test the liquids, add a drop of water to the top layer. If the drop dissolves in the top layer,
the top layer is ______
A. aqueous
B. denser
C. miscible
D. nonaqueous
A
A. aqueous
30
Q
- The substance which does the dissolving and must be greater than 50% of the solution is called
A. solute
B. solvent
C. mixture
D. solution
A
B. solvent
30
Q
- The process in which the sample is heated to the boiling point of the solvent and volatile analytes
are concentrated in the vapor phase, condensed and collected.
A. distillation
B. liquid-liquid extraction
C. evaporation
D. oven drying
A
A. distillation
31
Q
- Glass container is NOT suitable for
A. oil and grease determination
B. microbiological analyses
C. all of the choices
D. inorganic trace analyses
A
D. inorganic trace analyses
32
Q
74 How many grams of sodium hydroxide is needed to prepare 500 mL of 0.5 N sodium hydroxide?
(Sodium=22.99 g/mole. Oxygen: 16.00 g/mole, Hydrogen- 1.008 g/mole)
A. 13.8115 g
B. 15.7470 g
C. 9.9995 g
D. 10.2615 g
A
C. 9.9995 g
32
Q
- The maximum holding time for acid preserved samples that will be subjected to determination of metals
is
A 48 hours
B. 3 months
C. 6 months
D. 1 week
A
C. 6 months
32
Q
- How many grams of Sodium Persulfate (Na7S2O8) are required to prepare a 1 L solution of Sodium Persulfate With concentration of 10% (w/v). This solution is widely used as oxidizing reagent for Total Organic
Carbon analyzer (TOC).
A. 100 g of Sodium Persulfate
B. 101 g of Sodium Persulfate
C. 102 g Of Sodium Persulfate
D. 99 g Of Sodium Persulfate
A
A. 100 g of Sodium Persulfate
33
Q
- Which of the following is a primary standard for use in Standardizing bases?
A. Acetic acid
B. Sulfuric acid
C. Potassium hydrogen phthalate
D. Ammonium hydroxide
A
C. Potassium hydrogen phthalate
33
Q
- Quantitative chemical analysis of weighing a sample, usually of a separated and dried precipitate is
called
A. Gravimetric analysis
B. Elemental analysis
C. Volumetric analysis
D. Titrimetric analysis
A
A. Gravimetric analysis
34
Q
- What is the light source used In the visible range to 340-1000 nm?
A, nerst blower
B. tungsten
C. deuterium
D. Incandescent
A
B. tungsten
34
Q
- Which of the following instruments uses a cuvette?
A. Gas Chromatograph
B. U-Vis Spectrophotometer
C. pH Meter
D. Flame-MS
A
B. U-Vis Spectrophotometer
35
Q
- Minimum concentration of a substance that can be measured and reported with confidence at the
analyte concentration is greater than zero refers to _______
A Lower Warning Limit
B. Method Detection Limit
C. Control Limit
D. Limit of Quantitation
A
B. Method Detection Limit
36
Q
- Analytical methods or instruments’ performance aim for
A. Low signal-to-noise ratio
B. High variability
C. Low dynamic range
D. High signal-to-noise ratio
A
D. High signal-to-noise ratio
36
Q
- For the reaction, Fe3+ (aq) + SCN-(aq) → FeSCN2+ (aq)
can best be determined by means of
A. Ion-exchange
B. Conductance
The equilibrium constant for this reaction
C. Spectrophotometry
D. Chromatography
A
C. Spectrophotometry
36
Q
- A graphical representation of measuring signal as a function of quantity of analyte is
A. Absorbance Chart
B. Calibration curve
C. Quality Control Chart
D. none of the choices
A
B. Calibration curve
36
Q
- The most appropriate technique to determine levels or the Pb2+ ion in blood is
A. atomic absorption spectroscopy
B. mass spectrometry
C. infrared spectroscopy
D. high-performance liquid chromatography
A
A. atomic absorption spectroscopy
36
Q
- A food scientist has a sample of a plant oil and wants to determine if the oil contains saturated or
unsaturated fatty adds. Which of the following techniques would most useful for this purpose?
A. mass spectroscopy
B. ultraviolet spectroscopy
C. infrared spectroscopy
D. visible spectroscopy
A
C. infrared spectroscopy
37
Q
- What is a graph showing the detectors response as a function of elution: band’s shapes, position,
resolution?
A. monitor display
B. chromatogram
C. quality control chart
D. calibration curve
A
B. chromatogram
38
Q
- A stable light source in AAS analysis, which is necessary to emit the sharp characteristic spectrum of
the element to be determined is called
A. Tungsten lamp
B. hollow cathode lamp
C. deuterium lamp
D. Nerst blower
A
B. hollow cathode lamp
38
Q
- It is a hazardous waste characteristics which applies to wastes that have the potential to contaminate groundwater if improperly disposed of. These materials are regulated as hazardous waste due to their
potential to leach out specific toxic substances in a landfill.
A. Reactivity
B. Corrosivity
C. Toxicity
D. Ignitability
A
C. Toxicity
39
Q
- According to Revised DAO 04-36. the appropriate waste labels shall Include
A. all of the choices
B. Generator ID Number
C. Volume of Waste
D. Container Material
A
A. all of the choices
39
Q
- In handling acid wastes, what type of protective gloves should be used?
A. Rubber gloves
B. Cloth gloves
C. Disposal plastic gloves
D. Surgical gloves
A
A. Rubber gloves
39
Q
- The following acids and acid mixtures can be collected and placed in glass containers EXCEPT for
A Sulfuric acid
B. Hydrofluoric acid
C. Aqua regia
D. Hydrochloric acid
A
B. Hydrofluoric acid
40
Q
- When working with concentrated acids except hydrofluoric acid, which of the following statements are
TRUE?
l. gloves covering the whole arm or Nitrile gloves should be worn.
ll. Half- or full-faced masks with gas- and/or vapor removing respirators should be worn.
Ill. Wearing safety boots or foot covering is optional as long as tie person is working under the hood.
IV. Wearing of apron is optional as long as laboratory gown is worn.
A. I & II
B. II & III
C. all of the choices
D. I & IV
A
A. I & II
41
Q
- In order to property maintain chemical laboratory equipment one should perform the following EXCEPT
A. place the equipment in hot humid location
B. regular calibration of equipment
C. regular Inspection of operational components
D. thorough cleaning with the proper materials
A
A. place the equipment in hot humid location
41
Q
- The fire triangle consists of which of the following?
A. Oxygen, Heat, Material
B. Air, Heat. Fire
C. Air, Fuel, Spark
D. Oxygen. Heat, Fuel
A
D. Oxygen. Heat, Fuel
42
Q
- Which Is TRUE about laboratory hoods?
A. all of the choices
B. Provides further protection by diluting low of flammable gases below explosion limits.
C, It protect you from being exposed in chemical fume.
D. Must always be on
A
A. all of the choices
43
Q
- Which of the following may be disposed In the Sink?
A. 0.1M H2SO4
B. 1 g/ml PCl4
C. none of the choices
D. 200 g/ml PCl4
A
C. none of the choices
43
Q
- What is the type of chemical that can cause an allergic reaction in the airways following inhalation of
chemical
A. Corrosive
B. Respiratory Sensitizer
C. oxidizer
D. Carcinogen
A
B. Respiratory Sensitizer
44
Q
- Ammonia solution can be stored with the following chemicals EXCEPT for
A. cyclohexane solution
B. acetic acid solution
C. 2-propanol solution
D. sodium hydroxide solution
A
B. acetic acid solution
45
Q
- Which of the following Can Cause ERRORS during the sample preparation stage?
l. Loss of sample during weighing or dissolution
Il. Contamination by impurities in reagents and in the environment
Ill. Changes in mass due to varying humidity and temperature
IV. Obtaining inhomogeneous sample from the bulk
A. l and Il only
B. l, Ill. and IV
C. l, Il, and Ill
D. I, II, Ill, and IV
A
D. I, II, Ill, and IV
46
Q
- What will you perform to know that Atomic absorption spectrometer continues to work property?
A. Calibration check
B. Blank
C. QC sample recoveries
D. Standard addition
A
A. Calibration check
47
Q
- Consider that you are working with Vitamin C table production, to which standard’s should your quality
management should subscribe?
A. GMP
B. HACCP
C. ISO 9001:2008
D. All of the choices
A
D. All of the choices
48
Q
- The test that decides whether a datum from a given set could be rejected or NOT IS
A. T-test
B. Z-test
C. Q-test
D. F-test
A
C. Q-test
49
Q
- Saying that the concentration of Total cyanide (CN-) In drinking water is 0.05 mg/L. which is below the
maximum allowable level of 0.07 mg/L as per DOH DAO No. 20070012 when it is actually that limit is above
that limit is _____.
A. accurate
B. false negative
C. precise
D. false positive
A
B. false negative
