AERT 3540 Mid Multi Choice Flashcards
As a result of aviation demand bring derived instead of autonomous, the following impacts are expected to happen except:
the Need to fly is increased
which of the following is not one of the main components of the aviation industry in the US
- aircraft operations
- aviation interest/industry groups
- international civil aviation organization
- pilots
International Civil Aviation Organization
Which agency of the federal government is responsible to monitor the incidents and accidents that occur in the aviation industry?
- TSA
- FAA
- NTSB
-TSB
NTSB
which of the following entities have the ability to adopt new aviation multilateral regulations
- International Non-Governmental Organizations
- International Governmental Organizations
- Domestic Trade/ Professional organizations
- lobbyist groups
International government organizations
A ___ is a specification that ICAO member state should adopt
- treaty
- standard
- recommended practice
- cabotage
Recommended Practice
In 1997, The Boeing company merged with McDonnell Douglas in a US$13 billion stock swap with Boeing being the surviving company. Each of these companies was an aerospace/aircraft manufacturer. This is an example of a __________ type of consolidation
- vertical concentration
- nationally
- horizontal concentration
- suprantional
horizontal concentration
Annexes to the Chicago Convention contain Standards and Recommended Practices (SARPs) which Member States must abide by and those they comply with. The convention originally established __________ and currently has ________ annexes.
- 13 and 21
- 19 and 25
- 12 and 19
- 9 and 15
12 and 19
Which of the following international organizations was a result of the first attempts to create aviation multilateral regulations?
- IATA
-ICAO
-ICAN
-AOPA
ICAN
A __________ is a specification that contracting ICAO Member States will conform with and adopt
- recommended practices
- cabotage
- standard
- treaty
Standard
The sovereign body of the International Civil Aviation Organization (ICAO) is its Assembly, with representatives from 193 Member States. ICAO’s Assembly meets at least once every
- 2 years
- 6 mo
- 3 years
- 1 year
3 years
_____________ are unpowered aircraft that require assistance (such as from a tow aircraft). Once airborne, gliders can take advantage of air current to maintain and even gain altitude
Gliders
Airships
Aeroplanes
Rotorcrafts
Gliders
______________ is specifically defined as a lease of an aircraft without any crewmembers
Operating Lease
Capital Lease
Wet Lease
Dry Lease
dry lease
______________ is specifically defined in the federal regulations as a lease of an aircraft with at least one cabin crewmember.
Dry Lease
Capital Lease
Operating Lease
Wet Lease
wet lease
_____________ is a modified turbojet with a large fan at the front of the engine, which improves thrust at lower speeds and makes the engine quieter.
Turboshaft
Turbofan
Ramjet
Turbojet
turbofan
Wet Leases must be operated under Part ______ regulations
121
145
91
135
135
Which of the following aircraft would be considered as long range (twin-aisle) ones?
A220-300 | B777-200 | B737 Max 8
A320 | E170 | E190
Q400 | A330-200 | B787-8
A330-200 | B787-8 | B777-9
A330-200 l B787-8 l B777-9
Which of the following is not one of the data obtained after utilizing travel-to-location simulations during a cost-benefit analysis?
The amount of time spent at locations
The most frequently visited locations
The range and time to get to locations
Budget range affordability
budget range affordability
One of the results of the General Aviation Revitalization Act (GARA) of 1994 was to reduce the liability period for the aviation maintenance shops down to ______ years
10
20
18
15
18
_________ refers to work conducted on the aircraft on the flight line, while the aircraft is in active service. This work includes daily checks, turnaround maintenance, and short interval checks
Base Maintenance
A Check Maintenance
Shop Maintenance
Line Maintenance
line maintenance
___________ is the type of maintenance task performed on aircraft parts that have been removed from the aircraft. Shop maintenance can take place in electronics or avionics shops, engine shops, and component shops, among other places. These shops may be physically separate places or combined, depending on the operation.
Line Maintenance
A Check Maintenance
Base Maintenance
Shop Maintenance
shop maintenance
Which of the following regulations cover the certification of the aviation maintenance technicians (airmen other than the flight crew members)
FAR Part 145
FAR Part 65
FAR Part 39
FAR Part 43
part 65