TRAINING MANUAL Flashcards
SCBA SEMS
Scott Electronic Management System
SCBA EBSS
Emergency Breathing Support System
45 min SCBA bottle cu. ft. of air
65
Frangible disk rupture pressure/ratio
5/3 or 7500 psi
SCBA Airflow path
Cylinder–>high pres. hose–>pres. reducer–>primary, secondary, low cylinder trans. valve, low pres hose, remote gauge, MMR
SCBA Components
Back frame and harness, cylinder/valve, face piece, regulator and low pres hose w/ vibralert low air warn Pres reducer and high pressure hose SEMS/PASS
SCBA P.A.S.S.
Personal alert safety system
SCBA Primary and secondary pressures
primary-100 psi
secondary-150 psi
Vibralert activation parameters
1100 psi
20-25%
MMR capacity capability
excess of 500 LPM
Purge knob capacity
at least 125 LPM
SCBA bottle filling rate
1500 psi/min
Margin allowed between cylinder and remote gauge
200 psi
SCBA leak test
100 psi in 30 seconds
SCBA cut/gouge dimensions allowed
1” long and .09” (2 dimes) thick
SCBA abrasion dimensions
.45”( 1 dime thickness) and 4 sq in.
SCBA peeling bands
1/8” or wider
SCBA disinfecting
70% ethyl, methyl, isopropyl alcohol
2 tablespoons bleach in gallon of water (10 minutes)
Full SCBA cylinder with purge fully open will last…..
10 min
SCBA batteries in auto mode will last
60 hours
SCBA batteries in full alarm will last
8 hours
akron Turbo Jet #1701 size and settings
1” nozzle
12-23-30-flush