*TB 155- Wildland Urban Interface Structure Protection Flashcards
Wild land urban interface structure protection:
______ is a preplanned area where firefighters can immediately take
refuge for temporary shelter and short-term relief without using a fire shelter in the event that emergency egress to an established Safety Zone is compromised.
Temporary Refuge Area (TRA)
What are the three types of structural triage categories?
- not-threatened
- threatened defensible
- threatened non-defensible (lack of safety zone and temporary refuge area)
Wild land interface Structure protection:
Which structure protection tactic is used in a rapid evaluation to check for occupants requiring removal or rescue?
•This tactic is when there is no Safety Zone or TRA present and the projected impact time of the fire front prohibit resources from taking preparation action to protect the structure.
Check and go
Wild land interface Structure protection:
Which tactic is used when a Safety Zone and TRA are not present and/or when fire spread and intensity are too dangerous to stay in the area when the fire front arrives, but there is adequate time to prepare a structure for defense ahead of the fire front?
Prep and go
Wild land interface Structure protection:
Which tactic is used when a Safety Zone and TRA are present and adequate time exists to safely prepare a structure for defense prior to the arrival of the fire front. Fire behavior MUST be such that it is safe for firefighters to remain and engage the fire.
Prep and defend
Wild land interface Structure protection:
_____ is a follow up tactic employed when Check and Go, Prep and Go, or Bump and Run tactics are initially used. It is used to come in behind the fire front. The goal of is to search for victims, effect perimeter control, extinguish spot fires around structures, control hot spots and reduce ember production.
Fire front following
Wild land interface Structure protection:
______ is a tactic where resources typically move ahead of the fire front in the spotting zone to extinguish spot fires and hot spots, and to defend as many structures as possible.
Bump and run
Wild land interface Structure protection:
_____ is a tactic utilizing control lines and large water streams from fixed water supplies in an attempt to stop fire spread. The goal is to extinguish structure fires, protect exposures, and reduce ember production. It can be referred to as taking a stand to stop the progression of the fire.
Anchor and hold
Wild land interface Structure protection:
Maintain a ____ ft distance from transmission lines
35’
Wild land interface Structure protection:
Spot fires or low ground fires can be fought with hose lines if heavy smoke or flame is not within ____ ft of the power lines
100 ft
Wild land urban interface structure protection:
Selecting the appropriate structure triage category (not-threatened, threatened defensible, threatened non-defensible) is based on what three things?
- forecasted fire behavior
- surrounding area terrain
- any defensible space