*Logbooks Apparatus Onan Generator

Question 1

All rigs- what is the max time you should manually preheat the Onan Generator?

Answer 1

30 sec max

Question 2

How many amps are supplied to the two receptacles on the electrical cord reel outlet box?

Answer 2

20 amps

Question 3

When stopping the Genset, let it cool down by running at no-load for ___ to ___ minutes.

Answer 3

3-5 min

Question 4

Onan Generator- Normal operating engine oil pressure?

Answer 4

28-64 psi

Question 5

Onan Generator- normal engine coolant operating temperature?

Answer 5

160°-195°F

Question 6

Onan Generator- rated kilowatt output?

Answer 6

7.5kw

Question 7

‘00 to ‘09 Rigs:

The Onan electrical panel consists of how many circuit breakers?

Answer 7

12

Question 8

The Onan electrical panel consists of how many circuit breakers for the ‘95 Simon?

How many for the ‘96?

Answer 8

10

11

Question 9

‘06 ALF Onan Generator:

When the Generator Logic Control is set for AUTO, the generator will start when the house batteries are below ____ Volts and will run until the battery voltage has exceeded ____ volts for one hour.

Answer 9

12. 1v

13. 3v

Question 10

‘06 ALF Onan Generator:

Once the manual start button is pushed the Onan will crank for 5 seconds in order to start. How many starting attempts will the Onan make before a “Gen Fail” message appears on the control panel?

Answer 10

5

Question 11

What rpm does the Onan operate at?

Answer 11

1800

Question 12

How many amps does the Onan generator supply?

How many hertz?

Answer 12

31 amps

60 Hz

Question 13

How many quarts of 15w-40 motor oil does the Onan generator hold?

Answer 13

4

Question 14

All Rigs- Where are the 3 locations that you will find the controls for the Onan Generator?

Answer 14

1. On generator itself
2. In cab
3. Control box in left side compartment on chassis